I accidentally updated a router to -current instead of 7.1 and hit this.
(Thanks sysupgrade - it was running a 7.0-stable kernel before...)
Unfortunately it runs with ddb.panic=0 and this time it hanged, I won't
have time to figure anything out with it when I get it back online, but
might be able to do so later in the week.
Thought I'd send it out now as a heads-up as much as anything (and maybe
someone has an idea). Boot messages below.
------
starting network daemons: sshd snmpd ospfd ospf6d
relayduvm_fault(0xfffffd811afd2de0, 0x0, 0, 1) -> e
fatal page fault in supervisor mode
trap type 6 code 0 rip ffffffff810a55fc cs 8 rflags 10282 cr2 0 cpl 0 rsp
ffff8000267e8570
gsbase 0xffff800022408ff0 kgsbase 0x0
panic: trap type 6, code=0, pc=ffffffff810a55fc
Starting spuavnimc_:f au lt (0 x f f f ff d8 1 1 a f d 2d e 0 , 0 x 1
8, 0 , 1 ) -> e
kfeartanell padigeag fnaosutltic ina ssseupretirovins "o!rT mAIoLdeQ_
EMtrPTapY (tpgypl)e " 6f caoildeed 0: rfiilpe f f"/ffusfrf/fsf8r1c/5s2aybs/6u4
vmc/s
8u rvfm_lapmgsem r1a0n24g6e .cc"r,2 l18in ecp l62 8a
rsPpar faflflfe8l0 t0r0a2c67eeb7a9c3k,0
sugpspbraesess 0exd.ff.f.f
800022408ff0 kgsbase 0x0
panic: trap type 6, code=0, pc=ffffffff8152ab64
Faulted in traceback, aborting...
uvm_fault(0xfffffd811afd2ef0, 0x47, 0, 2) -> e
fatal page fault in supervisor mode
trap type 6 code 2 rip ffffffff8104ed7b cs 8 rflags 10286 cr2 47 cpl a rsp
ffff8000267ef300
gsbase 0xffff80002241aff0 kgsbase 0x0
panic: trap type 6, code=2, pc=ffffffff8104ed7b
Parallel traceback, suppressed...
------
[ using 3304416 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2022 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.1-current (GENERIC.MP) #563: Mon May 30 19:14:52 MDT 2022
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4268331008 (4070MB)
avail mem = 4121600000 (3930MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xbf79c000 (63 entries)
bios0: vendor Dell Inc. version "1.3.4" date 05/24/2010
bios0: Dell Inc. PowerEdge R210
acpi0 at bios0: ACPI 3.0
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC SPCR HPET DM__ MCFG WD__ SLIC ERST HEST BERT EINJ
TCPA SSDT
acpi0: wakeup devices PCI0(S5) USBA(S0) USBB(S0)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU X3430 @ 2.40GHz, 2394.37 MHz, 06-1e-05
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 132MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU X3430 @ 2.40GHz, 2394.00 MHz, 06-1e-05
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU X3430 @ 2.40GHz, 2394.00 MHz, 06-1e-05
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU X3430 @ 2.40GHz, 2394.00 MHz, 06-1e-05
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (LYD0)
acpiprt2 at acpi0: bus -1 (LYD2)
acpiprt3 at acpi0: bus -1 (HVD0)
acpiprt4 at acpi0: bus -1 (HVD2)
acpiprt5 at acpi0: bus 2 (PEX0)
acpiprt6 at acpi0: bus -1 (PEX4)
acpiprt7 at acpi0: bus -1 (PEX5)
acpiprt8 at acpi0: bus 3 (COMP)
acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
acpicmos0 at acpi0
com0 at acpi0 COMA addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at acpi0 COMB addr 0x2f8/0x8 irq 3: ns16550a, 16 byte fifo
acpicpu0 at acpi0: !C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
acpicpu1 at acpi0: !C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
acpicpu2 at acpi0: !C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
acpicpu3 at acpi0: !C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca8/8 spacing 4
cpu0: using IvyBridge MDS workaround
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core DMI" rev 0x11
ppb0 at pci0 dev 3 function 0 "Intel Core PCIE" rev 0x11: msi
pci1 at ppb0 bus 1
ix0 at pci1 dev 0 function 0 "Intel 82599" rev 0x01, msix, 4 queues, address
00:1b:21:9b:68:10
ix1 at pci1 dev 0 function 1 "Intel 82599" rev 0x01, msix, 4 queues, address
00:1b:21:9b:68:11
"Intel Core Management" rev 0x11 at pci0 dev 8 function 0 not configured
"Intel Core Scratch" rev 0x11 at pci0 dev 8 function 1 not configured
"Intel Core Control" rev 0x11 at pci0 dev 8 function 2 not configured
"Intel Core Misc" rev 0x11 at pci0 dev 8 function 3 not configured
"Intel Core QPI Link" rev 0x11 at pci0 dev 16 function 0 not configured
"Intel Core QPI Routing" rev 0x11 at pci0 dev 16 function 1 not configured
ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x05: apic 0 int 22
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb1 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x05
pci2 at ppb1 bus 2
bnx0 at pci2 dev 0 function 0 "Broadcom BCM5716" rev 0x20: apic 0 int 16
bnx1 at pci2 dev 0 function 1 "Broadcom BCM5716" rev 0x20: apic 0 int 17
ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x05: apic 0 int 22
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa5
pci3 at ppb2 bus 3
vga1 at pci3 dev 3 function 0 "Matrox MGA G200eW" rev 0x0a
wsdisplay at vga1 not configured
pcib0 at pci0 dev 31 function 0 "Intel 3420 LPC" rev 0x05
ahci0 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x05: msi, AHCI 1.3
ahci0: port 0: 3.0Gb/s
ahci0: port 3: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, INTEL SSDSC2CT06, 300i> naa.5001517803d0c1a6
sd0: 57241MB, 512 bytes/sector, 117231408 sectors, thin
cd0 at scsibus1 targ 3 lun 0: <TEAC, DVD-ROM DV-28SW, R.2A> removable
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Avocent USB Composite
Device-0" rev 1.10/0.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0 mux 1
uhidev1 at uhub2 port 1 configuration 1 interface 1 "Avocent USB Composite
Device-0" rev 1.10/0.00 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
uhub4 at uhub3 port 5 configuration 1 interface 0 "Standard Microsystems
product 0x2514" rev 2.00/0.00 addr 3
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (f2fa78dad869b608.a) swap on sd0b dump on sd0b
bnx0: address b8:ac:6f:85:73:9a
brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx1: address b8:ac:6f:85:73:9b
brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
Automatic boot in progress: starting file system checks.
/dev/rsd0a: file system is clean; not checking
/dev/rsd0k: file system is clean; not checking
/dev/rsd0d: file system is clean; not checking
/dev/rsd0f: file system is clean; not checking
/dev/rsd0g: file system is clean; not checking
/dev/rsd0h: file system is clean; not checking
/dev/rsd0j: file system is clean; not checking
/dev/rsd0i: file system is clean; not checking
/dev/rsd0e: file system is clean; not checking
pf enabled
net.inet.ip.forwarding: 0 -> 1
net.inet6.ip6.forwarding: 0 -> 1
net.inet.ip.mforwarding: 0 -> 0
net.inet.icmp.errppslimit: 100 -> 350
net.inet.ip.ifq.maxlen: 2048 -> 2048
net.inet.carp.preempt: 0 -> 1
net.inet.etherip.allow: 0 -> 1
ddb.console: 0 -> 1
ddb.panic: 1 -> 0
machdep.kbdreset: 0 -> 1
kern.splassert: 1 -> 2
kern.nosuidcoredump: 1 -> 3
net.inet.ip.mtudisc: 1 -> 0
starting network
[snip some static route additions]
reordering libraries: done.
ifconfig: SIOCDIFGROUP: No such file or directory
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
running rc.sysmerge
===> Updating /etc/changelist
===> Updating /etc/fbtab
===> Updating /etc/X11/xenodm/GiveConsole
===> Updating /etc/X11/xenodm/TakeConsole
===> Linking /etc/fonts/conf.d/10-hinting-slight.conf
===> Linking /etc/fonts/conf.d/11-lcdfilter-default.conf
===> Linking /etc/fonts/conf.d/45-generic.conf
===> Linking /etc/fonts/conf.d/60-generic.conf
---- /etc/login.conf unhandled, re-run sysmerge to merge the new version
---- /etc/mail/aliases unhandled, re-run sysmerge to merge the new version
---- /etc/ssh/sshd_config unhandled, re-run sysmerge to merge the new version
---- /etc/syslog.conf unhandled, re-run sysmerge to merge the new version
starting network daemons: sshd snmpd ospfd ospf6d
relayduvm_fault(0xfffffd811afd2de0, 0x0, 0, 1) -> e
fatal page fault in supervisor mode
trap type 6 code 0 rip ffffffff810a55fc cs 8 rflags 10282 cr2 0 cpl 0 rsp
ffff8000267e8570
[...as above...]
