On 15/02/22 09:26 Claudio Jeker wrote: > On Tue, Feb 15, 2022 at 02:28:15AM +0100, Tilo Stritzky wrote: > > On 15/02/22 01:54 Tilo Stritzky wrote: > > > > > > I've got another one with a homebuild from -current as of 2022-02-13, > > > will put traces in another mail. > > > > And here we go. > > This is from the crash dump, I lost the console log on this one. > > Dump is still here. > > > > Did you suspend with these disks attached?
To be honest I'm not sure about this particular event, I might have forgotten one. But I am positive I've seen a fault like this without any USB disks attached, not before or during the zzz. > > sd2 at scsibus5 targ 1 lun 0: <WD, Elements 25A2, 1019> > > serial.105825a2373946394343 > > sd2: 1907697MB, 512 bytes/sector, 3906963456 sectors > > softraid0: sd3 was not shutdown properly > > softraid0: sd3 was not shutdown properly > > sd3 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> > > sd3: 1907694MB, 512 bytes/sector, 3906959213 sectors > > umass2 at uhub6 port 3 configuration 1 interface 0 "Genesys Logic USB > > Storage" rev 2.00/0.41 addr 6 > > umass2: using SCSI over Bulk-Only > > scsibus6 at umass2: 2 targets, initiator 0 > > sd4 at scsibus6 targ 1 lun 0: <Maxtor 6, Y120P0, 0041> > > serial.05e30718000000000033 > > sd4: 117246MB, 512 bytes/sector, 240121728 sectors > > softraid0: sd3 was not shutdown properly > > softraid0: sd3 was not shutdown properly > > softraid0: incorrect key or passphrase > > softraid0: sd3 was not shutdown properly > > softraid0: sd3 was not shutdown properly > > sd5 at scsibus4 targ 2 lun 0: <OPENBSD, SR CRYPTO, 006> > > sd5: 116212MB, 512 bytes/sector, 238002895 sectors > > softraid0: volume sd5 is roaming, it used to be sd3, updating metadata > > softraid0: roaming device sd2d -> sd4d > > I wonder if the forced unmount of umass triggers a bug in the softraid > code. Honestly don't suspend / hibernate a system with detachable disks > and expect it to be nice to those disks. I don't. I fully understand that USB devices get knocked off by a suspend/ hibernate. > > $ dmesg -M bsd.0.core -N bsd.0 > > OpenBSD 7.0-current (GENERIC.MP) #0: Sun Feb 13 14:46:40 CET 2022 > > t...@server.my.domain:/usr/src/src/sys/arch/amd64/compile/GENERIC.MP > > real mem = 2112094208 (2014MB) > > avail mem = 2030948352 (1936MB) > > random: good seed from bootblocks > > mpath0 at root > > scsibus0 at mpath0: 256 targets > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x7ee42040 (9 entries) > > bios0: vendor coreboot version "v4.12.0.5" date 09/25/2020 > > bios0: PC Engines apu1 > > acpi0 at bios0: ACPI 6.0 > > acpi0: sleep states S0 S1 S3 S4 S5 > > acpi0: tables DSDT FACP SSDT TPM2 APIC HEST SSDT SSDT HPET > > acpi0: wakeup devices AGPB(S4) HDMI(S4) PBR4(S4) PBR5(S4) PBR6(S4) PBR7(S4) > > PE20(S4) PE21(S4) PE22(S4) PE23(S4) PIBR(S4) UOH1(S3) UOH2(S3) UOH3(S3) > > UOH4(S3) UOH5(S3) [...] > > acpitimer0 at acpi0: 3579545 Hz, 32 bits > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: AMD G-T40E Processor, 1000.15 MHz, 14-02-00 > > cpu0: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC > > cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB > > 64b/line 16-way L2 cache > > cpu0: 8 4MB entries fully associative > > cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative > > cpu0: smt 0, core 0, package 0 > > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > > cpu0: apic clock running at 199MHz > > cpu0: mwait min=64, max=64, IBE > > cpu1 at mainbus0: apid 1 (application processor) > > cpu1: AMD G-T40E Processor, 1000.01 MHz, 14-02-00 > > cpu1: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC > > cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB > > 64b/line 16-way L2 cache > > cpu1: 8 4MB entries fully associative > > cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative > > cpu1: smt 0, core 1, package 0 > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins > > acpihpet0 at acpi0: 14318180 Hz > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus -1 (AGPB) > > acpiprt2 at acpi0: bus -1 (HDMI) > > acpiprt3 at acpi0: bus 1 (PBR4) > > acpiprt4 at acpi0: bus 2 (PBR5) > > acpiprt5 at acpi0: bus 3 (PBR6) > > acpiprt6 at acpi0: bus -1 (PBR7) > > acpiprt7 at acpi0: bus 5 (PE20) > > acpiprt8 at acpi0: bus -1 (PE21) > > acpiprt9 at acpi0: bus -1 (PE22) > > acpiprt10 at acpi0: bus -1 (PE23) > > acpiprt11 at acpi0: bus 4 (PIBR) > > acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 > > "PRP0001" at acpi0 not configured > > "PRP0001" at acpi0 not configured > > "PRP0001" at acpi0 not configured > > "PRP0001" at acpi0 not configured > > "PRP0001" at acpi0 not configured > > "PRP0001" at acpi0 not configured > > "PRP0001" at acpi0 not configured > > acpicmos0 at acpi0 > > "BOOT0000" at acpi0 not configured > > acpicpu0 at acpi0: C2(0@100 io@0x841), C1(@1 halt!), PSS > > acpicpu1 at acpi0: C2(0@100 io@0x841), C1(@1 halt!), PSS > > acpitz0 at acpi0: critical temperature is 110 degC > > cpu0: 1000 MHz: speeds: 1000 800 MHz > > pci0 at mainbus0 bus 0 > > pchb0 at pci0 dev 0 function 0 "AMD 14h Host" rev 0x00 > > ppb0 at pci0 dev 4 function 0 "AMD 14h PCIE" rev 0x00: msi > > pci1 at ppb0 bus 1 > > re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E > > (0x2c00), msi, address 00:0d:b9:3e:8f:a4 > > rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 4 > > ppb1 at pci0 dev 5 function 0 "AMD 14h PCIE" rev 0x00: msi > > pci2 at ppb1 bus 2 > > re1 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E > > (0x2c00), msi, address 00:0d:b9:3e:8f:a5 > > rgephy1 at re1 phy 7: RTL8169S/8110S/8211 PHY, rev. 4 > > ppb2 at pci0 dev 6 function 0 "AMD 14h PCIE" rev 0x00: msi > > pci3 at ppb2 bus 3 > > re2 at pci3 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E > > (0x2c00), msi, address 00:0d:b9:3e:8f:a6 > > rgephy2 at re2 phy 7: RTL8169S/8110S/8211 PHY, rev. 4 > > ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: apic 2 int 19, > > GHC 0x80000000<AE> AHCI 1.2 > > ahci0: capabilities > > 0xf322ff05<S64A,NCQ,SSNTF,SMPS,SAL,SCLO,SPM,PMD,SSC,PSC>, 6 ports, 32 cmds, > > gen 2 (3.0Gb/s) > > ahci0: extended capabilities 0x0 > > ahci0: ports implemented: 0x0000003f > > ahci0.0: port reset > > ahci0.1: port reset > > ahci0.2: port reset > > ahci0.3: port reset > > ahci0.4: port reset > > ahci0.5: port reset > > ahci0: no device detected on port 0 > > ahci0.1: PMP probe 2 > > ahci0.1: sending PMP reset cmd > > ahci0.1: sending PMP probe status cmd > > ahci0.1: ccb in slot 1 errored > > ahci0.1: PMP probe cmd timed out > > ahci0.1: timed out 1, active 0, active_cnt 0 > > ahci0.1: PMP probe status cmd failed > > ahci0.1: PMP probe 1 > > ahci0.1: sending PMP reset cmd > > ahci0.1: sending PMP probe status cmd > > ahci0.1: ccb in slot 1 errored > > ahci0.1: PMP probe cmd timed out > > ahci0.1: timed out 1, active 0, active_cnt 0 > > ahci0.1: PMP probe status cmd failed > > ahci0.1: no PMP found, resetting the port > > ahci0: detected device on port 1; 0 > > ahci0.1: port 1: 3.0Gb/s > > ahci0: no device detected on port 2 > > ahci0: no device detected on port 3 > > ahci0: no device detected on port 4 > > ahci0: no device detected on port 5 > > scsibus1 at ahci0: 32 targets > > sd0 at scsibus1 targ 1 lun 0: <ATA, ST9160310AS, 0303> naa.5000c50011b8b2fa > > sd0: 152627MB, 512 bytes/sector, 312581808 sectors > > ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18, > > version 1.0, legacy support > > ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17 > > usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00 > > addr 1 > > ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18, > > version 1.0, legacy support > > ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17 > > usb1 at ehci1: USB revision 2.0 > > uhub1 at usb1 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00 > > addr 1 > > piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: SMI > > iic0 at piixpm0 > > pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40 > > ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40 > > pci4 at ppb3 bus 4 > > ppb4 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00 > > pci5 at ppb4 bus 5 > > ral0 at pci5 dev 0 function 0 "Ralink RT2790" rev 0x00: apic 2 int 16, > > address 00:22:43:5d:d4:53 > > ral0: MAC/BBP RT2872 (rev 0x0200), RF RT2720 (MIMO 1T2R) > > ohci2 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18, > > version 1.0, legacy support > > ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17 > > usb2 at ehci2: USB revision 2.0 > > uhub2 at usb2 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00 > > addr 1 > > pchb1 at pci0 dev 24 function 0 "AMD 14h Link Cfg" rev 0x43 > > pchb2 at pci0 dev 24 function 1 "AMD 14h Address Map" rev 0x00 > > pchb3 at pci0 dev 24 function 2 "AMD 14h DRAM Cfg" rev 0x00 > > km0 at pci0 dev 24 function 3 "AMD 14h Misc Cfg" rev 0x00 > > pchb4 at pci0 dev 24 function 4 "AMD 14h CPU Power" rev 0x00 > > pchb5 at pci0 dev 24 function 5 "AMD 14h Reserved" rev 0x00 > > pchb6 at pci0 dev 24 function 6 "AMD 14h NB Power" rev 0x00 > > pchb7 at pci0 dev 24 function 7 "AMD 14h Reserved" rev 0x00 > > usb3 at ohci0: USB revision 1.0 > > uhub3 at usb3 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 > > addr 1 > > usb4 at ohci1: USB revision 1.0 > > uhub4 at usb4 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 > > addr 1 > > isa0 at pcib0 > > isadma0 at isa0 > > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > > com0: console > > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > > com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > lpt0 at isa0 port 0x378/4 irq 7 > > wbsio0 at isa0 port 0x2e/2: NCT5104D rev 0x52 > > usb5 at ohci2: USB revision 1.0 > > uhub5 at usb5 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 > > addr 1 > > vmm0 at mainbus0: SVM/RVI > > uvideo0 at uhub0 port 1 configuration 1 interface 0 "Trust Webcam Trust > > Webcam" rev 2.00/0.00 addr 2 > > video0 at uvideo0 > > uaudio0 at uhub0 port 1 configuration 1 interface 3 "Trust Webcam Trust > > Webcam" rev 2.00/0.00 addr 2 > > uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls > > audio0 at uaudio0 > > uhub6 at uhub0 port 5 configuration 1 interface 0 "Genesys Logic USB2.0 > > Hub" rev 2.00/77.64 addr 3 > > umsm0 at uhub6 port 2 configuration 1 interface 0 "HUAWEI Technology HUAWEI > > Mobile" rev 2.00/0.00 addr 4 > > ucom0 at umsm0 > > umsm1 at uhub6 port 2 configuration 1 interface 1 "HUAWEI Technology HUAWEI > > Mobile" rev 2.00/0.00 addr 4 > > ucom1 at umsm1 > > umsm2 at uhub6 port 2 configuration 1 interface 2 "HUAWEI Technology HUAWEI > > Mobile" rev 2.00/0.00 addr 4 > > ucom2 at umsm2 > > umass0 at uhub2 port 1 configuration 1 interface 0 "Generic Flash Card > > Reader/Writer" rev 2.01/1.00 addr 2 > > umass0: using SCSI over Bulk-Only > > scsibus2 at umass0: 2 targets, initiator 0 > > sd1 at scsibus2 targ 1 lun 0: <Multiple, Card Reader, 1.00> removable > > serial.058f6366058F63666485 > > vscsi0 at root > > scsibus3 at vscsi0: 256 targets > > softraid0 at root > > scsibus4 at softraid0: 256 targets > > root on sd0a (5e1251d77858496b.a) swap on sd0b dump on sd0b > > umass1 at uhub6 port 3 configuration 1 interface 0 "Western Digital > > Elements 1042" rev 2.10/10.19 addr 5 > > umass1: using SCSI over Bulk-Only > > scsibus5 at umass1: 2 targets, initiator 0 > > sd2 at scsibus5 targ 1 lun 0: <WD, Elements 1042, 1019> > > serial.10581042325937333236 > > sd2: 476938MB, 512 bytes/sector, 976769024 sectors > > sd2 detached > > scsibus5 detached > > umass1 detached > > umass1 at uhub6 port 4 configuration 1 interface 0 "Western Digital > > Elements 25A2" rev 2.10/10.19 addr 5 > > umass1: using SCSI over Bulk-Only > > scsibus5 at umass1: 2 targets, initiator 0 > > sd2 at scsibus5 targ 1 lun 0: <WD, Elements 25A2, 1019> > > serial.105825a2373946394343 > > sd2: 1907697MB, 512 bytes/sector, 3906963456 sectors > > softraid0: sd3 was not shutdown properly > > softraid0: sd3 was not shutdown properly > > sd3 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> > > sd3: 1907694MB, 512 bytes/sector, 3906959213 sectors > > umass2 at uhub6 port 3 configuration 1 interface 0 "Genesys Logic USB > > Storage" rev 2.00/0.41 addr 6 > > umass2: using SCSI over Bulk-Only > > scsibus6 at umass2: 2 targets, initiator 0 > > sd4 at scsibus6 targ 1 lun 0: <Maxtor 6, Y120P0, 0041> > > serial.05e30718000000000033 > > sd4: 117246MB, 512 bytes/sector, 240121728 sectors > > softraid0: sd3 was not shutdown properly > > softraid0: sd3 was not shutdown properly > > softraid0: incorrect key or passphrase > > softraid0: sd3 was not shutdown properly > > softraid0: sd3 was not shutdown properly > > sd5 at scsibus4 targ 2 lun 0: <OPENBSD, SR CRYPTO, 006> > > sd5: 116212MB, 512 bytes/sector, 238002895 sectors > > softraid0: volume sd5 is roaming, it used to be sd3, updating metadata > > softraid0: roaming device sd2d -> sd4d > > uid 1000 on /var: file system full > > sd5 detached > > sd4 detached > > scsibus6 detached > > umass2 detached > > umass2 at uhub6 port 3 configuration 1 interface 0 "Genesys Logic USB > > Storage" rev 2.00/0.41 addr 6 > > umass2: using SCSI over Bulk-Only > > scsibus6 at umass2: 2 targets, initiator 0 > > sd4 at scsibus6 targ 1 lun 0: <WDC WD15, EADS-00S2B0, 0041> > > serial.05e30718000000000033 > > sd4: 1430799MB, 512 bytes/sector, 2930277168 sectors > > sd4 detached > > scsibus6 detached > > umass2 detached > > umass2 at uhub6 port 3 configuration 1 interface 0 "Genesys Logic USB > > Storage" rev 2.00/0.41 addr 6 > > umass2: using SCSI over Bulk-Only > > scsibus6 at umass2: 2 targets, initiator 0 > > sd4 at scsibus6 targ 1 lun 0: <HGST HTS, 545032A7E680, 0041> > > serial.05e30718000000000033 > > sd4: 305245MB, 512 bytes/sector, 625142448 sectors > > sd4 detached > > scsibus6 detached > > umass2 detached > > com0: 2 silo overflows, 0 ibuf overflows > > com0: 6 silo overflows, 0 ibuf overflows > > com0: 13 silo overflows, 0 ibuf overflows > > com0: 14 silo overflows, 0 ibuf overflows > > com0: 6 silo overflows, 0 ibuf overflows > > com0: 38 silo overflows, 0 ibuf overflows > > sd3 detached > > uhub3 detached > > video0 detached > > uvideo0 detached > > audio0 detached > > uaudio0 detached > > ucom0 detached > > umsm0 detached > > ucom1 detached > > umsm1 detached > > ucom2 detached > > umsm2 detached > > sd2 detached > > scsibus5 detached > > umass1 detached > > uhub6 detached > > uhub0 detached > > uhub4 detached > > uhub1 detached > > uhub5 detached > > uvm_fault(0xffffffff82389c58, 0x0, 0, 1) -> e > > kernel: page fault trap, code=0 > > Stopped at bufq_destroy+0x83: movq 0(%rcx),%rcx > > TID PID UID PRFLAGS PFLAGS CPU COMMAND > > 396043 97889 77 0x100012 0 1 dhcpleased > > *383055 34320 0 0x14000 0x200 0K usbtask > > bufq_destroy(ffff800000a73d10) at bufq_destroy+0x83 > > sddetach(ffff800000a73c00,1) at sddetach+0x42 > > config_detach(ffff800000a73c00,1) at config_detach+0x142 > > scsi_detach_link(ffff8000007c6d00,1) at scsi_detach_link+0x4d > > scsibusdetach(ffff800000a86580,1) at scsibusdetach+0x54 > > config_detach(ffff800000a86580,1) at config_detach+0x142 > > umass_scsi_detach(ffff800000a73a00,1) at umass_scsi_detach+0x35 > > umass_detach(ffff800000a73a00,1) at umass_detach+0xd4 > > config_detach(ffff800000a73a00,1) at config_detach+0x142 > > usbd_detach(ffff8000007c6c00,ffff800000761a00) at usbd_detach+0x5a > > uhub_detach(ffff800000761a00,1) at uhub_detach+0x85 > > config_detach(ffff800000761a00,1) at config_detach+0x142 > > usbd_detach(ffff800000749300,ffff800000749200) at usbd_detach+0x5a > > usb_explore(ffff800000749200) at usb_explore+0x144 > > end trace frame: 0xffff800020fcdb30, count: 0 > > https://www.openbsd.org/ddb.html describes the minimum info required in bug > > reports. Insufficient info makes it difficult to find and fix bugs. > > ddb{0}> No such command > > ddb{0}> > > -- > :wq Claudio >
