Hey Carlos, I've spent a bit of time today trying to figure out what's going on here, and haven't found anything that looks wrong with carp in 6.8.
I did have a lot of trouble trying to reproduce it though, but that's because some of the switches involved seem to be "helping" and filtering packets sent from a multicast MAC address. I could see the carp interface get arp requests for the shared IP, and reply to them, but I never saw the replies on any other machine. However, I was able to build a test setup with carp on top of nvgre between a bunch of machines, and that abstracted me enough off the physical network to test with. As expected, it all worked fine. The only thing that's changing in your setup is the openbsd version? You're not upgrading the host machines or using different physical switches at the same time or anything? To debug this further I'd like to look at packet captures. Can you tcpump on the carp hosts and the client machines? If possible, captures from a 6.7 setup too would be nice. Cheers, dlg > On 5 Jan 2021, at 1:59 am, Carlos Lopez <clo...@outlook.com> wrote: > > Good afternoon, > > Any news about this bug? > > On 21/10/20, 12:37, "owner-b...@openbsd.org on behalf of Carlos Lopez" > <owner-b...@openbsd.org on behalf of clo...@outlook.com> wrote: > > Hi all, > > Before upgrade from OpenBSD 6.7 to OpenBSD 6.8, my pair firewalls was > using carp in IP balance mode without problems from several months. These > firewalls are installed in a RHEL 8.2 (fully patched) KVM host. > > After upgrading to OpenBSD 6.8, carp ip balance mode doesn’t works. I have > tested reconfiguring balance mode for ip-stealth and ip-unicast also and the > result is always the same: network packets are not processed by firewalls. > But if I configure CARP using “the simple configuration” and one node is > master and the other is backup all it is working without problems. > > All CARP interfaces are configured as this one: > > carpdev vio0 balancing ip pass 7254e4bc3024e35490e4b9942f919e9b > inet 172.22.55.30 0xffffffe0 172.22.55.31 > carpnodes 10:0,11:100 > description "Production Network" > > sysctl.conf file: > > net.inet.carp.preempt=1 > net.inet.carp.log=2 > net.inet.ip.forwarding=1 > net.inet.tcp.mssdflt=1440 > net.inet.ip.redirect=0 > net.inet.ip.mtudisc=0 > net.inet.tcp.rfc3390=1 > net.inet.ip.arptimeout=60 > kern.bufcachepercent=70 > net.inet.icmp.tstamprepl=0 > net.inet.udp.sendspace=262144 > net.inet.udp.recvspace=262144 > > > OpenBSD kvm guest config: > > <domain type='kvm' id='12'> > <name>obsdfw01</name> > <description>OpenBSD Security Gateway Cluster</description> > <memory unit='KiB'>786432</memory> > <currentMemory unit='KiB'>786432</currentMemory> > <vcpu placement='static'>1</vcpu> > <resource> > <partition>/machine</partition> > </resource> > <os> > <type arch='x86_64' machine='pc-q35-rhel7.6.0'>hvm</type> > <boot dev='hd'/> > </os> > <features> > <acpi/> > <apic/> > </features> > <cpu mode='custom' match='exact' check='full'> > <model fallback='forbid'>Broadwell</model> > <feature policy='require' name='vme'/> > <feature policy='require' name='f16c'/> > <feature policy='require' name='rdrand'/> > <feature policy='require' name='hypervisor'/> > <feature policy='require' name='arat'/> > <feature policy='require' name='xsaveopt'/> > <feature policy='require' name='abm'/> > </cpu> > <clock offset='utc'> > <timer name='rtc' tickpolicy='catchup'/> > <timer name='pit' tickpolicy='delay'/> > <timer name='hpet' present='yes'/> > </clock> > <on_poweroff>destroy</on_poweroff> > <on_reboot>restart</on_reboot> > <on_crash>destroy</on_crash> > <pm> > <suspend-to-mem enabled='no'/> > <suspend-to-disk enabled='no'/> > </pm> > <devices> > <emulator>/usr/libexec/qemu-kvm</emulator> > <disk type='file' device='disk'> > <driver name='qemu' type='qcow2' cache='none'/> > <source file='/data/vmvol0/vmachines/obsdfw01vol.img'/> > <backingStore/> > <target dev='vda' bus='virtio'/> > <alias name='virtio-disk0'/> > <address type='pci' domain='0x0000' bus='0x0b' slot='0x00' > function='0x0'/> > </disk> > <controller type='usb' index='0' model='none'> > <alias name='usb'/> > </controller> > <controller type='virtio-serial' index='0'> > <alias name='virtio-serial0'/> > <address type='pci' domain='0x0000' bus='0x0a' slot='0x00' > function='0x0'/> > </controller> > <controller type='pci' index='0' model='pcie-root'> > <alias name='pcie.0'/> > </controller> > <controller type='pci' index='1' model='pcie-root-port'> > <model name='pcie-root-port'/> > <target chassis='1' port='0x10'/> > <alias name='pci.1'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x02' > function='0x0' multifunction='on'/> > </controller> > <controller type='pci' index='2' model='pcie-root-port'> > <model name='pcie-root-port'/> > <target chassis='2' port='0x11'/> > <alias name='pci.2'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x02' > function='0x1'/> > </controller> > <controller type='pci' index='3' model='pcie-root-port'> > <model name='pcie-root-port'/> > <target chassis='3' port='0x12'/> > <alias name='pci.3'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x02' > function='0x2'/> > </controller> > <controller type='pci' index='4' model='pcie-root-port'> > <model name='pcie-root-port'/> > <target chassis='4' port='0x13'/> > <alias name='pci.4'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x02' > function='0x3'/> > </controller> > <controller type='pci' index='5' model='pcie-root-port'> > <model name='pcie-root-port'/> > <target chassis='5' port='0x14'/> > <alias name='pci.5'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x02' > function='0x4'/> > </controller> > <controller type='pci' index='6' model='pcie-root-port'> > <model name='pcie-root-port'/> > <target chassis='6' port='0x15'/> > <alias name='pci.6'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x02' > function='0x5'/> > </controller> > <controller type='pci' index='7' model='pcie-root-port'> > <model name='pcie-root-port'/> > <target chassis='7' port='0x16'/> > <alias name='pci.7'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x02' > function='0x6'/> > </controller> > <controller type='pci' index='8' model='pcie-root-port'> > <model name='pcie-root-port'/> > <target chassis='8' port='0x17'/> > <alias name='pci.8'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x02' > function='0x7'/> > </controller> > <controller type='pci' index='9' model='pcie-root-port'> > <model name='pcie-root-port'/> > <target chassis='9' port='0x18'/> > <alias name='pci.9'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x03' > function='0x0' multifunction='on'/> > </controller> > <controller type='pci' index='10' model='pcie-root-port'> > <model name='pcie-root-port'/> > <target chassis='10' port='0x19'/> > <alias name='pci.10'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x03' > function='0x1'/> > </controller> > <controller type='pci' index='11' model='pcie-root-port'> > <model name='pcie-root-port'/> > <target chassis='11' port='0x1a'/> > <alias name='pci.11'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x03' > function='0x2'/> > </controller> > <controller type='pci' index='12' model='pcie-root-port'> > <model name='pcie-root-port'/> > <target chassis='12' port='0x1b'/> > <alias name='pci.12'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x03' > function='0x3'/> > </controller> > <controller type='pci' index='13' model='pcie-root-port'> > <model name='pcie-root-port'/> > <target chassis='13' port='0x1c'/> > <alias name='pci.13'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x03' > function='0x4'/> > </controller> > <controller type='sata' index='0'> > <alias name='ide'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' > function='0x2'/> > </controller> > <interface type='bridge'> > <mac address='00:50:56:6f:64:aa'/> > <source bridge='prodif'/> > <target dev='obsdprod0'/> > <model type='virtio'/> > <alias name='net0'/> > <address type='pci' domain='0x0000' bus='0x01' slot='0x00' > function='0x0'/> > </interface> > <interface type='bridge'> > <mac address='00:50:56:ab:44:05'/> > <source bridge='pubif'/> > <target dev='obsdpub0'/> > <model type='virtio'/> > <alias name='net1'/> > <address type='pci' domain='0x0000' bus='0x02' slot='0x00' > function='0x0'/> > </interface> > <interface type='bridge'> > <mac address='00:50:56:3c:e5:61'/> > <source bridge='mgmtif'/> > <target dev='obsdmgmt0'/> > <model type='virtio'/> > <alias name='net2'/> > <address type='pci' domain='0x0000' bus='0x03' slot='0x00' > function='0x0'/> > </interface> > <interface type='bridge'> > <mac address='00:50:56:4c:d6:34'/> > <source bridge='dmzif'/> > <target dev='obsddmz0'/> > <model type='virtio'/> > <alias name='net3'/> > <address type='pci' domain='0x0000' bus='0x04' slot='0x00' > function='0x0'/> > </interface> > <interface type='bridge'> > <mac address='00:50:56:73:a4:ff'/> > <source bridge='vpnif'/> > <target dev='obsdvpn0'/> > <model type='virtio'/> > <alias name='net4'/> > <address type='pci' domain='0x0000' bus='0x05' slot='0x00' > function='0x0'/> > </interface> > <interface type='bridge'> > <mac address='00:50:56:29:0d:b5'/> > <source bridge='encif'/> > <target dev='obsdenc0'/> > <model type='virtio'/> > <alias name='net5'/> > <address type='pci' domain='0x0000' bus='0x06' slot='0x00' > function='0x0'/> > </interface> > <interface type='bridge'> > <mac address='00:50:56:d1:ba:cc'/> > <source bridge='idpmif'/> > <target dev='obsdidp0'/> > <model type='virtio'/> > <alias name='net6'/> > <address type='pci' domain='0x0000' bus='0x07' slot='0x00' > function='0x0'/> > </interface> > <interface type='bridge'> > <mac address='00:50:56:49:21:d0'/> > <source bridge='syncif'/> > <target dev='obsdsync0'/> > <model type='virtio'/> > <alias name='net7'/> > <address type='pci' domain='0x0000' bus='0x08' slot='0x00' > function='0x0'/> > </interface> > <interface type='bridge'> > <mac address='00:50:56:a6:72:ff'/> > <source bridge='winif'/> > <target dev='obsdwin0'/> > <model type='virtio'/> > <alias name='net8'/> > <address type='pci' domain='0x0000' bus='0x09' slot='0x00' > function='0x0'/> > </interface> > <serial type='pty'> > <source path='/dev/pts/4'/> > <target type='isa-serial' port='0'> > <model name='isa-serial'/> > </target> > <alias name='serial0'/> > </serial> > <console type='pty' tty='/dev/pts/4'> > <source path='/dev/pts/4'/> > <target type='serial' port='0'/> > <alias name='serial0'/> > </console> > <channel type='spicevmc'> > <target type='virtio' name='com.redhat.spice.0' > state='disconnected'/> > <alias name='channel0'/> > <address type='virtio-serial' controller='0' bus='0' port='1'/> > </channel> > <input type='mouse' bus='ps2'> > <alias name='input0'/> > </input> > <input type='keyboard' bus='ps2'> > <alias name='input1'/> > </input> > <graphics type='vnc' port='5903' autoport='yes' listen='127.0.0.1' > keymap='es'> > <listen type='address' address='127.0.0.1'/> > </graphics> > <video> > <model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1' > primary='yes'/> > <alias name='video0'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x01' > function='0x0'/> > </video> > <memballoon model='virtio'> > <alias name='balloon0'/> > <address type='pci' domain='0x0000' bus='0x0c' slot='0x00' > function='0x0'/> > </memballoon> > <rng model='virtio'> > <backend model='random'>/dev/urandom</backend> > <alias name='rng0'/> > <address type='pci' domain='0x0000' bus='0x0d' slot='0x00' > function='0x0'/> > </rng> > </devices> > <seclabel type='dynamic' model='selinux' relabel='yes'> > <label>system_u:system_r:svirt_t:s0:c82,c777</label> > <imagelabel>system_u:object_r:svirt_image_t:s0:c82,c777</imagelabel> > </seclabel> > <seclabel type='dynamic' model='dac' relabel='yes'> > <label>+107:+107</label> > <imagelabel>+107:+107</imagelabel> > </seclabel> > </domain> > > Dmesg output: > > OpenBSD 6.8 (GENERIC) #97: Sun Oct 4 18:00:46 MDT 2020 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC > real mem = 788389888 (751MB) > avail mem = 749596672 (714MB) > random: good seed from bootblocks > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xf5af0 (9 entries) > bios0: vendor SeaBIOS version "1.11.1-4.module+el8.1.0+4066+0f1aadab" date > 04/01/2014 > bios0: Red Hat KVM > acpi0 at bios0: ACPI 3.0 > acpi0: sleep states S5 > acpi0: tables DSDT FACP APIC MCFG > acpi0: wakeup devices > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel Core Processor (Broadwell), 1900.29 MHz, 06-3d-02 > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,PCLMUL,SSSE3,FMA3,CX16,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,RDTSCP,LONG,LAHF,ABM,3DNOWP,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,ARAT,XSAVEOPT,MELTDOWN > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB > 64b/line 16-way L2 cache > cpu0: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped > cpu0: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 1000MHz > ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 11, 24 pins > acpimcfg0 at acpi0 > acpimcfg0: addr 0xb0000000, bus 0-255 > acpiprt0 at acpi0: bus 0 (PCI0) > "ACPI0006" at acpi0 not configured > acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 > acpicmos0 at acpi0 > "PNP0A06" at acpi0 not configured > "PNP0A06" at acpi0 not configured > "QEMU0002" at acpi0 not configured > "ACPI0010" at acpi0 not configured > acpicpu0 at acpi0: C1(@1 halt!) > cpu0: using Broadwell MDS workaround > pvbus0 at mainbus0: KVM > pvclock0 at pvbus0 > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x00 > vga1 at pci0 dev 1 function 0 "Red Hat QXL Video" rev 0x04 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > ppb0 at pci0 dev 2 function 0 vendor "Red Hat", unknown product 0x000c rev > 0x00: apic 0 int 22 > pci1 at ppb0 bus 1 > virtio0 at pci1 dev 0 function 0 "Qumranet Virtio 1.x Network" rev 0x01 > vio0 at virtio0: address 00:50:56:6f:64:aa > virtio0: msix shared > ppb1 at pci0 dev 2 function 1 vendor "Red Hat", unknown product 0x000c rev > 0x00: apic 0 int 22 > pci2 at ppb1 bus 2 > virtio1 at pci2 dev 0 function 0 "Qumranet Virtio 1.x Network" rev 0x01 > vio1 at virtio1: address 00:50:56:ab:44:05 > virtio1: msix shared > ppb2 at pci0 dev 2 function 2 vendor "Red Hat", unknown product 0x000c rev > 0x00: apic 0 int 22 > pci3 at ppb2 bus 3 > virtio2 at pci3 dev 0 function 0 "Qumranet Virtio 1.x Network" rev 0x01 > vio2 at virtio2: address 00:50:56:3c:e5:61 > virtio2: msix shared > ppb3 at pci0 dev 2 function 3 vendor "Red Hat", unknown product 0x000c rev > 0x00: apic 0 int 22 > pci4 at ppb3 bus 4 > virtio3 at pci4 dev 0 function 0 "Qumranet Virtio 1.x Network" rev 0x01 > vio3 at virtio3: address 00:50:56:4c:d6:34 > virtio3: msix shared > ppb4 at pci0 dev 2 function 4 vendor "Red Hat", unknown product 0x000c rev > 0x00: apic 0 int 22 > pci5 at ppb4 bus 5 > virtio4 at pci5 dev 0 function 0 "Qumranet Virtio 1.x Network" rev 0x01 > vio4 at virtio4: address 00:50:56:73:a4:ff > virtio4: msix shared > ppb5 at pci0 dev 2 function 5 vendor "Red Hat", unknown product 0x000c rev > 0x00: apic 0 int 22 > pci6 at ppb5 bus 6 > virtio5 at pci6 dev 0 function 0 "Qumranet Virtio 1.x Network" rev 0x01 > vio5 at virtio5: address 00:50:56:29:0d:b5 > virtio5: msix shared > ppb6 at pci0 dev 2 function 6 vendor "Red Hat", unknown product 0x000c rev > 0x00: apic 0 int 22 > pci7 at ppb6 bus 7 > virtio6 at pci7 dev 0 function 0 "Qumranet Virtio 1.x Network" rev 0x01 > vio6 at virtio6: address 00:50:56:d1:ba:cc > virtio6: msix shared > ppb7 at pci0 dev 2 function 7 vendor "Red Hat", unknown product 0x000c rev > 0x00: apic 0 int 22 > pci8 at ppb7 bus 8 > virtio7 at pci8 dev 0 function 0 "Qumranet Virtio 1.x Network" rev 0x01 > vio7 at virtio7: address 00:50:56:49:21:d0 > virtio7: msix shared > ppb8 at pci0 dev 3 function 0 vendor "Red Hat", unknown product 0x000c rev > 0x00: apic 0 int 23 > pci9 at ppb8 bus 9 > virtio8 at pci9 dev 0 function 0 "Qumranet Virtio 1.x Network" rev 0x01 > vio8 at virtio8: address 00:50:56:a6:72:ff > virtio8: msix shared > ppb9 at pci0 dev 3 function 1 vendor "Red Hat", unknown product 0x000c rev > 0x00: apic 0 int 23 > pci10 at ppb9 bus 10 > virtio9 at pci10 dev 0 function 0 "Qumranet Virtio 1.x Console" rev 0x01 > virtio9: no matching child driver; not configured > ppb10 at pci0 dev 3 function 2 vendor "Red Hat", unknown product 0x000c > rev 0x00: apic 0 int 23 > pci11 at ppb10 bus 11 > virtio10 at pci11 dev 0 function 0 "Qumranet Virtio 1.x Storage" rev 0x01 > vioblk0 at virtio10 > scsibus1 at vioblk0: 1 targets > sd0 at scsibus1 targ 0 lun 0: <VirtIO, Block Device, > > sd0: 16384MB, 512 bytes/sector, 33554432 sectors > virtio10: msix shared > ppb11 at pci0 dev 3 function 3 vendor "Red Hat", unknown product 0x000c > rev 0x00: apic 0 int 23 > pci12 at ppb11 bus 12 > virtio11 at pci12 dev 0 function 0 vendor "Qumranet", unknown product > 0x1045 rev 0x01 > viomb0 at virtio11 > virtio11: apic 0 int 23 > ppb12 at pci0 dev 3 function 4 vendor "Red Hat", unknown product 0x000c > rev 0x00: apic 0 int 23 > pci13 at ppb12 bus 13 > virtio12 at pci13 dev 0 function 0 "Qumranet Virtio 1.x RNG" rev 0x01 > viornd0 at virtio12 > virtio12: apic 0 int 23 > virtio7: msix shared > ppb8 at pci0 dev 3 function 0 vendor "Red Hat", unknown product 0x000c rev > 0x00: apic 0 int 23 > pci9 at ppb8 bus 9 > virtio8 at pci9 dev 0 function 0 "Qumranet Virtio 1.x Network" rev 0x01 > vio8 at virtio8: address 00:50:56:a6:72:ff > virtio8: msix shared > ppb9 at pci0 dev 3 function 1 vendor "Red Hat", unknown product 0x000c rev > 0x00: apic 0 int 23 > pci10 at ppb9 bus 10 > virtio9 at pci10 dev 0 function 0 "Qumranet Virtio 1.x Console" rev 0x01 > virtio9: no matching child driver; not configured > ppb10 at pci0 dev 3 function 2 vendor "Red Hat", unknown product 0x000c > rev 0x00: apic 0 int 23 > pci11 at ppb10 bus 11 > virtio10 at pci11 dev 0 function 0 "Qumranet Virtio 1.x Storage" rev 0x01 > vioblk0 at virtio10 > scsibus1 at vioblk0: 1 targets > sd0 at scsibus1 targ 0 lun 0: <VirtIO, Block Device, > > sd0: 16384MB, 512 bytes/sector, 33554432 sectors > virtio10: msix shared > ppb11 at pci0 dev 3 function 3 vendor "Red Hat", unknown product 0x000c > rev 0x00: apic 0 int 23 > pci12 at ppb11 bus 12 > virtio11 at pci12 dev 0 function 0 vendor "Qumranet", unknown product > 0x1045 rev 0x01 > viomb0 at virtio11 > virtio11: apic 0 int 23 > ppb12 at pci0 dev 3 function 4 vendor "Red Hat", unknown product 0x000c > rev 0x00: apic 0 int 23 > pci13 at ppb12 bus 13 > virtio12 at pci13 dev 0 function 0 "Qumranet Virtio 1.x RNG" rev 0x01 > viornd0 at virtio12 > virtio12: apic 0 int 23 > pcib0 at pci0 dev 31 function 0 "Intel 82801IB LPC" rev 0x02 > ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x02: msi, AHCI 1.0 > scsibus2 at ahci0: 32 targets > ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 0 > int 16 > iic0 at ichiic0 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > vscsi0 at root > scsibus3 at vscsi0: 256 targets > softraid0 at root > scsibus4 at softraid0: 256 targets > root on sd0a (dcd0d9bbce80825c.a) swap on sd0b dump on sd0b > carp0: state transition: BACKUP -> MASTER > carp1: state transition: BACKUP -> MASTER > carp2: state transition: BACKUP -> MASTER > carp3: state transition: BACKUP -> MASTER > carp4: state transition: BACKUP -> MASTER > carp5: state transition: BACKUP -> MASTER > carp6: state transition: BACKUP -> MASTER > carp7: state transition: BACKUP -> MASTER > pfsync: failed to receive bulk update > > Regards, > C. L. Martinez > >
