The Buildbot has detected a new failure on builder AMD64 FreeBSD15 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1238/builds/1748
Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: opsec-fbsd15 Build Reason: <unknown> Blamelist: Michael Droettboom <mdb...@gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 25, done. remote: Counting objects: 4% (1/25) remote: Counting objects: 8% (2/25) remote: Counting objects: 12% (3/25) remote: Counting objects: 16% (4/25) remote: Counting objects: 20% (5/25) remote: Counting objects: 24% (6/25) remote: Counting objects: 28% (7/25) remote: Counting objects: 32% (8/25) remote: Counting objects: 36% (9/25) remote: Counting objects: 40% (10/25) remote: Counting objects: 44% (11/25) remote: Counting objects: 48% (12/25) remote: Counting objects: 52% (13/25) remote: Counting objects: 56% (14/25) remote: Counting objects: 60% (15/25) remote: Counting objects: 64% (16/25) remote: Counting objects: 68% (17/25) remote: Counting objects: 72% (18/25) remote: Counting objects: 76% (19/25) remote: Counting objects: 80% (20/25) remote: Counting objects: 84% (21/25) remote: Counting objects: 88% (22/25) remote: Counting objects: 92% (23/25) remote: Counting objects: 96% (24/25) remote: Counting objects: 100% (25/25) remote: Counting objects: 100% (25/25), done. remote: Compressing objects: 7% (1/13) remote: Compressing objects: 15% (2/13) remote: Compressing objects: 23% (3/13) remote: Compressing objects: 30% (4/13) remote: Compressing objects: 38% (5/13) remote: Compressing objects: 46% (6/13) remote: Compressing objects: 53% (7/13) remote: Compressing objects: 61% (8/13) remote: Compressing objects: 69% (9/13) remote: Compressing objects: 76% (10/13) remote: Compressing objects: 84% (11/13) remote: Compressing objects: 92% (12/13) remote: Compressing objects: 100% (13/13) remote: Compressing objects: 100% (13/13), done. remote: Total 13 (delta 12), reused 1 (delta 0), pack-reused 0 >From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to '50369e6c34d05222e5a0ec9443a9f7b230e83112'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 50369e6c34 gh-116996: Add pystats about _Py_uop_analyse_and_optimize (GH-116997) Switched to and reset branch 'main' configure: WARNING: pkg-config is missing. Some dependencies may not be detected correctly. Test report =========== Failed tests: - test.test_multiprocessing_forkserver.test_processes Sincerely, -The Buildbot _______________________________________________ Buildbot-status mailing list -- buildbot-status@python.org To unsubscribe send an email to buildbot-status-le...@python.org https://mail.python.org/mailman3/lists/buildbot-status.python.org/ Member address: arch...@mail-archive.com