> Date: Mon, 22 Sep 2025 20:30:45 +0200 > From: Justin Berthault <[email protected]> > > Command results attached.
Thanks, so the pixel order advertised in the device tree didn't change. I can reproduce the issue on my Raspberry Pi 4B and did some digging. Found a commit message that indicates there are changes in the firmware related to pixel order. What I'm reading is very confusing though and I need to dig a little bit deeper. Stay tuned! Cheers, Mark > Le 22 septembre 2025 16:18:14 GMT+02:00, Mark Kettenis > <[email protected]> a écrit : > >> Date: Sun, 21 Sep 2025 19:05:16 +0200 > >> From: Justin Berthault <[email protected]> > >> > >> Hi, > >> > >> As of today, latest snapshot is from September 18. > >> > >> I installed OpenBSD as usual but noticed that blue and red are inversed on > >> the monitor, which is not the case with 7.7 img. > >> > >> I dug a little bit and found that copying start4.elf from 7.7 to the > >> snapshot boot partition fixed the color inversion. > >> > >> Let me know if you need anything. > >> Have a good day. > > > >Can you send the output of "eeprom -p" with the old and the new start4.elf? > > > >Thanks, > > > >Mark > >
