I gave up with Log4OM. But the other connection method works. Rigctrl .. both use
On Feb 19, 2025 11:18 AM, Allen Brier via BVARC <[email protected]> wrote:
This morning, I started have an issue with COM ports on my WIN 11 PC.
Both N1MM+ and LOGic will not recognize the built-in K4 com ports, while they are visible in WSJT-X and Device Manager. Not sure how this is possible but could use some assistance from anyone who may have some clue as to why this is happening. I did a reboot this morning (as requested by AVG) and the issue seemed to occur sometime after that. Not sure if the reboot is related. I also did additional reboots and restarts with no change. Any ideas would be appreciated.
TIA,
73/161,
Allen R. Brier N5XZ
1515 Windloch Lane
Richmond, TX 77406 USA
713-705-4801
________________________________________________ Brazos Valley Amateur Radio Club
BVARC mailing list [email protected] http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Publicly available archives are available here: https://www.mail-archive.com/[email protected]/
