Jason Zhao wrote:
>> I think this is the correct way to do it.
>>
>> What devalias command in OBP shows for 'disk' in your case ?
>>
>> e.g.
>> {16} ok devalias disk
>> disk /pci at 7c0/pci at 0/pci at 8/scsi at 2/disk at 0,0
>>
>> is it referred by the one of c1t0d0 or c1t1d0 reported by test_td ?
>>
>>
> {6} ok devalias disk
> disk /pci at 780/pci at 0/pci at 9/scsi at 0/disk at 0
>
> # format -e
> Searching for disks...done
>
>
> AVAILABLE DISK SELECTIONS:
> 0. c0t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
> /pci at 780/pci at 0/pci at 9/scsi at 0/sd at 0,0
> 1. c0t1d0 <FUJITSU-MAY2073RCSUN72G-0501-68.37GB>
> /pci at 780/pci at 0/pci at 9/scsi at 0/sd at 1,0
> Specify disk (enter its number):
>
> I think the "sd" is the "disk" in OBP, then it looks correct.
>
Looking at devalias, it seems it might be missing trailing ',0' -
/pci at 780/pci at 0/pci at 9/scsi at 0/disk at 0
->
/pci at 780/pci at 0/pci at 9/scsi at 0/disk at 0,0
If it doesn't help, could you please try if
setting boot device directly makes any difference ?
# eeprom boot-device=/pci at 780/pci at 0/pci at 9/scsi at 0/disk at 0,0
Thank you,
Jan
