After updating my RPi4 to a newer snap, it lost its humidity sensor. dmesg from before and after the update both detect this:
uhidev1 at uhub1 port 2 configuration 1 interface 1 "RDing TEMPERHUM1V1.2" rev 2.00/0.01 addr 3 uhidev1: iclass 3/1 ugold0 at uhidev1 ugold0: 2 sensors type si7006 (temperature and humidity) But the new install only has the temperature sensor available: [weerd@raspberry] $ sysctl hw.sensors.ugold0 hw.sensors.ugold0.temp0=22.32 degC (inner) The diff between old and new dmesg is: -OpenBSD 7.3 (GENERIC.MP) #2079: Fri Mar 24 23:09:40 MDT 2023 +OpenBSD 7.3-current (GENERIC.MP) #2094: Mon Apr 17 01:20:31 MDT 2023 dera...@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/GENERIC.MP -real mem = 4135784448 (3944MB) -avail mem = 3974135808 (3790MB) +real mem = 4135763968 (3944MB) +avail mem = 3972075520 (3788MB) random: good seed from bootblocks mainbus0 at root: Raspberry Pi 4 Model B Rev 1.4 psci0 at mainbus0: PSCI 1.1, SMCCC 1.2 I'm going to build a kernel with the latest change to ugold.c by miod[1] backed out, but since baking kernels takes forever on this machine, I thought I'd report sooner rather than later. Paul [1]: http://cvsweb.openbsd.org/cgi-bin/cvsweb/src/sys/dev/usb/ugold.c.diff?r1=1.21&r2=1.22 --- dmesg ------------------------------------------------------------ OpenBSD 7.3-current (GENERIC.MP) #2094: Mon Apr 17 01:20:31 MDT 2023 dera...@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/GENERIC.MP real mem = 4135763968 (3944MB) avail mem = 3972075520 (3788MB) random: good seed from bootblocks mainbus0 at root: Raspberry Pi 4 Model B Rev 1.4 psci0 at mainbus0: PSCI 1.1, SMCCC 1.2 cpu0 at mainbus0 mpidr 0: ARM Cortex-A72 r0p3 cpu0: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache cpu0: 1024KB 64b/line 16-way L2 cache cpu0: CRC32,ASID16 cpu1 at mainbus0 mpidr 1: ARM Cortex-A72 r0p3 cpu1: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache cpu1: 1024KB 64b/line 16-way L2 cache cpu1: CRC32,ASID16 cpu2 at mainbus0 mpidr 2: ARM Cortex-A72 r0p3 cpu2: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache cpu2: 1024KB 64b/line 16-way L2 cache cpu2: CRC32,ASID16 cpu3 at mainbus0 mpidr 3: ARM Cortex-A72 r0p3 cpu3: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache cpu3: 1024KB 64b/line 16-way L2 cache cpu3: CRC32,ASID16 efi0 at mainbus0: UEFI 2.7 efi0: https://github.com/pftf/RPi4 rev 0x10000 smbios0 at efi0: SMBIOS 3.3.0 smbios0: vendor https://github.com/pftf/RPi4 version "UEFI Firmware v1.32" date 10/19/2021 smbios0: Raspberry Pi Foundation Raspberry Pi 4 Model B apm0 at mainbus0 "system" at mainbus0 not configured "axi" at mainbus0 not configured simplebus0 at mainbus0: "soc" bcmclock0 at simplebus0 bcmmbox0 at simplebus0 bcmgpio0 at simplebus0 bcmaux0 at simplebus0 ampintc0 at simplebus0 nirq 256, ncpu 4 ipi: 0, 1, 2: "interrupt-controller" bcmtmon0 at simplebus0 bcmdmac0 at simplebus0: DMA0 DMA2 DMA4 DMA5 DMA6 DMA7 DMA8 DMA9 DMA10 "timer" at simplebus0 not configured pluart0 at simplebus0: rev 2, 16 byte fifo pluart0: console com0 at simplebus0: ns16550, no working fifo "local_intc" at simplebus0 not configured bcmdog0 at simplebus0 bcmirng0 at simplebus0 "firmware" at simplebus0 not configured "power" at simplebus0 not configured "mailbox" at simplebus0 not configured sdhc0 at simplebus0 sdhc0: SDHC 3.0, 250 MHz base clock sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed "gpiomem" at simplebus0 not configured "fb" at simplebus0 not configured "clocks" at mainbus0 not configured "phy" at mainbus0 not configured "clk-27M" at mainbus0 not configured "clk-108M" at mainbus0 not configured simplebus1 at mainbus0: "emmc2bus" sdhc1 at simplebus1 sdhc1: SDHC 3.0, 100 MHz base clock sdmmc1 at sdhc1: 8-bit, sd high-speed, mmc high-speed, ddr52, dma "arm-pmu" at mainbus0 not configured agtimer0 at mainbus0: 54000 kHz simplebus2 at mainbus0: "scb" bcmpcie0 at simplebus2 pci0 at bcmpcie0 ppb0 at pci0 dev 0 function 0 "Broadcom BCM2711" rev 0x20 pci1 at ppb0 bus 1 xhci0 at pci1 dev 0 function 0 "VIA VL805 xHCI" rev 0x01: intx, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "VIA xHCI root hub" rev 3.00/1.00 addr 1 bse0 at simplebus2: address e4:5f:01:5c:a2:d1 brgphy0 at bse0 phy 1: BCM54210E 10/100/1000baseT PHY, rev. 2 "dma" at simplebus2 not configured "hevc-decoder" at simplebus2 not configured "rpivid-local-intc" at simplebus2 not configured "h264-decoder" at simplebus2 not configured "vp9-decoder" at simplebus2 not configured gpioleds0 at mainbus0: "led0", "led1" "sd_io_1v8_reg" at mainbus0 not configured "sd_vcc_reg" at mainbus0 not configured "fixedregulator_3v3" at mainbus0 not configured "fixedregulator_5v0" at mainbus0 not configured simplebus3 at mainbus0: "v3dbus" "bootloader" at mainbus0 not configured scsibus0 at sdmmc1: 2 targets, initiator 0 sd0 at scsibus0 targ 1 lun 0: <SD/MMC, USDU1, 0020> removable sd0: 29492MB, 512 bytes/sector, 60399616 sectors uhub1 at uhub0 port 1 configuration 1 interface 0 "VIA Labs USB2.0 Hub" rev 2.10/4.21 addr 2 bwfm0 at sdmmc0 function 1 manufacturer 0x02d0, product 0xa9a6 at sdmmc0 function 2 not configured manufacturer 0x02d0, product 0xa9a6 at sdmmc0 function 3 not configured uhidev0 at uhub1 port 2 configuration 1 interface 0 "RDing TEMPERHUM1V1.2" rev 2.00/0.01 addr 3 uhidev0: iclass 3/1, 1 report id ukbd0 at uhidev0 reportid 1: 8 variable keys, 5 key codes wskbd0 at ukbd0 mux 1 uhidev1 at uhub1 port 2 configuration 1 interface 1 "RDing TEMPERHUM1V1.2" rev 2.00/0.01 addr 3 uhidev1: iclass 3/1 ugold0 at uhidev1 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on sd0a (c36da6214101b146.a) swap on sd0b dump on sd0b WARNING: bad clock chip time WARNING: CHECK AND RESET THE DATE! gpio0 at bcmgpio0: 58 pins bwfm0: address e4:5f:01:5c:a2:d2 ugold0: 2 sensors type si7006 (temperature and humidity) ---------------------------------------------------------------------- -- >++++++++[<++++++++++>-]<+++++++.>+++[<------>-]<.>+++[<+ +++++++++++>-]<.>++[<------------>-]<+.--------------.[-] http://www.weirdnet.nl/