I don't think you mentioned the date of the working one, could you include
that please. It would be helpful to include dmesg from both working and
non-working (you may still have them both in /var/log/messages*).
--
Sent from a phone, apologies for poor formatting.
On 11 April 2021 14:33:04 hendri...@gmail.com wrote:
> > Synopsis: re interface is not processing data
> > Category: amd64
> > Environment:
> System : OpenBSD 6.9
> Details : OpenBSD 6.9-beta (GENERIC.MP) #440: Wed Mar 31 11:13:57
MDT 2021
>
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
>
> Architecture: OpenBSD.amd64
> Machine : amd64
> > Description:
> The interface is up, but no data is seen on tcpdump.
>
> hendrikm@hpl:~$ ifconfig re0
> re0: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu 1500
> lladdr b4:b5:2f:8b:c7:96
> index 1 priority 0 llprio 3
> media: Ethernet autoselect (1000baseT full-duplex,rxpause,txpause)
> status: active
>
> hendrikm@hpl:~$ doas tcpdump -i re0 -nnnvvv
> tcpdump: listening on re0, link-type EN10MB
> 15:23:16.134778 0.0.0.0.68 > 255.255.255.255.67: xid:0x198b6516
> [|bootp] [tos 0x10] (ttl 128, id 0, len 328)
> ^C
> 1 packets received by filter
> 0 packets dropped by kernel
>
> It is similar when configuring a static ip.
> hendrikm@hpl:~$ ifconfig re0
> re0: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu 1500
> lladdr b4:b5:2f:8b:c7:96
> index 1 priority 0 llprio 3
> media: Ethernet autoselect (1000baseT full-duplex,rxpause,txpause)
> status: active
> inet 192.168.101.200 netmask 0xffffff00 broadcast 192.168.101.255
>
> hendrikm@hpl:~$ doas tcpdump -i re0 -nnnvvv
> tcpdump: listening on re0, link-type EN10MB
> 15:25:25.658162 0.0.0.0.68 > 255.255.255.255.67: xid:0xc87c5454
> [|bootp] [tos 0x10] (ttl 128, id 0, len 328)
> ^C
> 1 packets received by filter
> 0 packets dropped by kernel
>
> systat vm doesn't show any interupts being processed for re0
>
> 2 users Load 0.46 0.63 0.55 hpl
15:31:25
>
> memory totals (in KB) PAGING SWAPPING Interrupts
> real virtual free in out in out 309 total
> Active 139148 139148 5540480 ops 100 clock
> All 2452044 2452044 14051900 pages 2 ipi
> 1 acpi0
> Proc:r d s w Csw Trp Sys Int Sof Flt forks
> inteldrm
> 106 462 189 207 36 2 fkppw 11 xhci0
> fksvm ehci0
> 0.6%Int 0.1%Spn 0.9%Sys 0.1%Usr 98.2%Idle pwait
azalia0
> | | | | | | | | | | | relck 190 ral0
> = rlkok re0
> noram ehci1
> Namei Sys-cache Proc-cache No-cache ndcpy 5 ahci0
> Calls hits % hits % miss % fltcp pckbc0
> 2 2 100 zfod pckbc0
> cow
> Disks sd0 cd0 66604 fmin
> seeks 88805 ftarg
> xfers 18 itarg
> speed 589K 7735 wired
> sec 0.0 pdfre
> pdscn
> pzidl 420 IPKTS
> 14 kmape 198 OPKTS
>
> > How-To-Repeat:
> This seems to have broken in a Feb snapshot
> > Fix:
> I haven't been able to identify how to fix it. I thought it might have
> been because of a change in sys/dev/pci/if_re_pci.c, but reverting it
> didn't solve the issue by building a custom kernel. I rollback to this
> snapshot.
>
>
> dmesg:
> OpenBSD 6.9-beta (GENERIC.MP) #440: Wed Mar 31 11:13:57 MDT 2021
> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 8447262720 (8055MB)
> avail mem = 8175857664 (7797MB)
> random: good seed from bootblocks
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xb9b50000 (32 entries)
> bios0: vendor Hewlett-Packard version "68IRR Ver. F.43" date 10/07/2013
> bios0: Hewlett-Packard HP ProBook 4540s
> acpi0 at bios0: ACPI 5.0
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP HPET APIC MCFG ASF! SSDT SSDT SLIC MSDM FPDT
> BGRT SSDT SSDT
> acpi0: wakeup devices LANC(S5) EHC1(S3) EHC2(S3) XHC_(S3) PCIB(S5)
> ECF0(S4) RP03(S4) RP04(S5) WNIC(S5) RP06(S5) NIC_(S5)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.52 MHz, 06-3a-09
> cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.11 MHz, 06-3a-09
> cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 1, core 0, package 0
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.12 MHz, 06-3a-09
> cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 1, package 0
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.11 MHz, 06-3a-09
> cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 1, core 1, package 0
> ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xe0000000, bus 0-255
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (PEGP)
> acpiprt2 at acpi0: bus -1 (PCIB)
> acpiprt3 at acpi0: bus 1 (RP01)
> acpiprt4 at acpi0: bus 2 (RP03)
> acpiprt5 at acpi0: bus 3 (RP04)
> acpiprt6 at acpi0: bus 4 (RP06)
> acpiec0 at acpi0
> "HPQ6001" at acpi0 not configured
> acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
> acpicmos0 at acpi0
> "PNP0A06" at acpi0 not configured
> "SYN0197" at acpi0 not configured
> "HPQ6000" at acpi0 not configured
> acpibat0 at acpi0: BAT0 model "Primary" serial 00557 2017/06/12 type
> LIon oem "Hewlett-Packard"
> acpiac0 at acpi0: AC unit online
> acpibtn0 at acpi0: SLPB
> acpibtn1 at acpi0: LID_
> "PNP0C14" at acpi0 not configured
> acpicpu0 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
> acpicpu2 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
> acpicpu3 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
> acpipwrres0 at acpi0: APPR, resource for HDEF
> acpipwrres1 at acpi0: COMP, resource for COM1
> acpipwrres2 at acpi0: LPP_, resource for LPT0
> acpitz0 at acpi0: critical temperature is 128 degC
> acpitz1 at acpi0: critical temperature is 128 degC
> acpitz2 at acpi0: critical temperature is 128 degC
> acpitz3 at acpi0: critical temperature is 128 degC
> acpitz4 at acpi0: critical temperature is 128 degC
> acpitz5 at acpi0: critical temperature is 128 degC
> acpitz6 at acpi0: critical temperature is 128 degC
> acpitz7 at acpi0: critical temperature is 128 degC
> acpivideo0 at acpi0: GFX0
> acpivout0 at acpivideo0: DD02
> cpu0: using VERW MDS workaround (except on vmm entry)
> cpu0: Enhanced SpeedStep 2594 MHz: speeds: 2601, 2600, 2500, 2400, 2300,
> 2200, 2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
> drm0 at inteldrm0
> inteldrm0: msi, IVYBRIDGE, gen 7
> xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi, xHCI 1.0
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> 3.00/1.00 addr 1
> "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 16
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
> azalia0: codecs: IDT/0x76d9, Intel/0x2806, using IDT/0x76d9
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
> pci1 at ppb0 bus 1
> ppb1 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi
> pci2 at ppb1 bus 2
> "JMicron SD/MMC" rev 0x30 at pci2 dev 0 function 0 not configured
> sdhc0 at pci2 dev 0 function 2 "JMicron SD Host Controller" rev 0x30:
> apic 0 int 18
> sdhc0: SDHC 2.0, 50 MHz base clock
> sdmmc0 at sdhc0: 4-bit
> "JMicron Memory Stick" rev 0x30 at pci2 dev 0 function 3 not configured
> ppb2 at pci0 dev 28 function 3 "Intel 7 Series PCIE" rev 0xc4: msi
> pci3 at ppb2 bus 3
> ral0 at pci3 dev 0 function 0 "Ralink RT3290" rev 0x00: apic 0 int 19,
> address b8:76:3f:28:a2:e3
> ral0: MAC/BBP RT3290 (rev 0x0015), RF RT3290 (MIMO 1T1R)
> "Ralink Bluetooth" rev 0x00 at pci3 dev 0 function 1 not configured
> ppb3 at pci0 dev 28 function 5 "Intel 7 Series PCIE" rev 0xc4: msi
> pci4 at ppb3 bus 4
> re0 at pci4 dev 0 function 0 "Realtek 8168" rev 0x07: RTL8168E/8111E-VL
> (0x2c80), msi, address b4:b5:2f:8b:c7:96
> rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
> ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 16
> usb2 at ehci1: USB revision 2.0
> uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> pcib0 at pci0 dev 31 function 0 "Intel HM76 LPC" rev 0x04
> ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3
> ahci0: port 0: 6.0Gb/s
> ahci0: port 1: 1.5Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD5000LPLX-6, 05.0>
> naa.50014ee65e59b745
> sd0: 476940MB, 512 bytes/sector, 976773168 sectors
> cd0 at scsibus1 targ 1 lun 0: <hp, DVD-RAM UJ8D1, H.01> removable
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> pms0: Synaptics touchpad, firmware 7.5, 0x1e0b1 0x640000 0x147508
> 0xf00473 0xa2400
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> uhidev0 at uhub0 port 4 configuration 1 interface 0 "KYE SYSTEMS CORP.
> Wired Mouse" rev 1.10/24.58 addr 2
> uhidev0: iclass 3/1
> ums0 at uhidev0: 3 buttons, Z dir
> wsmouse1 at ums0 mux 0
> uhidev1 at uhub0 port 4 configuration 1 interface 1 "KYE SYSTEMS CORP.
> Wired Mouse" rev 1.10/24.58 addr 2
> uhidev1: no input interrupt endpoint
> uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
> Hub" rev 2.00/0.00 addr 2
> uhub3: device problem, disabling port 1
> uhidev2 at uhub3 port 2 configuration 1 interface 0 " USB Keyboard" rev
> 1.10/4.03 addr 3
> uhidev2: iclass 3/1
> ukbd0 at uhidev2: 8 variable keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> uhidev3 at uhub3 port 2 configuration 1 interface 1 " USB Keyboard" rev
> 1.10/4.03 addr 3
> uhidev3: iclass 3/0, 2 report ids
> uhid0 at uhidev3 reportid 1: input=1, output=0, feature=0
> uhid1 at uhidev3 reportid 2: input=3, output=0, feature=0
> uvideo0 at uhub3 port 3 configuration 1 interface 0 "Chicony Electronics
> Co., Ltd. HP HD Webcam [Fixed]" rev 2.00/51.70 addr 4
> video0 at uvideo0
> uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching
> Hub" rev 2.00/0.00 addr 2
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root on sd0a (ae81f1d853f62576.a) swap on sd0b dump on sd0b
> inteldrm0: 1366x768, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
> wskbd1: connecting to wsdisplay0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
>
> usbdevs:
> Controller /dev/usb0:
> addr 01: 8086:0000 Intel, xHCI root hub
> super speed, self powered, config 1, rev 1.00
> driver: uhub0
> addr 02: 0458:0186 KYE SYSTEMS CORP., Wired Mouse
> low speed, power 100 mA, config 1, rev 24.58
> driver: uhidev0
> driver: uhidev1
> Controller /dev/usb1:
> addr 01: 8086:0000 Intel, EHCI root hub
> high speed, self powered, config 1, rev 1.00
> driver: uhub1
> addr 02: 8087:0024 Intel, Rate Matching Hub
> high speed, self powered, config 1, rev 0.00
> driver: uhub3
> addr 03: 04d9:1503 , USB Keyboard
> low speed, power 100 mA, config 1, rev 4.03
> driver: uhidev2
> driver: uhidev3
> addr 04: 04f2:b370 Chicony Electronics Co., Ltd., HP HD Webcam [Fixed]
> high speed, power 500 mA, config 1, rev 51.70, iSerial SN0001
> driver: uvideo0
> Controller /dev/usb2:
> addr 01: 8086:0000 Intel, EHCI root hub
> high speed, self powered, config 1, rev 1.00
> driver: uhub2
> addr 02: 8087:0024 Intel, Rate Matching Hub
> high speed, self powered, config 1, rev 0.00
> driver: uhub4
