On 2021-08-08, Andrew Laramore <blind_gh...@tutanota.com> wrote: >>Synopsis: PCI-E NIC won't load on RockPro64 >>Category: arm >>Environment: > System : OpenBSD 6.9 > Details : OpenBSD 6.9 (GENERIC.MP) #0: Thu May 20 02:29:27 MDT 2021 > r...@syspatch-69-arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/GENERIC.MP > > Architecture: OpenBSD.arm64 > Machine : arm64 >>Description: I attached a PCI-E 4-port NIC to the PCI-E slot on the >>RockPro64. OpenBSD boots with the card attached, but doesn't enable the card. >>I can't find any particular errors explaining why the card is not enabled. No >>lights turn on in the NIC during port nor when attaching an ethernet cable. >>Thought perhaps the PCI-E slot was to blame but I have another single-port >>NIC running just fine in the same slot. >>How-To-Repeat: Connect PCI-E NIC to RockPro64 PCI-E slot and boot. Nothing is >>added to ifconfig and the card only shows on pcidump as disabled. Model >>number SI-PEX24042 running RTL8111 Chipset.
Do you have a way to try the card with OpenBSD on another architecture (e.g. amd64)? -- Please keep replies on the mailing list.