It should work if you change the order of contacts (that is, the finger that should control the pointer must be the first one to touch the clickpad surface).
This shouldn't be a problem because usually, you have to move the pointer to some target before you can start the click-and-drag gesture. With devices having multitouch support in OpenBSD, the order is not relevant, but the pms driver doesn't provide "true" MT support for these touchpads. pms receives a contact count, but if there is more than one touch, it's the Synaptics firmware that determines which one is reported to the driver. On 3/14/26 09:35, Marc Lasch wrote: > The touchpad (clickpad) on Thinkpad x1 gen5 does not recognize click-to-drag > actions. > > How to reproduce the problem: Hold down (physical press the touchpad) with > one finger, then try to drag with a second finger. Expected behavior would be > to move the mouse pointer with the second finger but there are no events for > that. > > - wsconsctl mouse.rawmode=1 silently fails > - xinput test-xi2 shows no motion events for second finger during clickpad > press > - Works correctly on Linux with same hardware > - ThinkPad X1 Gen5, Synaptics clickpad firmware 8.2 > > dmesg: > > OpenBSD 7.8 (GENERIC.MP) #54: Sun Oct 12 12:58:11 MDT 2025 > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 17037717504 (16248MB) > avail mem = 16494510080 (15730MB) > random: good seed from bootblocks > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x5a6fc000 (62 entries) > bios0: vendor LENOVO version "N1MET77W (1.62 )" date 02/15/2024 > bios0: LENOVO 20HQS3MS00 > efi0 at bios0: UEFI 2.5 > efi0: Lenovo rev 0x1620 > acpi0 at bios0: ACPI 5.0 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SSDT TPM2 UEFI SSDT SSDT HPET APIC MCFG ECDT SSDT > BOOT BATB SSDT SSDT SSDT WSMT SSDT SSDT DBGP DBG2 POAT DMAR ASF! FPDT BGRT > UEFI > acpi0: wakeup devices GLAN(S4) XHC_(S3) XDCI(S4) HDAS(S4) RP01(S4) RP02(S4) > RP04(S4) RP05(S4) RP06(S4) RP07(S4) RP08(S4) RP09(S4) RP10(S4) RP11(S4) > RP12(S4) RP13(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 23999999 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i7-7600U CPU @ 2.80GHz, 2693.73 MHz, 06-8e-09, patch > 000000f6 > cpu0: cpuid 1 > edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > ecx=77fafbff<SSE3,PCLMUL,DTES64,MWAIT,DS- > CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND> > cpu0: cpuid 6 eax=27f7<SENSOR,ARAT,PTS> ecx=9<EFFFREQ> > cpu0: cpuid 7.0 > ebx=29c6fbf<FSGSBASE,TSC_ADJUST,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> > edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD> > cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 > cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES> > cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> > ecx=121<LAHF,ABM,3DNOWP> > cpu0: cpuid 80000007 edx=100<ITSC> > cpu0: msr 10a=a000c04<RSBA,MISC_PKG_CT,ENERGY_FILT,GDS_CTRL,RFDS_NO> > cpu0: MELTDOWN > cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB > 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 24MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Core(TM) i7-7600U CPU @ 2.80GHz, 2693.73 MHz, 06-8e-09, patch > 000000f6 > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 1 (application processor) > cpu2: Intel(R) Core(TM) i7-7600U CPU @ 2.80GHz, 2693.73 MHz, 06-8e-09, patch > 000000f6 > cpu2: smt 1, core 0, package 0 > cpu3 at mainbus0: apid 3 (application processor) > cpu3: Intel(R) Core(TM) i7-7600U CPU @ 2.80GHz, 2693.73 MHz, 06-8e-09, patch > 000000f6 > cpu3: smt 1, core 1, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins > acpimcfg0 at acpi0 > acpimcfg0: addr 0xf0000000, bus 0-127 > acpiec0 at acpi0 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 2 (RP01) > acpiprt2 at acpi0: bus -1 (RP02) > acpiprt3 at acpi0: bus 4 (RP03) > acpiprt4 at acpi0: bus -1 (RP04) > acpiprt5 at acpi0: bus 5 (RP05) > acpiprt6 at acpi0: bus -1 (RP06) > acpiprt7 at acpi0: bus -1 (RP07) > acpiprt8 at acpi0: bus -1 (RP08) > acpiprt9 at acpi0: bus 6 (RP09) > acpiprt10 at acpi0: bus -1 (RP10) > acpiprt11 at acpi0: bus -1 (RP11) > acpiprt12 at acpi0: bus -1 (RP12) > acpiprt13 at acpi0: bus -1 (RP13) > acpiprt14 at acpi0: bus -1 (RP14) > acpiprt15 at acpi0: bus -1 (RP15) > acpiprt16 at acpi0: bus -1 (RP16) > acpiprt17 at acpi0: bus -1 (RP17) > acpiprt18 at acpi0: bus -1 (RP18) > acpiprt19 at acpi0: bus -1 (RP19) > acpiprt20 at acpi0: bus -1 (RP20) > acpiprt21 at acpi0: bus -1 (RP21) > acpiprt22 at acpi0: bus -1 (RP22) > acpiprt23 at acpi0: bus -1 (RP23) > acpiprt24 at acpi0: bus -1 (RP24) > acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000 > acpithinkpad0 at acpi0: version 2.0 > acpiac0 at acpi0: AC unit online > acpibat0 at acpi0: BAT0 model "430" serial 9001 type LiP oem "LGC" > acpicmos0 at acpi0 > "LEN0071" at acpi0 not configured > "LEN0072" at acpi0 not configured > acpibtn0 at acpi0: SLPB(wakeup) > "PNP0C14" at acpi0 not configured > acpibtn1 at acpi0: LID_(wakeup) > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev > 0x10 > "USBC000" at acpi0 not configured > acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpipwrres0 at acpi0: PUBS, resource for XHC_ > acpipwrres1 at acpi0: WRST > acpipwrres2 at acpi0: WRST > acpitz0 at acpi0 > acpitz0: critical temperature is 128 degC > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD1F > cpu0: using VERW MDS workaround (except on vmm entry) > cpu0: Enhanced SpeedStep 2693 MHz: speeds: 2801, 2800, 2700, 2500, 2400, > 2200, 2000, 1800, 1600, 1500, 1300, 1100, 800, 700, 600, 400 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 7G Host" rev 0x02 > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 620" rev 0x02 > drm0 at inteldrm0 > inteldrm0: msi, KABYLAKE, gen 9 > "Intel Core GMM" rev 0x00 at pci0 dev 8 function 0 not configured > xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi, xHCI > 1.0 > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 > addr 1 > pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21 > "Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured > ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi > pci1 at ppb0 bus 2 > rtsx0 at pci1 dev 0 function 0 "Realtek RTS525A Card Reader" rev 0x01: msi > sdmmc0 at rtsx0: 4-bit, dma > ppb1 at pci0 dev 28 function 2 "Intel 100 Series PCIE" rev 0xf1: msi > pci2 at ppb1 bus 4 > iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless-AC 8265" rev 0x88, msi > ppb2 at pci0 dev 28 function 4 "Intel 100 Series PCIE" rev 0xf1: msi > pci3 at ppb2 bus 5 > nvme0 at pci3 dev 0 function 0 "Samsung SM981/PM981" rev 0x00: msix, NVMe 1.3 > nvme0: Samsung SSD 970 EVO Plus 2TB, firmware 4B2QEXM7, serial S6P1NS0W325871Y > scsibus1 at nvme0: 2 targets, initiator 0 > sd0 at scsibus1 targ 1 lun 0: <NVMe, Samsung SSD 970, 4B2Q> > sd0: 1907729MB, 512 bytes/sector, 3907029168 sectors > ppb3 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: msi > pci4 at ppb3 bus 6 > pcib0 at pci0 dev 31 function 0 "Intel 200 Series LPC" rev 0x21 > "Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured > azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x21: msi > azalia0: codecs: Conexant/0x2008, Intel/0x280b, using Conexant/0x2008 > audio0 at azalia0 > ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21: apic 2 > int 16 > iic0 at ichiic0 > em0 at pci0 dev 31 function 6 "Intel I219-LM" rev 0x21: msi, address > 54:e1:ad:74:2b:f1 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > wsmouse1 at pms0 mux 0 > pms0: Synaptics clickpad, firmware 8.2, 0x1e2a1 0x940300 0x31d840 0xf003a3 > 0x12e800 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > vmm0 at mainbus0: VMX/EPT > efifb at mainbus0 not configured > ugen0 at uhub0 port 7 "Intel Bluetooth" rev 2.00/0.10 addr 2 > uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics > Co.,Ltd. Integrated Camera" rev 2.00/0.06 addr 3 > video0 at uvideo0 > ugen1 at uhub0 port 9 "Validity Sensors product 0x0097" rev 2.00/1.64 addr 4 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> > sd1: 595758MB, 512 bytes/sector, 1220114047 sectors > root on sd1a (0eed1cb293bd91de.a) swap on sd1b dump on sd1b > WARNING: clock gained 47 days > WARNING: CHECK AND RESET THE DATE! > inteldrm0: 2560x1440, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 > wsdisplay0: screen 1-5 added (std, vt100 emulation) > iwm0: hw rev 0x230, fw ver 36.ca7b901d.0, address a0:af:bd:19:30:ac > syncing disks... done > rebooting... > OpenBSD 7.8 (GENERIC.MP) #5: Fri Mar 13 06:06:19 MDT 2026 > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 17037717504 (16248MB) > avail mem = 16494485504 (15730MB) > random: good seed from bootblocks > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x5a6fc000 (62 entries) > bios0: vendor LENOVO version "N1MET77W (1.62 )" date 02/15/2024 > bios0: LENOVO 20HQS3MS00 > efi0 at bios0: UEFI 2.5 > efi0: Lenovo rev 0x1620 > acpi0 at bios0: ACPI 5.0 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SSDT TPM2 UEFI SSDT SSDT HPET APIC MCFG ECDT SSDT > BOOT BATB SSDT SSDT SSDT WSMT SSDT SSDT DBGP DBG2 POAT DMAR ASF! FPDT BGRT > UEFI > acpi0: wakeup devices GLAN(S4) XHC_(S3) XDCI(S4) HDAS(S4) RP01(S4) RP02(S4) > RP04(S4) RP05(S4) RP06(S4) RP07(S4) RP08(S4) RP09(S4) RP10(S4) RP11(S4) > RP12(S4) RP13(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 23999999 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i7-7600U CPU @ 2.80GHz, 2692.08 MHz, 06-8e-09, patch > 000000f6 > cpu0: cpuid 1 > edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > ecx=77fafbff<SSE3,PCLMUL,DTES64,MWAIT,DS- > CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND> > cpu0: cpuid 6 eax=27f7<SENSOR,ARAT,PTS> ecx=9<EFFFREQ> > cpu0: cpuid 7.0 > ebx=29c6fbf<FSGSBASE,TSC_ADJUST,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> > edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD> > cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 > cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES> > cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> > ecx=121<LAHF,ABM,3DNOWP> > cpu0: cpuid 80000007 edx=100<ITSC> > cpu0: msr 10a=a000c04<RSBA,MISC_PKG_CT,ENERGY_FILT,GDS_CTRL,RFDS_NO> > cpu0: MELTDOWN > cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB > 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 24MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Core(TM) i7-7600U CPU @ 2.80GHz, 2692.73 MHz, 06-8e-09, patch > 000000f6 > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 1 (application processor) > cpu2: Intel(R) Core(TM) i7-7600U CPU @ 2.80GHz, 2693.73 MHz, 06-8e-09, patch > 000000f6 > cpu2: smt 1, core 0, package 0 > cpu3 at mainbus0: apid 3 (application processor) > cpu3: Intel(R) Core(TM) i7-7600U CPU @ 2.80GHz, 2693.73 MHz, 06-8e-09, patch > 000000f6 > cpu3: smt 1, core 1, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins > acpimcfg0 at acpi0 > acpimcfg0: addr 0xf0000000, bus 0-127 > acpiec0 at acpi0 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 2 (RP01) > acpiprt2 at acpi0: bus -1 (RP02) > acpiprt3 at acpi0: bus 4 (RP03) > acpiprt4 at acpi0: bus -1 (RP04) > acpiprt5 at acpi0: bus 5 (RP05) > acpiprt6 at acpi0: bus -1 (RP06) > acpiprt7 at acpi0: bus -1 (RP07) > acpiprt8 at acpi0: bus -1 (RP08) > acpiprt9 at acpi0: bus 6 (RP09) > acpiprt10 at acpi0: bus -1 (RP10) > acpiprt11 at acpi0: bus -1 (RP11) > acpiprt12 at acpi0: bus -1 (RP12) > acpiprt13 at acpi0: bus -1 (RP13) > acpiprt14 at acpi0: bus -1 (RP14) > acpiprt15 at acpi0: bus -1 (RP15) > acpiprt16 at acpi0: bus -1 (RP16) > acpiprt17 at acpi0: bus -1 (RP17) > acpiprt18 at acpi0: bus -1 (RP18) > acpiprt19 at acpi0: bus -1 (RP19) > acpiprt20 at acpi0: bus -1 (RP20) > acpiprt21 at acpi0: bus -1 (RP21) > acpiprt22 at acpi0: bus -1 (RP22) > acpiprt23 at acpi0: bus -1 (RP23) > acpiprt24 at acpi0: bus -1 (RP24) > acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000 > acpithinkpad0 at acpi0: version 2.0 > acpiac0 at acpi0: AC unit online > acpibat0 at acpi0: BAT0 model "430" serial 9001 type LiP oem "LGC" > acpicmos0 at acpi0 > "LEN0071" at acpi0 not configured > "LEN0072" at acpi0 not configured > acpibtn0 at acpi0: SLPB(wakeup) > "PNP0C14" at acpi0 not configured > acpibtn1 at acpi0: LID_(wakeup) > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev > 0x10 > "USBC000" at acpi0 not configured > acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpipwrres0 at acpi0: PUBS, resource for XHC_ > acpipwrres1 at acpi0: WRST > acpipwrres2 at acpi0: WRST > acpitz0 at acpi0 > acpitz0: critical temperature is 128 degC > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD1F > cpu0: using VERW MDS workaround (except on vmm entry) > cpu0: Enhanced SpeedStep 2692 MHz: speeds: 2801, 2800, 2700, 2500, 2400, > 2200, 2000, 1800, 1600, 1500, 1300, 1100, 800, 700, 600, 400 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 7G Host" rev 0x02 > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 620" rev 0x02 > drm0 at inteldrm0 > inteldrm0: msi, KABYLAKE, gen 9 > "Intel Core GMM" rev 0x00 at pci0 dev 8 function 0 not configured > xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi, xHCI > 1.0 > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 > addr 1 > pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21 > "Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured > ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi > pci1 at ppb0 bus 2 > rtsx0 at pci1 dev 0 function 0 "Realtek RTS525A Card Reader" rev 0x01: msi > sdmmc0 at rtsx0: 4-bit, dma > ppb1 at pci0 dev 28 function 2 "Intel 100 Series PCIE" rev 0xf1: msi > pci2 at ppb1 bus 4 > iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless-AC 8265" rev 0x88, msi > ppb2 at pci0 dev 28 function 4 "Intel 100 Series PCIE" rev 0xf1: msi > pci3 at ppb2 bus 5 > nvme0 at pci3 dev 0 function 0 "Samsung SM981/PM981" rev 0x00: msix, NVMe 1.3 > nvme0: Samsung SSD 970 EVO Plus 2TB, firmware 4B2QEXM7, serial S6P1NS0W325871Y > scsibus1 at nvme0: 2 targets, initiator 0 > sd0 at scsibus1 targ 1 lun 0: <NVMe, Samsung SSD 970, 4B2Q> > sd0: 1907729MB, 512 bytes/sector, 3907029168 sectors > ppb3 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: msi > pci4 at ppb3 bus 6 > pcib0 at pci0 dev 31 function 0 "Intel 200 Series LPC" rev 0x21 > "Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured > azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x21: msi > azalia0: codecs: Conexant/0x2008, Intel/0x280b, using Conexant/0x2008 > audio0 at azalia0 > ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21: apic 2 > int 16 > iic0 at ichiic0 > em0 at pci0 dev 31 function 6 "Intel I219-LM" rev 0x21: msi, address > 54:e1:ad:74:2b:f1 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > wsmouse1 at pms0 mux 0 > pms0: Synaptics clickpad, firmware 8.2, 0x1e2a1 0x940300 0x31d840 0xf003a3 > 0x12e800 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > vmm0 at mainbus0: VMX/EPT > efifb at mainbus0 not configured > ugen0 at uhub0 port 7 "Intel Bluetooth" rev 2.00/0.10 addr 2 > uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics > Co.,Ltd. Integrated Camera" rev 2.00/0.06 addr 3 > video0 at uvideo0 > ugen1 at uhub0 port 9 "Validity Sensors product 0x0097" rev 2.00/1.64 addr 4 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> > sd1: 595758MB, 512 bytes/sector, 1220114047 sectors > root on sd1a (0eed1cb293bd91de.a) swap on sd1b dump on sd1b > inteldrm0: 2560x1440, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 > wsdisplay0: screen 1-5 added (std, vt100 emulation) > iwm0: hw rev 0x230, fw ver 36.ca7b901d.0, address a0:af:bd:19:30:ac > syncing disks... done > rebooting... > OpenBSD 7.8 (GENERIC.MP) #5: Fri Mar 13 06:06:19 MDT 2026 > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 17037717504 (16248MB) > avail mem = 16494510080 (15730MB) > random: good seed from bootblocks > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x5a6fc000 (62 entries) > bios0: vendor LENOVO version "N1MET77W (1.62 )" date 02/15/2024 > bios0: LENOVO 20HQS3MS00 > efi0 at bios0: UEFI 2.5 > efi0: Lenovo rev 0x1620 > acpi0 at bios0: ACPI 5.0 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SSDT TPM2 UEFI SSDT SSDT HPET APIC MCFG ECDT SSDT > BOOT BATB SSDT SSDT SSDT WSMT SSDT SSDT DBGP DBG2 POAT DMAR ASF! FPDT BGRT > UEFI > acpi0: wakeup devices GLAN(S4) XHC_(S3) XDCI(S4) HDAS(S4) RP01(S4) RP02(S4) > RP04(S4) RP05(S4) RP06(S4) RP07(S4) RP08(S4) RP09(S4) RP10(S4) RP11(S4) > RP12(S4) RP13(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 23999999 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i7-7600U CPU @ 2.80GHz, 2693.73 MHz, 06-8e-09, patch > 000000f6 > cpu0: cpuid 1 > edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > ecx=77fafbff<SSE3,PCLMUL,DTES64,MWAIT,DS- > CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND> > cpu0: cpuid 6 eax=27f7<SENSOR,ARAT,PTS> ecx=9<EFFFREQ> > cpu0: cpuid 7.0 > ebx=29c6fbf<FSGSBASE,TSC_ADJUST,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> > edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD> > cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 > cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES> > cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> > ecx=121<LAHF,ABM,3DNOWP> > cpu0: cpuid 80000007 edx=100<ITSC> > cpu0: msr 10a=a000c04<RSBA,MISC_PKG_CT,ENERGY_FILT,GDS_CTRL,RFDS_NO> > cpu0: MELTDOWN > cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB > 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 24MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Core(TM) i7-7600U CPU @ 2.80GHz, 2693.10 MHz, 06-8e-09, patch > 000000f6 > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 1 (application processor) > cpu2: Intel(R) Core(TM) i7-7600U CPU @ 2.80GHz, 2693.73 MHz, 06-8e-09, patch > 000000f6 > cpu2: smt 1, core 0, package 0 > cpu3 at mainbus0: apid 3 (application processor) > cpu3: Intel(R) Core(TM) i7-7600U CPU @ 2.80GHz, 2693.73 MHz, 06-8e-09, patch > 000000f6 > cpu3: smt 1, core 1, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins > acpimcfg0 at acpi0 > acpimcfg0: addr 0xf0000000, bus 0-127 > acpiec0 at acpi0 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 2 (RP01) > acpiprt2 at acpi0: bus -1 (RP02) > acpiprt3 at acpi0: bus 4 (RP03) > acpiprt4 at acpi0: bus -1 (RP04) > acpiprt5 at acpi0: bus 5 (RP05) > acpiprt6 at acpi0: bus -1 (RP06) > acpiprt7 at acpi0: bus -1 (RP07) > acpiprt8 at acpi0: bus -1 (RP08) > acpiprt9 at acpi0: bus 6 (RP09) > acpiprt10 at acpi0: bus -1 (RP10) > acpiprt11 at acpi0: bus -1 (RP11) > acpiprt12 at acpi0: bus -1 (RP12) > acpiprt13 at acpi0: bus -1 (RP13) > acpiprt14 at acpi0: bus -1 (RP14) > acpiprt15 at acpi0: bus -1 (RP15) > acpiprt16 at acpi0: bus -1 (RP16) > acpiprt17 at acpi0: bus -1 (RP17) > acpiprt18 at acpi0: bus -1 (RP18) > acpiprt19 at acpi0: bus -1 (RP19) > acpiprt20 at acpi0: bus -1 (RP20) > acpiprt21 at acpi0: bus -1 (RP21) > acpiprt22 at acpi0: bus -1 (RP22) > acpiprt23 at acpi0: bus -1 (RP23) > acpiprt24 at acpi0: bus -1 (RP24) > acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000 > acpithinkpad0 at acpi0: version 2.0 > acpiac0 at acpi0: AC unit online > acpibat0 at acpi0: BAT0 model "430" serial 9001 type LiP oem "LGC" > acpicmos0 at acpi0 > "LEN0071" at acpi0 not configured > "LEN0072" at acpi0 not configured > acpibtn0 at acpi0: SLPB(wakeup) > "PNP0C14" at acpi0 not configured > acpibtn1 at acpi0: LID_(wakeup) > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev > 0x10 > "USBC000" at acpi0 not configured > acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpipwrres0 at acpi0: PUBS, resource for XHC_ > acpipwrres1 at acpi0: WRST > acpipwrres2 at acpi0: WRST > acpitz0 at acpi0 > acpitz0: critical temperature is 128 degC > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD1F > cpu0: using VERW MDS workaround (except on vmm entry) > cpu0: Enhanced SpeedStep 2693 MHz: speeds: 2801, 2800, 2700, 2500, 2400, > 2200, 2000, 1800, 1600, 1500, 1300, 1100, 800, 700, 600, 400 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 7G Host" rev 0x02 > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 620" rev 0x02 > drm0 at inteldrm0 > inteldrm0: msi, KABYLAKE, gen 9 > "Intel Core GMM" rev 0x00 at pci0 dev 8 function 0 not configured > xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi, xHCI > 1.0 > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 > addr 1 > pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21 > "Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured > ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi > pci1 at ppb0 bus 2 > rtsx0 at pci1 dev 0 function 0 "Realtek RTS525A Card Reader" rev 0x01: msi > sdmmc0 at rtsx0: 4-bit, dma > ppb1 at pci0 dev 28 function 2 "Intel 100 Series PCIE" rev 0xf1: msi > pci2 at ppb1 bus 4 > iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless-AC 8265" rev 0x88, msi > ppb2 at pci0 dev 28 function 4 "Intel 100 Series PCIE" rev 0xf1: msi > pci3 at ppb2 bus 5 > nvme0 at pci3 dev 0 function 0 "Samsung SM981/PM981" rev 0x00: msix, NVMe 1.3 > nvme0: Samsung SSD 970 EVO Plus 2TB, firmware 4B2QEXM7, serial S6P1NS0W325871Y > scsibus1 at nvme0: 2 targets, initiator 0 > sd0 at scsibus1 targ 1 lun 0: <NVMe, Samsung SSD 970, 4B2Q> > sd0: 1907729MB, 512 bytes/sector, 3907029168 sectors > ppb3 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: msi > pci4 at ppb3 bus 6 > pcib0 at pci0 dev 31 function 0 "Intel 200 Series LPC" rev 0x21 > "Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured > azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x21: msi > azalia0: codecs: Conexant/0x2008, Intel/0x280b, using Conexant/0x2008 > audio0 at azalia0 > ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21: apic 2 > int 16 > iic0 at ichiic0 > em0 at pci0 dev 31 function 6 "Intel I219-LM" rev 0x21: msi, address > 54:e1:ad:74:2b:f1 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > wsmouse1 at pms0 mux 0 > pms0: Synaptics clickpad, firmware 8.2, 0x1e2a1 0x940300 0x31d840 0xf003a3 > 0x12e800 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > vmm0 at mainbus0: VMX/EPT > efifb at mainbus0 not configured > ugen0 at uhub0 port 7 "Intel Bluetooth" rev 2.00/0.10 addr 2 > uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics > Co.,Ltd. Integrated Camera" rev 2.00/0.06 addr 3 > video0 at uvideo0 > ugen1 at uhub0 port 9 "Validity Sensors product 0x0097" rev 2.00/1.64 addr 4 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> > sd1: 595758MB, 512 bytes/sector, 1220114047 sectors > root on sd1a (0eed1cb293bd91de.a) swap on sd1b dump on sd1b > inteldrm0: 2560x1440, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 > wsdisplay0: screen 1-5 added (std, vt100 emulation) > iwm0: hw rev 0x230, fw ver 36.ca7b901d.0, address a0:af:bd:19:30:ac > syncing disks... done > rebooting... > OpenBSD 7.8 (GENERIC.MP) #5: Fri Mar 13 06:06:19 MDT 2026 > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 17037717504 (16248MB) > avail mem = 16494522368 (15730MB) > random: good seed from bootblocks > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x5a6fc000 (62 entries) > bios0: vendor LENOVO version "N1MET77W (1.62 )" date 02/15/2024 > bios0: LENOVO 20HQS3MS00 > efi0 at bios0: UEFI 2.5 > efi0: Lenovo rev 0x1620 > acpi0 at bios0: ACPI 5.0 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SSDT TPM2 UEFI SSDT SSDT HPET APIC MCFG ECDT SSDT > BOOT BATB SSDT SSDT SSDT WSMT SSDT SSDT DBGP DBG2 POAT DMAR ASF! FPDT BGRT > UEFI > acpi0: wakeup devices GLAN(S4) XHC_(S3) XDCI(S4) HDAS(S4) RP01(S4) RP02(S4) > RP04(S4) RP05(S4) RP06(S4) RP07(S4) RP08(S4) RP09(S4) RP10(S4) RP11(S4) > RP12(S4) RP13(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 23999999 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i7-7600U CPU @ 2.80GHz, 2693.73 MHz, 06-8e-09, patch > 000000f6 > cpu0: cpuid 1 > edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > ecx=77fafbff<SSE3,PCLMUL,DTES64,MWAIT,DS- > CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND> > cpu0: cpuid 6 eax=27f7<SENSOR,ARAT,PTS> ecx=9<EFFFREQ> > cpu0: cpuid 7.0 > ebx=29c6fbf<FSGSBASE,TSC_ADJUST,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> > edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD> > cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 > cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES> > cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> > ecx=121<LAHF,ABM,3DNOWP> > cpu0: cpuid 80000007 edx=100<ITSC> > cpu0: msr 10a=a000c04<RSBA,MISC_PKG_CT,ENERGY_FILT,GDS_CTRL,RFDS_NO> > cpu0: MELTDOWN > cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB > 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 24MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Core(TM) i7-7600U CPU @ 2.80GHz, 2692.75 MHz, 06-8e-09, patch > 000000f6 > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 1 (application processor) > cpu2: Intel(R) Core(TM) i7-7600U CPU @ 2.80GHz, 2693.73 MHz, 06-8e-09, patch > 000000f6 > cpu2: smt 1, core 0, package 0 > cpu3 at mainbus0: apid 3 (application processor) > cpu3: Intel(R) Core(TM) i7-7600U CPU @ 2.80GHz, 2693.73 MHz, 06-8e-09, patch > 000000f6 > cpu3: smt 1, core 1, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins > acpimcfg0 at acpi0 > acpimcfg0: addr 0xf0000000, bus 0-127 > acpiec0 at acpi0 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 2 (RP01) > acpiprt2 at acpi0: bus -1 (RP02) > acpiprt3 at acpi0: bus 4 (RP03) > acpiprt4 at acpi0: bus -1 (RP04) > acpiprt5 at acpi0: bus 5 (RP05) > acpiprt6 at acpi0: bus -1 (RP06) > acpiprt7 at acpi0: bus -1 (RP07) > acpiprt8 at acpi0: bus -1 (RP08) > acpiprt9 at acpi0: bus 6 (RP09) > acpiprt10 at acpi0: bus -1 (RP10) > acpiprt11 at acpi0: bus -1 (RP11) > acpiprt12 at acpi0: bus -1 (RP12) > acpiprt13 at acpi0: bus -1 (RP13) > acpiprt14 at acpi0: bus -1 (RP14) > acpiprt15 at acpi0: bus -1 (RP15) > acpiprt16 at acpi0: bus -1 (RP16) > acpiprt17 at acpi0: bus -1 (RP17) > acpiprt18 at acpi0: bus -1 (RP18) > acpiprt19 at acpi0: bus -1 (RP19) > acpiprt20 at acpi0: bus -1 (RP20) > acpiprt21 at acpi0: bus -1 (RP21) > acpiprt22 at acpi0: bus -1 (RP22) > acpiprt23 at acpi0: bus -1 (RP23) > acpiprt24 at acpi0: bus -1 (RP24) > acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000 > acpithinkpad0 at acpi0: version 2.0 > acpiac0 at acpi0: AC unit online > acpibat0 at acpi0: BAT0 model "430" serial 9001 type LiP oem "LGC" > acpicmos0 at acpi0 > "LEN0071" at acpi0 not configured > "LEN0072" at acpi0 not configured > acpibtn0 at acpi0: SLPB(wakeup) > "PNP0C14" at acpi0 not configured > acpibtn1 at acpi0: LID_(wakeup) > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev > 0x10 > "USBC000" at acpi0 not configured > acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpipwrres0 at acpi0: PUBS, resource for XHC_ > acpipwrres1 at acpi0: WRST > acpipwrres2 at acpi0: WRST > acpitz0 at acpi0 > acpitz0: critical temperature is 128 degC > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD1F > cpu0: using VERW MDS workaround (except on vmm entry) > cpu0: Enhanced SpeedStep 2693 MHz: speeds: 2801, 2800, 2700, 2500, 2400, > 2200, 2000, 1800, 1600, 1500, 1300, 1100, 800, 700, 600, 400 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 7G Host" rev 0x02 > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 620" rev 0x02 > drm0 at inteldrm0 > inteldrm0: msi, KABYLAKE, gen 9 > "Intel Core GMM" rev 0x00 at pci0 dev 8 function 0 not configured > xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi, xHCI > 1.0 > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 > addr 1 > pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21 > "Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured > ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi > pci1 at ppb0 bus 2 > rtsx0 at pci1 dev 0 function 0 "Realtek RTS525A Card Reader" rev 0x01: msi > sdmmc0 at rtsx0: 4-bit, dma > ppb1 at pci0 dev 28 function 2 "Intel 100 Series PCIE" rev 0xf1: msi > pci2 at ppb1 bus 4 > iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless-AC 8265" rev 0x88, msi > ppb2 at pci0 dev 28 function 4 "Intel 100 Series PCIE" rev 0xf1: msi > pci3 at ppb2 bus 5 > nvme0 at pci3 dev 0 function 0 "Samsung SM981/PM981" rev 0x00: msix, NVMe 1.3 > nvme0: Samsung SSD 970 EVO Plus 2TB, firmware 4B2QEXM7, serial S6P1NS0W325871Y > scsibus1 at nvme0: 2 targets, initiator 0 > sd0 at scsibus1 targ 1 lun 0: <NVMe, Samsung SSD 970, 4B2Q> > sd0: 1907729MB, 512 bytes/sector, 3907029168 sectors > ppb3 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: msi > pci4 at ppb3 bus 6 > pcib0 at pci0 dev 31 function 0 "Intel 200 Series LPC" rev 0x21 > "Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured > azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x21: msi > azalia0: codecs: Conexant/0x2008, Intel/0x280b, using Conexant/0x2008 > audio0 at azalia0 > ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21: apic 2 > int 16 > iic0 at ichiic0 > em0 at pci0 dev 31 function 6 "Intel I219-LM" rev 0x21: msi, address > 54:e1:ad:74:2b:f1 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > wsmouse1 at pms0 mux 0 > pms0: Synaptics clickpad, firmware 8.2, 0x1e2a1 0x940300 0x31d840 0xf003a3 > 0x12e800 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > vmm0 at mainbus0: VMX/EPT > efifb at mainbus0 not configured > ugen0 at uhub0 port 7 "Intel Bluetooth" rev 2.00/0.10 addr 2 > uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics > Co.,Ltd. Integrated Camera" rev 2.00/0.06 addr 3 > video0 at uvideo0 > ugen1 at uhub0 port 9 "Validity Sensors product 0x0097" rev 2.00/1.64 addr 4 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> > sd1: 595758MB, 512 bytes/sector, 1220114047 sectors > root on sd1a (0eed1cb293bd91de.a) swap on sd1b dump on sd1b > inteldrm0: 2560x1440, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 > wsdisplay0: screen 1-5 added (std, vt100 emulation) > iwm0: hw rev 0x230, fw ver 36.ca7b901d.0, address a0:af:bc:18:30:ac >
