Snapshot miniroot77.img with U-Boot firmware on SD card as per INSTALL.arm64
hangs seemingly forever at
ohci0 at mainbus0
UART console, USB-C Power-Delivery and one network port are plugged, nothing
else.
7.7-release with U-Boot 2025.01 behaves the same.
Disabling the driver allows reaching the installer, full console log below.
U-Boot 2025.07 (Aug 15 2025 - 04:19:36 -0600)
Model: FriendlyElec NanoPi R6S
SoC: RK3588S
DRAM: 8 GiB
Core: 341 devices, 30 uclasses, devicetree: separate
MMC: mmc@fe2c0000: 0, mmc@fe2e0000: 1
Loading Environment from nowhere... OK
In: serial@feb50000
Out: serial@feb50000
Err: serial@feb50000
Model: FriendlyElec NanoPi R6S
SoC: RK3588S
Net: eth0: ethernet@fe1c0000
Hit any key to stop autoboot: 0
Scanning for bootflows in all bootdevs
Seq Method State Uclass Part Name Filename
--- ----------- ------ -------- ---- ------------------------
----------------
Scanning global bootmeth 'efi_mgr':
Cannot persist EFI variables without system partition
0 efi_mgr ready (none) 0 <NULL>
** Booting bootflow '<NULL>' with efi_mgr
Booting: Label: mmc 0 Device path:
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b,0000000000000000)/SD(0)/SD(0)
disks: sd0* sd1
>> OpenBSD/arm64 BOOTAA64 1.21
boot> boot -c
cannot open sd0a:/etc/random.seed: No such file or directory
booting sd0a:/bsd: 3038140+1269900+12713856+651088
[267636+91+720816+292418]=0x13f7da0
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2025 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.7-current (RAMDISK) #64: Wed Aug 20 06:38:20 MDT 2025
[email protected]:/usr/src/sys/arch/arm64/compile/RAMDISK
real mem = 8585994240 (8188MB)
avail mem = 8236179456 (7854MB)
User Kernel Config
UKC> disable ohci
89 ohci* disabled
148 ohci* disabled
289 ohci* disabled
UKC> exit
Continuing...
random: good seed from bootblocks
mainbus0 at root: FriendlyElec NanoPi R6S
psci0 at mainbus0: PSCI 1.1, SMCCC 1.2, SYSTEM_SUSPEND
efi0 at mainbus0: UEFI 2.11
efi0: Das U-Boot rev 0x20250700
smbios0 at efi0: SMBIOS 3.7.0
smbios0: vendor U-Boot version "2025.07" date 07/01/2025
smbios0: friendlyarm FriendlyElec NanoPi R6S
cpu0 at mainbus0 mpidr 0: ARM Cortex-A55 r2p0
cpu0: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 128KB 64b/line 4-way L2 cache
cpu0: 4096KB 64b/line 16-way L3 cache
cpu0:
DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,RAS,AdvSIMD+HP,FP+HP,SSBS
"optee" at mainbus0 not configured
scmi0 at mainbus0: SCMI 2.0
syscon0 at mainbus0: "syscon"
syscon1 at mainbus0: "syscon"
syscon2 at mainbus0: "syscon"
syscon3 at mainbus0: "syscon"
syscon4 at mainbus0: "syscon"
syscon5 at mainbus0: "syscon"
syscon6 at mainbus0: "syscon"
syscon7 at mainbus0: "syscon"
syscon8 at mainbus0: "syscon"
syscon9 at mainbus0: "syscon"
syscon10 at mainbus0: "syscon"
rkusbphy0 at syscon10: phy 0
syscon11 at mainbus0: "syscon"
rkusbphy1 at syscon11: phy 2
syscon12 at mainbus0: "syscon"
syscon13 at mainbus0: "syscon"
syscon14 at mainbus0: "syscon"
rkclock0 at mainbus0
CRU_GATE_CON20: 0x0000aa05
CRU_GATE_CON21: 0x000000a0
CRU_GATE_CON22: 0x00000263
CRU_GATE_CON23: 0x0000aa05
CRU_GATE_CON24: 0x000000a0
CRU_GATE_CON25: 0x00000263
syscon15 at mainbus0: "power-management"
"power-controller" at syscon15 not configured
syscon16 at mainbus0: "qos"
syscon17 at mainbus0: "qos"
syscon18 at mainbus0: "qos"
syscon19 at mainbus0: "qos"
syscon20 at mainbus0: "qos"
syscon21 at mainbus0: "qos"
syscon22 at mainbus0: "qos"
syscon23 at mainbus0: "qos"
syscon24 at mainbus0: "qos"
syscon25 at mainbus0: "qos"
syscon26 at mainbus0: "qos"
syscon27 at mainbus0: "qos"
syscon28 at mainbus0: "qos"
syscon29 at mainbus0: "qos"
syscon30 at mainbus0: "qos"
syscon31 at mainbus0: "qos"
syscon32 at mainbus0: "qos"
syscon33 at mainbus0: "qos"
syscon34 at mainbus0: "qos"
syscon35 at mainbus0: "qos"
syscon36 at mainbus0: "qos"
syscon37 at mainbus0: "qos"
syscon38 at mainbus0: "qos"
syscon39 at mainbus0: "qos"
syscon40 at mainbus0: "qos"
syscon41 at mainbus0: "qos"
syscon42 at mainbus0: "qos"
syscon43 at mainbus0: "qos"
syscon44 at mainbus0: "qos"
syscon45 at mainbus0: "qos"
syscon46 at mainbus0: "qos"
syscon47 at mainbus0: "qos"
syscon48 at mainbus0: "qos"
syscon49 at mainbus0: "qos"
syscon50 at mainbus0: "qos"
syscon51 at mainbus0: "qos"
syscon52 at mainbus0: "qos"
syscon53 at mainbus0: "qos"
syscon54 at mainbus0: "qos"
syscon55 at mainbus0: "qos"
syscon56 at mainbus0: "qos"
syscon57 at mainbus0: "qos"
syscon58 at mainbus0: "qos"
syscon59 at mainbus0: "qos"
syscon60 at mainbus0: "qos"
syscon61 at mainbus0: "qos"
syscon62 at mainbus0: "qos"
syscon63 at mainbus0: "qos"
agintc0 at mainbus0 mbi shift 4:4 nirq 512 nredist 8: "interrupt-controller"
agintcmsi0 at agintc0
agintcmsi1 at agintc0
rkcomphy0 at mainbus0
rkcomphy1 at mainbus0
rkpinctrl0 at mainbus0: "pinctrl"
rkgpio0 at rkpinctrl0
rkgpio1 at rkpinctrl0
rkgpio2 at rkpinctrl0
rkgpio3 at rkpinctrl0
rkgpio4 at rkpinctrl0
"fit-images" at mainbus0 not configured
"l3-cache" at mainbus0 not configured
"display-subsystem" at mainbus0 not configured
"firmware" at mainbus0 not configured
"pmu-a55" at mainbus0 not configured
"pmu-a76" at mainbus0 not configured
"clock-0" at mainbus0 not configured
agtimer0 at mainbus0: 24000 kHz
"clock-1" at mainbus0 not configured
"clock-2" at mainbus0 not configured
"sram" at mainbus0 not configured
"gpu" at mainbus0 not configured
xhci0 at mainbus0, xHCI 1.10
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Generic xHCI root hub" rev 3.00/1.00
addr 1
ehci0 at mainbus0
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00
addr 1
"usb" at mainbus0 not configured
"iommu" at mainbus0 not configured
"sram" at mainbus0 not configured
rkiic0 at mainbus0
iic0 at rkiic0
"rockchip,rk8602" at iic0 addr 0x42 not configured
"rockchip,rk8603" at iic0 addr 0x43 not configured
"video-codec" at mainbus0 not configured
"iommu" at mainbus0 not configured
"rga" at mainbus0 not configured
"video-codec" at mainbus0 not configured
"iommu" at mainbus0 not configured
"video-codec" at mainbus0 not configured
"iommu" at mainbus0 not configured
"video-codec" at mainbus0 not configured
"iommu" at mainbus0 not configured
"video-codec" at mainbus0 not configured
"iommu" at mainbus0 not configured
"video-codec" at mainbus0 not configured
"vop" at mainbus0 not configured
"iommu" at mainbus0 not configured
"hdmi" at mainbus0 not configured
"qos" at mainbus0 not configured
"qos" at mainbus0 not configured
"dfi" at mainbus0 not configured
dwpcie0 at mainbus0
dwpcie1 at mainbus0
dwqe0 at mainbus0 gmac 1: rev 0x51, address 5e:27:b1:14:a9:c9
rgephy0 at dwqe0 phy 1: RTL8169S/8110S/8211, rev. 6
dwmmc0 at mainbus0: 49 MHz base clock
sdmmc0 at dwmmc0: 4-bit, sd high-speed, dma
dwmshc0 at mainbus0
dwmshc0: SDHC 4.20, 200 MHz base clock
sdmmc1 at dwmshc0: 8-bit, sd high-speed, mmc high-speed, dma
"rng" at mainbus0 not configured
"interrupt-controller" at mainbus0 not configured
"dma-controller" at mainbus0 not configured
"dma-controller" at mainbus0 not configured
rkiic1 at mainbus0
iic1 at rkiic1
"rockchip,rk8602" at iic1 addr 0x42 not configured
"timer" at mainbus0 not configured
"watchdog" at mainbus0 not configured
rkspi0 at mainbus0
rkpmic0 at rkspi0: RK806
com0 at mainbus0: dw16550, 64 byte fifo
com0: console
"tsadc" at mainbus0 not configured
"adc" at mainbus0 not configured
rkiic2 at mainbus0
iic2 at rkiic2
pcxrtc0 at iic2 addr 0x51: battery low
"efuse" at mainbus0 not configured
"dma-controller" at mainbus0 not configured
"phy" at mainbus0 not configured
"phy" at mainbus0 not configured
"phy" at mainbus0 not configured
"phy" at mainbus0 not configured
"sram" at mainbus0 not configured
"pinctrl" at mainbus0 not configured
"opp-table-cluster0" at mainbus0 not configured
"opp-table-cluster1" at mainbus0 not configured
"opp-table-cluster2" at mainbus0 not configured
"opp-table" at mainbus0 not configured
"adc-keys" at mainbus0 not configured
"gpio-keys" at mainbus0 not configured
"hdmi-con" at mainbus0 not configured
"leds" at mainbus0 not configured
"regulator-vcc5v0-sys" at mainbus0 not configured
"regulator-vcc-1v1-nldo-s3" at mainbus0 not configured
"regulator-vcc-3v3-s0" at mainbus0 not configured
"regulator-vcc-3v3-sd-s0" at mainbus0 not configured
"regulator-vcc3v3-pcie20" at mainbus0 not configured
"regulator-vcc5v0-usb" at mainbus0 not configured
"regulator-vcc5v0-usb-otg0" at mainbus0 not configured
"regulator-vcc5v0-host-20" at mainbus0 not configured
"binman" at mainbus0 not configured
"dmc" at mainbus0 not configured
pci0 at dwpcie0
ppb0 at pci0 dev 0 function 0 "Rockchip RK3588" rev 0x00
pci1 at ppb0 bus 49
rge0 at pci1 dev 0 function 0 "Realtek RTL8125" rev 0x05: msix, address
00:00:00:00:00:00
pci2 at dwpcie1
ppb1 at pci2 dev 0 function 0 "Rockchip RK3588" rev 0x00
pci3 at ppb1 bus 65
rge1 at pci3 dev 0 function 0 "Realtek RTL8125" rev 0x05: msix, address
00:00:00:00:00:00
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <Sandisk, SU32G, 0080> removable
sd0: 30436MB, 512 bytes/sector, 62333952 sectors
scsibus1 at sdmmc1: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <SD/MMC, A3A551, 0000>
sd1: 29600MB, 512 bytes/sector, 60620800 sectors
softraid0 at root
scsibus2 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
WARNING: bad clock chip time
WARNING: CHECK AND RESET THE DATE!
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/arm64 7.7 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell?
