Gerry, I own and use a Keyspan USA-19HS (now Triplite) and it indeed is a great product, but it only has 9 pins whereas the original spec is a 15 pin connector (DB style). Without changing the model number, the parts inside the USA-19HS have changed a few times. They have great support for all common operating systems and update drivers as needed to cover Microsoft's flavor of the day.
http://www.lammertbies.nl/comm/cable/RS-232.html#pins has a good description of the protocol. Having said that, most stuff today can be configured for Xon Xoff and work with only 3 wires (Tx, Rx and ground). That's true for CAT control on our K3's and most modern radios. In fact Elecraft uses the other pins for non-RS-232 purposes. We need more info on the gizmo! Jon Sent from my iPad > On Aug 21, 2015, at 1:34 PM, gmuller885 via BVARC <bvarc@bvarc.org> wrote: > > Rob > The info i provided is a fully loaded rs232 to usb connection > > > > Sent from my Sprint Samsung Galaxy® Note 4. > > > -------- Original message -------- > From: Jon Noxon via BVARC <bvarc@bvarc.org> > Date: 8/21/2015 12:52 PM (GMT-06:00) > To: BRAZOS VALLEY AMATEUR RADIO CLUB <bvarc@bvarc.org> > Cc: Jon Noxon <j...@noxon.cc> > Subject: Re: [BVARC] Dumb question of the day > > Rob, > > You have received a lot of information but since no one else has brought it > up... > > RS-232 originally defined both levels and various signal pins. Most USB to > RS-232 converters do not have all of the other signals. They will have Tx and > Rx, but if your gizmo needs the other signals for flow control, such as > RTS/CTS, DTR etc, you may not get by with a USB-to-serial converter. > > Jon KF5TFJ > > Sent from my iPad > >> On Aug 21, 2015, at 9:12 AM, McClure, Rob K via BVARC <bvarc@bvarc.org> >> wrote: >> >> Hello all, >> >> I think I may have the dumb question of the day. >> >> Does anyone (or in the case of the BVARC brain trust) or everyone know if >> the RS232 to USB convertors are bidirectional? >> >> We have an issue at work where there is some sort of box/gadget/gizmo >> attached to one of our older servers via an RS232 (DB9?) cable. Needless to >> say, the server with this RS232 port is beyond end of life. Can I use a >> RS232 to USB setup to connect this gizmo to a new server using a USB port. >> >> On the slight chance that the site coordinator is wrong, and the RS232 is on >> the box/gadget/gizmo, that’s why I asked if these RS232 to USB convertors >> are bidirectional. >> >> Last, does anyone know a source in town for the RS232 to USB with the FTDI >> chipset here in town? >> >> Thanks in advance. >> >> Regards, >> >> Rob McClure >> IT Analyst >> Cameron >> >> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >> This email message is for the sole use of the intended recipient(s) and may >> contain confidential and privileged information of Cameron and its Operating >> Divisions. Any unauthorized use or disclosure is prohibited. If you are not >> the intended recipient, please contact the sender by reply email and delete >> and destroy all copies of the original message inclusive of any attachments. >> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >> >> _______________________________________________ >> BVARC mailing list >> BVARC@bvarc.org >> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > _______________________________________________ > BVARC mailing list > BVARC@bvarc.org > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
_______________________________________________ BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org