Hi bugs@,
I tried upgrading a 7.9 guest to 8.0-snapshot. Twice in a row,
identically, it won't boot. I have to restart the guest and it will come
back up as 7.9.
I had no issues upgrading to snapshot with 7.9 as the host, but on 7.8 I
have this issue.
Using drive 0, partition 3.
Loading......
probing: pc0 com0 mem[638K 766M a20=on]
disk: hd0+
>> OpenBSD/amd64 BOOT 3.68
upgrade detected: switching to /bsd.upgrade
|
com0: 115200 baud
switching console to com0
>> OpenBSD/amd64 BOOT 3.68
boot>
booting hd0a:/bsd.upgrade: 4383634+1856513+3892168+0+716800
[118+503808+355282]=0xb2d010
entry point at 0xffffffff81001000
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2026 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 8.0 (RAMDISK_CD) #69: Thu Oct 1 14:00:06 MDT 2026
[email protected]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 788504576 (751MB)
avail mem = 765349888 (729MB)
random: good seed from bootblocks
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf2220 (10 entries)
bios0: vendor SeaBIOS version "1.16.3p1-OpenBSD-vmm" date 01/01/2011
bios0: OpenBSD VMM
acpi at bios0 not configured
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Opteron(tm) Processor 4162 EE, 35.38 MHz, 10-08-01
cpu0: cpuid 1
edx=78ba97f<FPU,VME,DE,PSE,TSC,MSR,PAE,CX8,SEP,PGE,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2>
ecx=80802001<SSE3,CX16,POPCNT,HV>
cpu0: cpuid 80000001 edx=e7d3fbff<NXE,MMXX,FFXSR,PAGE1GB,LONG,3DNOW2,3DNOW>
ecx=837fb<LAHF,CMPLEG,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,NODEID>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: 64KB 64b/line 2-way D-cache, 64KB 64b/line 2-way I-cache
cpu0: 512KB 64b/line 16-way L2 cache
cpu0: AMD erratum 721 detected and fixed
pvbus0 at mainbus0: KVM, OpenBSD
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "OpenBSD VMM Host" rev 0x00
virtio0 at pci0 dev 1 function 0 "Qumranet Virtio 1.x RNG" rev 0x01
viornd0 at virtio0
virtio0: irq 3
virtio1 at pci0 dev 2 function 0 "Qumranet Virtio 1.x Network" rev 0x01
vio0 at virtio1: 1 queue, address 00:55:03:00:00:02
virtio1: irq 5
virtio2 at pci0 dev 3 function 0 "Qumranet Virtio 1.x Storage" rev 0x01
vioblk0 at virtio2
virtio2: irq 6
scsibus0 at vioblk0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <VirtIO, Block Device, >
sd0: 24576MB, 512 bytes/sector, 50331648 sectors
virtio3 at pci0 dev 4 function 0 "Qumranet Virtio 1.x SCSI" rev 0x01
vioscsi0 at virtio3: qsize 128
virtio3: irq 7
scsibus1 at vioscsi0: 1 targets
cd0 at scsibus1 targ 0 lun 0: <OpenBSD, VMM CD-ROM, 001> removable
virtio4 at pci0 dev 5 function 0 "OpenBSD VMM Control" rev 0x00
vmmci0 at virtio4
virtio4: irq 9
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns8250, no fifo
com0: console
enable mbufs in high memory
softraid0 at root
scsibus2 at softraid0: 256 targets
(hangs here)
Thank you!
-Slow Servers
