Hi,
Killing zzz(8) while the system is suspending causes apmd to exit non-zero.
Steps to reproduce:
- run apmd in the foreground so we can see what it is doing:
# apmd -d
- In another terminal run `zzz`, but quickly after spawning it (before the
system goes down), kill it by pressing ctrl+c.
$ zzz
Suspending system...
^C
$
- The system will continue to suspend. When it's asleep, wake it back up with
the power button or lid.
- As the system is waking up, apmd will exit non-zero!
system suspending
battery status: charging. external power status: connected. estimated
battery life 77% (37 minutes recharge time estimate)
do_etc_file(): cannot access file /etc/apm/suspend
# echo $?
141
I've reproduced this on two separate amd64 machines, one a desktop system, the
other an older thinkpad x1 5th gen.
This is with a December 18th snapshot, but it works on an older snap too (a few
weeks old from memory).
dmesg for the thinkpad follows.
Cheers. Happy holidays!
OpenBSD 7.8-current (GENERIC.MP) #167: Thu Dec 18 11:02:13 MST 2025
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 17049186304 (16259MB)
avail mem = 16505487360 (15740MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x5a6bc000 (62 entries)
bios0: vendor LENOVO version "N1MET76W (1.61 )" date 11/15/2023
bios0: LENOVO 20HQS49Q00
efi0 at bios0: UEFI 2.5
efi0: Lenovo rev 0x1610
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT TPM2 UEFI SSDT SSDT HPET APIC MCFG ECDT SSDT BOOT
BATB SSDT SSDT SSDT WSMT SSDT SSDT DBGP DBG2 MSDM DMAR ASF! FPDT UEFI
acpi0: wakeup devices GLAN(S4) XHC_(S3) XDCI(S4) HDAS(S4) RP01(S4) RP02(S4)
RP04(S4) RP05(S4) RP06(S4) RP07(S4) RP08(S4) RP09(S4) RP10(S4) RP11(S4)
RP12(S4) RP13(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 23999999 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz, 2592.34 MHz, 06-8e-09, patch
000000f6
cpu0: cpuid 1
edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
ecx=77fafbbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=27f7<SENSOR,ARAT,PTS> ecx=9<EFFFREQ>
cpu0: cpuid 7.0
ebx=29c67af<FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT>
edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG>
ecx=121<LAHF,ABM,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr 10a=a000c04<RSBA,MISC_PKG_CT,ENERGY_FILT,GDS_CTRL,RFDS_NO>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line
4-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz, 2593.97 MHz, 06-8e-09, patch
000000f6
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz, 2593.96 MHz, 06-8e-09, patch
000000f6
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz, 2593.96 MHz, 06-8e-09, patch
000000f6
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf0000000, bus 0-127
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus 4 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus 5 (RP05)
acpiprt6 at acpi0: bus -1 (RP06)
acpiprt7 at acpi0: bus -1 (RP07)
acpiprt8 at acpi0: bus -1 (RP08)
acpiprt9 at acpi0: bus 6 (RP09)
acpiprt10 at acpi0: bus -1 (RP10)
acpiprt11 at acpi0: bus -1 (RP11)
acpiprt12 at acpi0: bus -1 (RP12)
acpiprt13 at acpi0: bus -1 (RP13)
acpiprt14 at acpi0: bus -1 (RP14)
acpiprt15 at acpi0: bus -1 (RP15)
acpiprt16 at acpi0: bus -1 (RP16)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
acpithinkpad0 at acpi0: version 2.0
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "01AV430" serial 29509 type LiP oem "LGC"
acpicmos0 at acpi0
"LEN0071" at acpi0 not configured
"LEN0072" at acpi0 not configured
acpibtn0 at acpi0: SLPB(wakeup)
"PNP0C14" at acpi0 not configured
acpibtn1 at acpi0: LID_(wakeup)
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x10
"USBC000" at acpi0 not configured
acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for XHC_
acpipwrres1 at acpi0: WRST
acpipwrres2 at acpi0: WRST
acpitz0 at acpi0
acpitz0: critical temperature is 128 degC
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 2592 MHz: speeds: 2701, 2700, 2600, 2500, 2400, 2200,
2000, 1800, 1600, 1500, 1300, 1100, 800, 700, 600, 400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 7G Host" rev 0x02
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 620" rev 0x02
drm0 at inteldrm0
inteldrm0: msi, KABYLAKE, gen 9
"Intel Core GMM" rev 0x00 at pci0 dev 8 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21
"Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci1 at ppb0 bus 2
rtsx0 at pci1 dev 0 function 0 "Realtek RTS525A Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit, dma
ppb1 at pci0 dev 28 function 2 "Intel 100 Series PCIE" rev 0xf1: msi
pci2 at ppb1 bus 4
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless-AC 8265" rev 0x88, msi
ppb2 at pci0 dev 28 function 4 "Intel 100 Series PCIE" rev 0xf1: msi
pci3 at ppb2 bus 5
nvme0 at pci3 dev 0 function 0 "Samsung SM981/PM981" rev 0x00: msix, NVMe 1.2
nvme0: SAMSUNG MZVLB512HAJQ-000L7, firmware 5L2QEXA7, serial S3TNNE0JB16355
scsibus1 at nvme0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <NVMe, SAMSUNG MZVLB512, 5L2Q>
sd0: 488386MB, 512 bytes/sector, 1000215216 sectors
ppb3 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci4 at ppb3 bus 6
pcib0 at pci0 dev 31 function 0 "Intel 200 Series LPC" rev 0x21
"Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x21: msi
azalia0: codecs: Conexant/0x2008, Intel/0x280b, using Conexant/0x2008
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21: apic 2 int
16
iic0 at ichiic0
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x21: msi, address
54:e1:ad:d9:44:a7
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.2, 0x1e2b1 0x940300 0x33d940 0xf002a3
0x12e800
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Logitech USB Receiver" rev
2.00/5.03 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub0 port 1 configuration 1 interface 1 "Logitech USB Receiver" rev
2.00/5.03 addr 2
uhidev1: iclass 3/1, 11 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse2 at ums0 mux 0
ucc0 at uhidev1 reportid 3: 767 usages, 20 keys, array
wskbd2 at ucc0 mux 1
uhid0 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 11: input=2, output=0, feature=0
uhidev2 at uhub0 port 1 configuration 1 interface 2 "Logitech USB Receiver" rev
2.00/5.03 addr 2
uhidev2: iclass 3/0, 17 report ids
uhidpp0 at uhidev2 device 2 trackball "ERGO M575S"
uhidev3 at uhub0 port 1 configuration 1 interface 3 "Logitech USB Receiver" rev
2.00/5.03 addr 2
uhidev3: iclass 3/0, 42 report ids
uhid2 at uhidev3 reportid 40: input=28, output=0, feature=0
uhid3 at uhidev3 reportid 41: input=0, output=0, feature=1
uhid4 at uhidev3 reportid 42: input=0, output=0, feature=256
uhidev4 at uhub0 port 2 configuration 1 interface 0 "ZSA Technology Labs
Voyager" rev 2.00/0.01 addr 3
uhidev4: iclass 3/1
ukbd1 at uhidev4: 8 variable keys, 6 key codes
wskbd3 at ukbd1 mux 1
uhidev5 at uhub0 port 2 configuration 1 interface 1 "ZSA Technology Labs
Voyager" rev 2.00/0.01 addr 3
uhidev5: iclass 3/0
uhid5 at uhidev5: input=32, output=32, feature=0
uhidev6 at uhub0 port 2 configuration 1 interface 2 "ZSA Technology Labs
Voyager" rev 2.00/0.01 addr 3
uhidev6: iclass 3/0, 6 report ids
uhid6 at uhidev6 reportid 3: input=2, output=0, feature=0
ucc1 at uhidev6 reportid 4: 672 usages, 20 keys, array
wskbd4 at ucc1 mux 1
ukbd2 at uhidev6 reportid 6: 128 variable keys, 0 key codes
wskbd5 at ukbd2 mux 1
uvideo0 at uhub0 port 8 configuration 1 interface 0 "SunplusIT Inc Integrated
Camera" rev 2.00/16.07 addr 4
video0 at uvideo0
ugen0 at uhub0 port 9 "Validity Sensors product 0x0097" rev 2.00/1.64 addr 5
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd1: 488385MB, 512 bytes/sector, 1000213601 sectors
root on sd1a (6fa274d7628575f9.a) swap on sd1b dump on sd1b
inteldrm0: 2560x1440, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wskbd3: connecting to wsdisplay0
wskbd4: connecting to wsdisplay0
wskbd5: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
iwm0: hw rev 0x230, fw ver 36.ca7b901d.0, address f8:94:c2:86:c0:b8
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
wsmouse2 detached
ums0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhid0 detached
uhid1 detached
uhidev1 detached
uhidpp0 detached
uhidev2 detached
uhid2 detached
uhid3 detached
uhid4 detached
uhidev3 detached
wskbd3: disconnecting from wsdisplay0
wskbd3 detached
ukbd1 detached
uhidev4 detached
uhid5 detached
uhidev5 detached
uhid6 detached
wskbd4: disconnecting from wsdisplay0
wskbd4 detached
ucc1 detached
wskbd5: disconnecting from wsdisplay0
wskbd5 detached
ukbd2 detached
uhidev6 detached
video0 detached
uvideo0 detached
ugen0 detached
uhub0 detached
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
wakeups: 0 1
wakeup event: unknown
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Logitech USB Receiver" rev
2.00/5.03 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1 "Logitech USB Receiver" rev
2.00/5.03 addr 2
uhidev1: iclass 3/1, 11 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse2 at ums0 mux 0
ucc0 at uhidev1 reportid 3: 767 usages, 20 keys, array
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
uhid0 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 11: input=2, output=0, feature=0
uhidev2 at uhub0 port 1 configuration 1 interface 2 "Logitech USB Receiver" rev
2.00/5.03 addr 2
uhidev2: iclass 3/0, 17 report ids
uhidpp0 at uhidev2 device 2 trackball "ERGO M575S"
uhidev3 at uhub0 port 1 configuration 1 interface 3 "Logitech USB Receiver" rev
2.00/5.03 addr 2
uhidev3: iclass 3/0, 42 report ids
uhid2 at uhidev3 reportid 40: input=28, output=0, feature=0
uhid3 at uhidev3 reportid 41: input=0, output=0, feature=1
uhid4 at uhidev3 reportid 42: input=0, output=0, feature=256
uhidev4 at uhub0 port 2 configuration 1 interface 0 "ZSA Technology Labs
Voyager" rev 2.00/0.01 addr 3
uhidev4: iclass 3/1
ukbd1 at uhidev4: 8 variable keys, 6 key codes
wskbd3 at ukbd1 mux 1
wskbd3: connecting to wsdisplay0
uhidev5 at uhub0 port 2 configuration 1 interface 1 "ZSA Technology Labs
Voyager" rev 2.00/0.01 addr 3
uhidev5: iclass 3/0
uhid5 at uhidev5: input=32, output=32, feature=0
uhidev6 at uhub0 port 2 configuration 1 interface 2 "ZSA Technology Labs
Voyager" rev 2.00/0.01 addr 3
uhidev6: iclass 3/0, 6 report ids
uhid6 at uhidev6 reportid 3: input=2, output=0, feature=0
ucc1 at uhidev6 reportid 4: 672 usages, 20 keys, array
wskbd4 at ucc1 mux 1
wskbd4: connecting to wsdisplay0
ukbd2 at uhidev6 reportid 6: 128 variable keys, 0 key codes
wskbd5 at ukbd2 mux 1
wskbd5: connecting to wsdisplay0
uvideo0 at uhub0 port 8 configuration 1 interface 0 "SunplusIT Inc Integrated
Camera" rev 2.00/16.07 addr 4
video0 at uvideo0
ugen0 at uhub0 port 9 "Validity Sensors product 0x0097" rev 2.00/1.64 addr 5
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
wsmouse2 detached
ums0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhid0 detached
uhid1 detached
uhidev1 detached
uhidpp0 detached
uhidev2 detached
uhid2 detached
uhid3 detached
uhid4 detached
uhidev3 detached
wskbd3: disconnecting from wsdisplay0
wskbd3 detached
ukbd1 detached
uhidev4 detached
uhid5 detached
uhidev5 detached
uhid6 detached
wskbd4: disconnecting from wsdisplay0
wskbd4 detached
ucc1 detached
wskbd5: disconnecting from wsdisplay0
wskbd5 detached
ukbd2 detached
uhidev6 detached
video0 detached
uvideo0 detached
ugen0 detached
uhub0 detached
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
wakeups: 0 1
wakeup event: unknown
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Logitech USB Receiver" rev
2.00/5.03 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1 "Logitech USB Receiver" rev
2.00/5.03 addr 2
uhidev1: iclass 3/1, 11 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse2 at ums0 mux 0
ucc0 at uhidev1 reportid 3: 767 usages, 20 keys, array
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
uhid0 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 11: input=2, output=0, feature=0
uhidev2 at uhub0 port 1 configuration 1 interface 2 "Logitech USB Receiver" rev
2.00/5.03 addr 2
uhidev2: iclass 3/0, 17 report ids
uhidpp0 at uhidev2 device 2 trackball "ERGO M575S"
uhidev3 at uhub0 port 1 configuration 1 interface 3 "Logitech USB Receiver" rev
2.00/5.03 addr 2
uhidev3: iclass 3/0, 42 report ids
uhid2 at uhidev3 reportid 40: input=28, output=0, feature=0
uhid3 at uhidev3 reportid 41: input=0, output=0, feature=1
uhid4 at uhidev3 reportid 42: input=0, output=0, feature=256
uhidev4 at uhub0 port 2 configuration 1 interface 0 "ZSA Technology Labs
Voyager" rev 2.00/0.01 addr 3
uhidev4: iclass 3/1
ukbd1 at uhidev4: 8 variable keys, 6 key codes
wskbd3 at ukbd1 mux 1
wskbd3: connecting to wsdisplay0
uhidev5 at uhub0 port 2 configuration 1 interface 1 "ZSA Technology Labs
Voyager" rev 2.00/0.01 addr 3
uhidev5: iclass 3/0
uhid5 at uhidev5: input=32, output=32, feature=0
uhidev6 at uhub0 port 2 configuration 1 interface 2 "ZSA Technology Labs
Voyager" rev 2.00/0.01 addr 3
uhidev6: iclass 3/0, 6 report ids
uhid6 at uhidev6 reportid 3: input=2, output=0, feature=0
ucc1 at uhidev6 reportid 4: 672 usages, 20 keys, array
wskbd4 at ucc1 mux 1
wskbd4: connecting to wsdisplay0
ukbd2 at uhidev6 reportid 6: 128 variable keys, 0 key codes
wskbd5 at ukbd2 mux 1
wskbd5: connecting to wsdisplay0
uvideo0 at uhub0 port 8 configuration 1 interface 0 "SunplusIT Inc Integrated
Camera" rev 2.00/16.07 addr 4
video0 at uvideo0
ugen0 at uhub0 port 9 "Validity Sensors product 0x0097" rev 2.00/1.64 addr 5
--
Best Regards
Edd Barrett
https://www.theunixzoo.co.uk
