On Tue, Aug 09, 2022 at 10:29:41AM -0400, Nick Holland wrote: > On 8/9/22 09:36, Jonathan Gray wrote: > > On Sat, Aug 06, 2022 at 10:28:06AM -0400, Nick Holland wrote: > > > > When looking at top what does Xorg have for WAIT? > > > > > > PID USERNAME PRI NICE SIZE RES STATE WAIT TIME CPU > > > COMMAND > > > 41914 _x11 -22 -1 15M 26M idle schto 0:01 0.00% Xorg > > > > > > > this will run X with the older Mesa driver > > > > MESA_LOADER_DRIVER_OVERRIDE=i965 startx > > > > does that change anything? > > > > > > Changes a little. > > > X doesn't work, same WAIT, same blank screen. > > > BUT... a "reboot" (via ssh) is actually successful(!). > > > > Do you still see that when disabling acceleration? > > > > before starting X create a /etc/X11/xorg.conf with: > > > > Section "Device" > > Identifier "Intel device" > > Driver "modesetting" > > Option "AccelMethod" "none" > > EndSection > > WORKS! > > Also works running xenodm. Probably not a surprise. > > Well, the on-board trackpad doesn't work, but I'm pretty sure that > is not a regression from 7.1 Don't think it worked properly then. > > > xdriinfo will show swrast > > yes > > > glxinfo -B will show llvmpipe > > Among other things, yes: > name of display: :0 > display: :0 screen: 0 > direct rendering: Yes > Extended renderer info (GLX_MESA_query_renderer): > Vendor: Mesa/X.org (0xffffffff) > Device: llvmpipe (LLVM 13.0.0, 128 bits) (0xffffffff) > Version: 21.3.8 > Accelerated: no > Video memory: 3894MB > Unified memory: no > Preferred profile: core (0x1) > Max core profile version: 4.5 > Max compat profile version: 4.5 > Max GLES1 profile version: 1.1 > Max GLES[23] profile version: 3.2 > OpenGL vendor string: Mesa/X.org > OpenGL renderer string: llvmpipe (LLVM 13.0.0, 128 bits) > OpenGL core profile version string: 4.5 (Core Profile) Mesa 21.3.8 > OpenGL core profile shading language version string: 4.50 > OpenGL core profile context flags: (none) > OpenGL core profile profile mask: core profile > > OpenGL version string: 4.5 (Compatibility Profile) Mesa 21.3.8 > OpenGL shading language version string: 4.50 > OpenGL context flags: (none) > OpenGL profile mask: compatibility profile > > OpenGL ES profile version string: OpenGL ES 3.2 Mesa 21.3.8 > OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20 > > > > > > ugen1 at uhub0 port 7 "Realtek 802.11n WLAN Adapter" rev 2.00/2.00 addr 4 > > > > I'm curious why this doesn't match. Can you show usbdevs output? > > evolveiii# usbdevs -v > Controller /dev/usb0: > addr 01: 8086:0000 Intel, xHCI root hub > super speed, self powered, config 1, rev 1.00 > driver: uhub0 > addr 02: 07a6:0986 Admtek Inc., USB to 10/100TX > full speed, power 160 mA, config 1, rev 1.01, iSerial 0001 > driver: aue0 > addr 03: 0bda:0129 Generic, USB2.0-CRW > high speed, power 500 mA, config 1, rev 39.60, iSerial > 20100201396000000 > driver: ugen0 > addr 04: 0bda:d723 Realtek, 802.11n WLAN Adapter > high speed, self powered, config 1, rev 2.00, iSerial 00e04c000001 > driver: ugen1 > addr 05: 058f:3822 Alcor Micro, USB 2.0 Camera > high speed, power 200 mA, config 1, rev 6.02 > driver: uvideo0 > addr 06: 04b3:3100 IBM, product 0x3100 > low speed, power 100 mA, config 1, rev 4.41 > driver: uhidev0 > > (additional -v's didn't help with the realtek adapter) > > don't tease me about getting the wireless working. :)
It appears to be RTL8723DU https://www.realtek.com/en/products/communications-network-ics/item/rtl8723du I gather this would need different firmware/driver to urtwn(4)