Hello,
Huawei E303 modem now detaches in OpenBSD 6.5 This works fine on
OpenBSD 6.2 same machine.
Regards
Kihaguru.
www# dmesg
OpenBSD 6.5 (GENERIC.MP) #3: Sat Apr 13 14:48:43 MDT 2019
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4142624768 (3950MB)
avail mem = 4007448576 (3821MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xed7e0 (66 entries)
bios0: vendor Hewlett-Packard version "786E3 v02.10" date 01/25/2007
bios0: Hewlett-Packard HP Compaq dc5750 Microtower
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC ASF! MCFG TCPA SLIC HPET
acpi0: wakeup devices COM1(S4) PCI0(S4) PEG1(S4) IGFX(S4) PCX1(S4)
PCX2(S4) HUB_(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3)
EUS1(S3) PBTN(S4)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+, 2095.06 MHz, 0f-6b-01
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,3DNOWP
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+, 2094.75 MHz, 0f-6b-01
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,3DNOWP
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-64
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG1)
acpiprt2 at acpi0: bus 1 (IGFX)
acpiprt3 at acpi0: bus -1 (PCX1)
acpiprt4 at acpi0: bus 63 (PCX2)
acpiprt5 at acpi0: bus 7 (HUB_)
acpicpu0 at acpi0: C1(@1 halt!), PSS
acpicpu1 at acpi0: C1(@1 halt!), PSS
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
"PNP0003" at acpi0 not configured
acpibtn0 at acpi0: PBTN
"PNP0C14" at acpi0 not configured
cpu0: PowerNow! K8 2095 MHz: speeds: 2100 2000 1800 1000 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "ATI RS480 Host" rev 0x10
ppb0 at pci0 dev 1 function 0 "ATI RS480 PCIE" rev 0x00
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 5 function 0 "ATI Radeon XPRESS 200" rev 0x00
drm0 at radeondrm0
radeondrm0: apic 2 int 17
vendor "ATI", unknown product 0x5874 (class display subclass
miscellaneous, rev 0x00) at pci1 dev 5 function 1 not configured
ppb1 at pci0 dev 7 function 0 "ATI RX480 PCIE" rev 0x00: msi
pci2 at ppb1 bus 63
bge0 at pci2 dev 0 function 0 "Broadcom BCM5755" rev 0x02, BCM5755 A2
(0xa002): msi, address 00:1f:29:dc:de:9b
brgphy0 at bge0 phy 1: BCM5755 10/100/1000baseT PHY, rev. 0
ahci0 at pci0 dev 18 function 0 "ATI SB600 SATA" rev 0x00: apic 2 int
22, AHCI 1.1
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 3.0Gb/s
ahci0: port 2: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, ST380815AS, 3.CH> SCSI3 0/direct
fixed t10.ATA_ST380815AS_9RW7BGSY_
sd0: 76319MB, 512 bytes/sector, 156301488 sectors
sd1 at scsibus1 targ 1 lun 0: <ATA, ST380815AS, 3.CH> SCSI3 0/direct
fixed t10.ATA_ST380815AS_9RW6J93H_
sd1: 76319MB, 512 bytes/sector, 156301488 sectors
cd0 at scsibus1 targ 2 lun 0: <ATAPI, DVD A DH16A3L, 8H3D> ATAPI
5/cdrom removable
ohci0 at pci0 dev 19 function 0 "ATI SB600 USB" rev 0x00: apic 2 int
16, version 1.0, legacy support
ohci1 at pci0 dev 19 function 1 "ATI SB600 USB" rev 0x00: apic 2 int
17, version 1.0, legacy support
ohci2 at pci0 dev 19 function 2 "ATI SB600 USB" rev 0x00: apic 2 int
18, version 1.0, legacy support
ohci3 at pci0 dev 19 function 3 "ATI SB60spdmem0 at iic0 addr 0x50:
1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-5300CL5
pciide0 at pci0 dev 20 function 1 "ATI SB600 IDE" rev 0x00: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 2 int 16 for native-PCI interrupt
azalia0 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 2 int 16
azalia0: codecs: Realtek ALC260
audio0 at azalia0
pcib0 at pci0 dev 20 function 3 "ATI SB600 ISA" rev 0x00
ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci3 at ppb2 bus 7
pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00:
core rev BH-G1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "ATI OHCI root hub" rev
1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "ATI OHCI root hub" rev
1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "ATI OHCI root hub" rev
1.00/1.00 addr 1
usb4 at ohci3: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "ATI OHCI root hub" rev
1.00/1.00 addr 1
usb5 at ohci4: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "ATI OHCI root hub" rev
1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
vmm0 at mainbus0: SVM
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR RAID 1, 006> SCSI2 0/direct fixed
sd2: 76316MB, 512 bytes/sector, 156295793 sectors
root on sd2a (980d73a9f0635deb.a) swap on sd2b dump on sd2b
initializing kernel modesetting (RS480 0x1002:0x5974 0x103C:0x280A).
error: [drm:pid0:radeon_get_legacy_connector_info_from_bios] *ERROR*
Unknown connector type: 8
radeondrm0: 1920x1080, 32bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
umsm0 at uhub0 port 10 configuration 1 interface 0 "HUAWEI HUAWEI
Mobile" rev 2.00/1.02 addr 2
umsm1 at uhub0 port 10 configuration 1 interface 1 "HUAWEI HUAWEI
Mobile" rev 2.00/1.02 addr 2
umsm0 detached
umsm1 detached
umsm0 at uhub0 port 10 configuration 1 interface 0 "HUAWEI HUAWEI
Mobile" rev 2.00/1.02 addr 2
ucom0 at umsm0
umsm1 at uhub0 port 10 configuration 1 interface 1 "HUAWEI HUAWEI
Mobile" rev 2.00/1.02 addr 2
ucom1 at umsm1
umsm2 at uhub0 port 10 configuration 1 interface 2 "HUAWEI HUAWEI
Mobile" rev 2.00/1.02 addr 2
ucom2 at umsm2
umass0 at uhub0 port 10 configuration 1 interface 3 "HUAWEI HUAWEI
Mobile" rev 2.00/1.02 addr 2
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
cd1 at scsibus4 targ 1 lun 0: <HUAWEI, Mass Storage, 2.31> SCSI2
5/cdrom removable
umass1 at uhub0 port 10 configuration 1 interface 4 "HUAWEI HUAWEI
Mobile" rev 2.00/1.02 addr 2
umass1: using SCSI over Bulk-Only
scsibus5 at umass1: 2 targets, initiator 0
sd3 at scsibus5 targ 1 lun 0: <HUAWEI, SD Storage, 2.31> SCSI2
0/direct removable
ucom0 detached
umsm0 detached
ucom1 detached
umsm1 detached
ucom2 detached
umsm2 detached
cd1 detached
scsibus4 detached
0 USB" rev 0x00: apic 2 int 17, version 1.0, legacy support
ohci4 at pci0 dev 19 function 4 "ATI SB600 USB" rev 0x00: apic 2 int
18, version 1.0, legacy support
ehci0 at pci0 dev 19 function 5 "ATI SB600 USB2" rev 0x00: apic 2 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "ATI EHCI root hub" rev
2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x13: SMI
iic0 at piixpm0umass0 detached
sd3 detached
scsibus5 detached
umass1 detached
uhub0: device problem, disabling port 10
syncing disks... done
OpenBSD 6.5 (GENERIC.MP) #3: Sat Apr 13 14:48:43 MDT 2019
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4142624768 (3950MB)
avail mem = 4007444480 (3821MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xed7e0 (66 entries)
bios0: vendor Hewlett-Packard version "786E3 v02.10" date 01/25/2007
bios0: Hewlett-Packard HP Compaq dc5750 Microtower
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC ASF! MCFG TCPA SLIC HPET
acpi0: wakeup devices COM1(S4) PCI0(S4) PEG1(S4) IGFX(S4) PCX1(S4)
PCX2(S4) HUB_(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3)
EUS1(S3) PBTN(S4)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+, 2095.05 MHz, 0f-6b-01
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,3DNOWP
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+, 2094.75 MHz, 0f-6b-01
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,3DNOWP
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-64
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG1)
acpiprt2 at acpi0: bus 1 (IGFX)
acpiprt3 at acpi0: bus -1 (PCX1)
acpiprt4 at acpi0: bus 63 (PCX2)
acpiprt5 at acpi0: bus 7 (HUB_)
acpicpu0 at acpi0: C1(@1 halt!), PSS
acpicpu1 at acpi0: C1(@1 halt!), PSS
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
"PNP0003" at acpi0 not configured
acpibtn0 at acpi0: PBTN
"PNP0C14" at acpi0 not configured
cpu0: PowerNow! K8 2095 MHz: speeds: 2100 2000 1800 1000 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "ATI RS480 Host" rev 0x10
ppb0 at pci0 dev 1 function 0 "ATI RS480 PCIE" rev 0x00
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 5 function 0 "ATI Radeon XPRESS 200" rev 0x00
drm0 at radeondrm0
radeondrm0: apic 2 int 17
vendor "ATI", unknown product 0x5874 (class display subclass
miscellaneous, rev 0x00) at pci1 dev 5 function 1 not configured
ppb1 at pci0 dev 7 function 0 "ATI RX480 PCIE" rev 0x00: msi
pci2 at ppb1 bus 63
bge0 at pci2 dev 0 function 0 "Broadcom BCM5755" rev 0x02, BCM5755 A2
(0xa002): msi, address 00:1f:29:dc:de:9b
brgphy0 at bge0 phy 1: BCM5755 10/100/1000baseT PHY, rev. 0
ahci0 at pci0 dev 18 function 0 "ATI SB600 SATA" rev 0x00: apic 2 int
22, AHCI 1.1
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 3.0Gb/s
ahci0: port 2: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, ST380815AS, 3.CH> SCSI3 0/direct
fixed t10.ATA_ST380815AS_9RW7BGSY_
sd0: 76319MB, 512 bytes/sector, 156301488 sectors
sd1 at scsibus1 targ 1 lun 0: <ATA, ST380815AS, 3.CH> SCSI3 0/direct
fixed t10.ATA_ST380815AS_9RW6J93H_
sd1: 76319MB, 512 bytes/sector, 156301488 sectors
cd0 at scsibus1 targ 2 lun 0: <ATAPI, DVD A DH16A3L, 8H3D> ATAPI
5/cdrom removable
ohci0 at pci0 dev 19 function 0 "ATI SB600 USB" rev 0x00: apic 2 int
16, version 1.0, legacy support
ohci1 at pci0 dev 19 function 1 "ATI SB600 USB" rev 0x00: apic 2 int
17, version 1.0, legacy support
ohci2 at pci0 dev 19 function 2 "ATI SB600 USB" rev 0x00: apic 2 int
18, version 1.0, legacy support
ohci3 at pci0 dev 19 function 3 "ATI SB600 USB" rev 0x00: apic 2 int
17, version 1.0, legacy support
ohci4 at pci0 dev 19 function 4 "ATI SB600 USB" rev 0x00: apic 2 int
18, version 1.0, legacy support
ehci0 at pci0 dev 19 function 5 "ATI SB600 USB2" rev 0x00: apic 2 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "ATI EHCI root hub" rev
2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x13: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-5300CL5
pciide0 at pci0 dev 20 function 1 "ATI SB600 IDE" rev 0x00: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 2 int 16 for native-PCI interrupt
azalia0 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 2 int 16
azalia0: codecs: Realtek ALC260
audio0 at azalia0
pcib0 at pci0 dev 20 function 3 "ATI SB600 ISA" rev 0x00
ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci3 at ppb2 bus 7
pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00:
core rev BH-G1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "ATI OHCI root hub" rev
1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "ATI OHCI root hub" rev
1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "ATI OHCI root hub" rev
1.00/1.00 addr 1
usb4 at ohci3: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "ATI OHCI root hub" rev
1.00/1.00 addr 1
usb5 at ohci4: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "ATI OHCI root hub" rev
1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
vmm0 at mainbus0: SVM
umsm0 at uhub0 port 10 configuration 1 interface 0 "HUAWEI HUAWEI
Mobile" rev 2.00/1.02 addr 2
ucom0 at umsm0
umsm1 at uhub0 port 10 configuration 1 interface 1 "HUAWEI HUAWEI
Mobile" rev 2.00/1.02 addr 2
ucom1 at umsm1
umsm2 at uhub0 port 10 configuration 1 interface 2 "HUAWEI HUAWEI
Mobile" rev 2.00/1.02 addr 2
ucom2 at umsm2
umass0 at uhub0 port 10 configuration 1 interface 3 "HUAWEI HUAWEI
Mobile" rev 2.00/1.02 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
cd1 at scsibus2 targ 1 lun 0: <HUAWEI, Mass Storage, 2.31> SCSI2
5/cdrom removable
umass1 at uhub0 port 10 configuration 1 interface 4 "HUAWEI HUAWEI
Mobile" rev 2.00/1.02 addr 2
umass1: using SCSI over Bulk-Only
scsibus3 at umass1: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <HUAWEI, SD Storage, 2.31> SCSI2
0/direct removable
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
sd3 at scsibus5 targ 1 lun 0: <OPENBSD, SR RAID 1, 006> SCSI2 0/direct fixed
sd3: 76316MB, 512 bytes/sector, 156295793 sectors
softraid0: volume sd3 is roaming, it used to be sd2, updating metadata
root on sd3a (980d73a9f0635deb.a) swap on sd3b dump on sd3b
initializing kernel modesetting (RS480 0x1002:0x5974 0x103C:0x280A).
error: [drm:pid0:radeon_get_legacy_connector_info_from_bios] *ERROR*
Unknown connector type: 8
radeondrm0: 1920x1080, 32bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
umsm0: this device is not using CDC notify message in intr pipe.
Please send your dmesg to <bugs@openbsd.org>, thanks.
umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
www#
