I have a working AI server installation and have successfully installed sun4u, sun4v and x86 boxes using this. However, trying to install on a domain on an SF6800, I get 'No disks found!'
I suspect this is because the drivers for the boot disks are not included/supported. Boot disks are a scsi-attached D240 (the standard boot device for a 6800), so they appear as ssd devices. OBP sees the disks, and Solaris 10u8 boots from them, so the disks are visible and good. Are these disks supported/going to be supported? Is there a current list of what is/is not supported - if it is on opensolaris.org, then I can't find it searching for things I could think of around this topic. The network devices on the cards in the IO module are all seen, but there are no ssd devices seen when system boots for AI install (b129). I also tried booting directly from the b130 AI sparc image, but this had all sorts of problems and came up in system maintenance mode. Is there a particular sequence for booting from the b130+ AI images directly? I haven't seen any info on this other than it is now possible. Cheers Frank
