Jan:
You are getting DHCP response and it is trying to get the boot
program (Defined by BootFile in DHCP macro). Can you check whether tftp
is working on your install server? Please do the following on the
install server.
# tftp
tftp> connect 10.16.22.13
tftp> get menu.lst.x86_global_108
If you see it not successful, the your tftp setup has issues.
- Sundar
Jan Hlodan wrote:
> Hello Mary,
>
> thanks for your interest!
> I'll check the BIOS and network driver tomorrow.
>
> Regards,
>
> Jan Hlodan
>
> mary ding wrote:
>> Jan:
>>
>> I did not have any problem with installing AI on the W2100Z. Can you
>> check whether the BIOS is the latest updated one.
>>
>> However, I did see this error on a dell450 and mpc375 machine. I need
>> to talk to boot team since this might be grub related. Stay tuned.
>>
>>
>>
>> mary ding wrote:
>>> Jan:
>>>
>>> Let me go and check this out on our W1100Z. BTW, is the W1100Z BIOS
>>> up to date ????
>>>
>>>
>>>
>>> Jan Hlodan wrote:
>>>> output:
>>>>
>>>> DHCP MAC ADDR: 00 04 76 8E B8 4C
>>>> CLIENT IP: 10.16.22.205
>>>> MASK: 255.255.255.0
>>>> DHCP IP: 10.16.22.13
>>>> GATEWAY IP: 10.16.22.1
>>>> TFTP.
>>>> PXE-TO2: Access violation
>>>> TFTP.
>>>> PXE-TO2: Access violation
>>>> PXE-TO2: TFTP Error - Access violation
>>>> Network boot aborted.
>>>>
>>>>
>>>>
>>>> Macro:
>>>>
>>>> sudo pntadm -P 10.16.22.0 | grep 10.16.22.205
>>>> 010004768EB84C 01 10.16.22.205 10.16.22.10
>>>> Forever 010004768EB84C jihlava
>>>>
>>>> sudo dhtadm -P | grep 010004768EB84C
>>>> 010004768EB84C Macro
>>>> :Subnet=255.255.255.0:Router=10.16.22.1:Broadcst=10.16.22.255:BootSrvA=10.16.22.13:BootFile=x86_global_108:GrubMenu=menu.lst.x86_global_108:Timeserv=10.16.22.13:LeaseTim=86400:LeaseNeg:DNSdmain=czech.sun.com:DNSserv=10.16.22.11:UTCoffst=3600:
>>>>
>>>>
>>>>
>>>> Any ideas?
>>>>
>>>> Thank you.
>>>>
>>>> Regards,
>>>>
>>>> Jan Hlodan
>>>>
>>>>
>>>>
>>>> On 03/10/09 20:07, Jan Hlodan wrote:
>>>>> Hello,
>>>>>
>>>>> It seems that the problem is with validating within the TFTP protocol
>>>>> when machine boots from net (via PXE protocol) and tries to get macro
>>>>> from DHCP server.
>>>>>
>>>>> It's just typical for Sun W1100z machine. All other x86 machines
>>>>> in our
>>>>> lab (more than 10) can validate TFTP and get macro.
>>>>> The macro is correct for 100%.
>>>>>
>>>>> Did anybody successfully install Sun W1100z?
>>>>>
>>>>> Thank you.
>>>>>
>>>>>
>>>>> Regards,
>>>>>
>>>>> Jan Hlodan
>>>>>
>>>>> _______________________________________________
>>>>> caiman-discuss mailing list
>>>>> caiman-discuss at opensolaris.org
>>>>> http://mail.opensolaris.org/mailman/listinfo/caiman-discuss
>>>>>
>>>> _______________________________________________
>>>> caiman-discuss mailing list
>>>> caiman-discuss at opensolaris.org
>>>> http://mail.opensolaris.org/mailman/listinfo/caiman-discuss
>>>
>>> _______________________________________________
>>> caiman-discuss mailing list
>>> caiman-discuss at opensolaris.org
>>> http://mail.opensolaris.org/mailman/listinfo/caiman-discuss
>>
> _______________________________________________
> caiman-discuss mailing list
> caiman-discuss at opensolaris.org
> http://mail.opensolaris.org/mailman/listinfo/caiman-discuss
