Ok, I will check if I have some time to perform installation on actual HW, but the idea is to be able to run it on xen. There is growing interest in using OpenBSD, as a sys-net for Qubes OS instead of the original one based on Linux. So it is crucial for me to be able to use re(4) and iwm(4) with my NICs on Xen. I understand that if the issue will be caused by having xen in the middle I should report the issue to its maintainers.
czw., 15 wrz 2022 o 02:03 Jonathan Gray <j...@jsg.id.au> napisał(a): > On Wed, Sep 14, 2022 at 10:23:32PM +0200, Adam Szewczyk wrote: > > After installation of OpenBSD as HVM on Qubes OS with passed through > > Realtek NIC driver starts to spamming with "re0: watchdog timeout" > message > > and not working. Attaching dmesg. > > Try without xen. It may be messing up interrupts. > > > > > OpenBSD 7.1 (GENERIC.MP) #465: Mon Apr 11 18:03:57 MDT 2022 > > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > real mem = 1040183296 (991MB) > > avail mem = 991436800 (945MB) > > random: good seed from bootblocks > > mpath0 at root > > scsibus0 at mpath0: 256 targets > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xfc100000 (12 entries) > > bios0: vendor Xen version "4.14.5" date 08/24/2022 > > bios0: Xen HVM domU > > acpi0 at bios0: ACPI 4.0 > > acpi0: sleep states S3 S4 S5 > > acpi0: tables DSDT FACP APIC HPET WAET SSDT SSDT > > acpi0: wakeup devices > > acpitimer0 at acpi0: 3579545 Hz, 32 bits > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 48 pins, remapped > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz, 2593.27 MHz, 06-9e-0a > > cpu0: > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,SSE3,PCLMUL,SSSE3,FMA3,CX16,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,CLFLUSHOPT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > > cpu0: 256KB 64b/line 8-way L2 cache > > cpu0: smt 0, core 0, package 0 > > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > > cpu0: apic clock running at 100MHz > > cpu1 at mainbus0: apid 2 (application processor) > > cpu1: Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz, 2592.03 MHz, 06-9e-0a > > cpu1: > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,SSE3,PCLMUL,SSSE3,FMA3,CX16,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,CLFLUSHOPT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > > cpu1: 256KB 64b/line 8-way L2 cache > > cpu1: smt 0, core 1, package 0 > > acpihpet0 at acpi0: 62500000 Hz > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpipci0 at acpi0 PCI0 > > acpicmos0 at acpi0 > > "ACPI0007" at acpi0 not configured > > "ACPI0007" at acpi0 not configured > > acpicpu0 at acpi0: C1(@1 halt!) > > acpicpu1 at acpi0: C1(@1 halt!) > > cpu0: using VERW MDS workaround (except on vmm entry) > > pvbus0 at mainbus0: Xen 4.14 > > xen0 at pvbus0: features 0x2705, 2048 grant table frames, event channel 1 > > xbf0 at xen0 backend 0 channel 6: disk > > scsibus1 at xbf0: 1 targets > > sd0 at scsibus1 targ 0 lun 0: <Xen, phy xvda 51712, 0000> > > sd0: 10240MB, 512 bytes/sector, 20971520 sectors > > xbf1 at xen0 backend 0 channel 7: disk > > scsibus2 at xbf1: 1 targets > > sd1 at scsibus2 targ 0 lun 0: <Xen, phy xvdb 51728, 0000> > > sd1: 2048MB, 512 bytes/sector, 4194304 sectors > > xbf2 at xen0 backend 0 channel 8: disk > > scsibus3 at xbf2: 1 targets > > sd2 at scsibus3 targ 0 lun 0: <Xen, phy xvdc 51744, 0000> > > sd2: 10240MB, 512 bytes/sector, 20971520 sectors > > xnf0 at xen0 backend 113 channel 9: address 00:16:3e:5e:6c:00 > > pci0 at mainbus0 bus 0 > > pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02 > > pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00 > > pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, > channel > > 0 wired to compatibility, channel 1 wired to compatibility > > pciide0: channel 0 disabled (no drives) > > pciide0: channel 1 disabled (no drives) > > piixpm0 at pci0 dev 1 function 3 "Intel 82371AB Power" rev 0x03: SMBus > > disabled > > xspd0 at pci0 dev 2 function 0 "XenSource Platform Device" rev 0x01 > > vga1 at pci0 dev 3 function 0 "Bochs VGA" rev 0x02 > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > > ehci0 at pci0 dev 4 function 0 "Intel 82801DB USB" rev 0x10: apic 1 int > 35 > > usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev > > 2.00/1.00 addr 1 > > re0 at pci0 dev 6 function 0 "Realtek 8168" rev 0x15: RTL8168H/8111H > > (0x5400), msi, address 98:fa:9b:11:d0:cf > > rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0 > > isa0 at pcib0 > > isadma0 at isa0 > > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > > pckbd0 at pckbc0 (kbd slot) > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pms0 at pckbc0 (aux slot) > > wsmouse0 at pms0 mux 0 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > uhidev0 at uhub0 port 1 configuration 1 interface 0 "QEMU QEMU USB > Tablet" > > rev 2.00/0.00 addr 2 > > uhidev0: iclass 3/0 > > ums0 at uhidev0: 3 buttons, Z dir > > wsmouse1 at ums0 mux 0 > > vscsi0 at root > > scsibus4 at vscsi0: 256 targets > > softraid0 at root > > scsibus5 at softraid0: 256 targets > > root on sd0a (e12f8a03b72580b6.a) swap on sd0b dump on sd0b > > fd0 at fdc0 drive 1: density unknown > > re0: watchdog timeout > > re0: watchdog timeout > > re0: watchdog timeout > > >
