On 01/14/10 11:17 AM, Fr?d?ric VANNI?RE wrote: > Hello, > > I managed to boot the installer from PXE with a configured console on the > virtual serial port. > > The working menu.lst for PXEGrub is : > > serial --unit=1 --speed=115200 --word=8 --parity=no --stop=1 > terminal --timeout=10 serial console > default=0 > timeout=3 > min_mem64=512 > title OpenSolaris Development snv_130 AI > kernel$ /solaris/osol-1003-130/platform/i86pc/kernel/$ISADIR/unix -B > aimanifest=prompt,console=ttyb,ttyb-mode='115200,8,n,1,-',livessh=enable > module$ /solaris/osol-1003-130/platform/i86pc/$ISADIR/boot_archive > > > > I've got the console output until the service > svc:/system/console-login:default is started and set the port speed of ttyb > to 9600 bps. > > On an installed system, the console speed is set up from grub (-B > console=...) or from eeprom (/boot/solaris/bootenv.rc) and also in > console-login manifest (/var/svc/manifest/system/console-login.xml) : > > <propval name='device' type='astring' value='/dev/console' /> > <!--<propval name='label' type='astring' value='console' /> --> > <propval name='label' type='astring' value='115200' /> > > It would be much better and cleaner is console-login get the serial port > speed from eeprom instead of the XML manifest. In the case of the remote > installation it would be a way to keep a console. >
I'd recommend filing a bug in the kernel/console category (bugs.opensolaris.org) to capture your request. Dave
