On Mon, May 25, 2020 at 01:04:33AM -0700, bsah...@sbcglobal.net wrote: > >Synopsis: <Intel Wireless AC 3160 fails to connect to access point> > >Category: <system> > >Environment: > System : OpenBSD 6.7 > Details : OpenBSD 6.7-current (GENERIC.MP) #213: Sat May 23 > 20:38:40 MDT 2020 > > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > Architecture: OpenBSD.amd64 > Machine : amd64 > >Description: > <In OpenBSD 6.7-release and OpenBSD 6.7-current iwm fails to connect to > the access point > that worked in OpenBSD 6.6-stable and previous. Specifically, the > hardware reports: > iwm0: hw rev 0x160, fw ver 17.3216344376.0, address f4:06:69:e5:dc:24 > iwm0: begin active scan > iwm0: INIT -> SCAN > iwm0: end active scan > iwm0: + 38:3b:c8:21:5d:fa 11 +58 54M ess privacy rsn > "Sonic-278" > iwm0: - 86:8f:cf:17:f1:33 153 +17 54M ess privacy rsn > "ATTKTeHqDS"! > iwm0: - 94:8f:cf:17:f1:33 153 +15 54M ess privacy rsn ""! > iwm0: - c6:52:61:8b:65:72 157 +17 54M ess privacy rsn ""! > iwm0: - c8:52:61:8b:65:72 157 +17 54M ess privacy rsn > "NETGEAR84_2GEXT"! > iwm0: - d6:52:61:8b:65:72 157 +18 54M ess privacy rsn! ""! > iwm0: - f0:72:ea:24:8c:5a 6 +17 54M ess privacy rsn "MARS"! > iwm0: SCAN -> AUTH > iwm0: sending auth to 38:3b:c8:21:5d:fa on channel 11 mode 11g > iwm0: AUTH -> ASSOC > iwm0: sending assoc_req to 38:3b:c8:21:5d:fa on channel 11 mode 11g > iwm0: ASSOC -> RUN > iwm0: associated with 38:3b:c8:21:5d:fa ssid "Sonic-278" channel 11 > start MCS 0 long preamble short slot time HT enabled > iwm0: missed beacon threshold set to 30 beacons, beacon interval is 100 > TU > iwm0: received msg 1/4 of the 4-way handshake from 38:3b:c8:21:5d:fa > iwm0: sending msg 2/4 of the 4-way handshake to 38:3b:c8:21:5d:fa > iwm0: received msg 1/4 of the 4-way handshake from 38:3b:c8:21:5d:fa > iwm0: sending msg 2/4 of the 4-way handshake to 38:3b:c8:21:5d:fa > iwm0: received msg 1/4 of the 4-way handshake from 38:3b:c8:21:5d:fa > iwm0: sending msg 2/4 of the 4-way handshake to 38:3b:c8:21:5d:fa > iwm0: received msg 1/4 of the 4-way handshake from 38:3b:c8:21:5d:fa > iwm0: sending msg 2/4 of the 4-way handshake to 38:3b:c8:21:5d:fa
If the handshake fails like this, that usually means the key is wrong. Are you sure the WPA key is configured correctly? Does it work on an unecrypted AP? Does it work on a different WPA AP?
