Hi,
Any one knows how to install OpenSolaris from remotely without Desktop
access.
We have setup the AI server for SPARC client and client downloaded the
ISO image from server.
Then it booted from memory and went into maintenance state.
Do we need to change/set any parameters in AI manifest?
Does CLI based installation support for OpenSolaris?
Below is the console output while booting up the SPARC client.
-------------------------------------------------------------------------------
{0} ok boot net:dhcp
SC Alert: Host System has Reset
Probing system devices
Probing memory
Probing I/O buses
screen not found.
keyboard not found.
Keyboard not present. Using ttya for input and output.
Probing system devices
Probing memory
Probing I/O buses
Sun Fire V445, No Keyboard
Copyright 2006 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.22.15, 4096 MB memory installed, Serial #68114676.
Ethernet address 0:14:4f:f:58:f4, Host ID: 840f58f4.
Rebooting with command: boot net:dhcp
Boot device: /pci at 1e,600000/pci at 0/pci at 1/pci at 0/network at 4:dhcp
File and args:
1000 Mbps FDX Link up
Timed out waiting for BOOTP/DHCP reply
1000 Mbps FDX Link up
<time unavailable> wanboot info: WAN boot messages->console
<time unavailable> wanboot info: Starting DHCP configuration
<time unavailable> wanboot info: DHCP configuration succeeded
<time unavailable> wanboot progress: wanbootfs: Read 366 of 366 kB (100%)
<time unavailable> wanboot info: wanbootfs: Download complete
Thu Mar 26 07:48:13 wanboot progress: miniroot: Read 171484 of 171484 kB
(100%)
Thu Mar 26 07:48:13 wanboot info: miniroot: Download complete
SunOS Release 5.11 Version snv_106 64-bit
Copyright 1983-2008 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
WARNING: i2c_0 failed to add interrupt.
WARNING: i2c_0 operating in POLL MODE only
Hardware watchdog enabled
Hostname: opensolaris
Remounting root read/write
Probing for device nodes ...
Preparing automated install image for use
Couldn't determine source of automated install image
Requesting System Maintenance Mode
(See /lib/svc/share/README for more information.)
Console login service(s) cannot run
Enter user name for system maintenance (control-d to bypass):
-------------------------------------------------------------------------------
Thanks,
Prakash
