Sundar,
Comments below.
Thanks.
-paul
On 09/18/09 19:24, sundar Yamunachari wrote:
> Paul Neary wrote:
>> I'm currently running AI in debug mode for the factory pre-install of
>> OpenSolaris.
>> Across 4 platforms the install works but I'm seeing different
>> messages in the install_log.
>> I'm not sure whether to ignore these as merely debug output or to be
>> genuinely worried.
>> Any help would be appreciated.
>> Comparison of messages attached.
>>
>> -paul;
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> caiman-discuss mailing list
>> caiman-discuss at opensolaris.org
>> http://mail.opensolaris.org/mailman/listinfo/caiman-discuss
> Paul,
>
> If you see an error message in the logs and installation is
> successful, please file a bug to track the issue. I will go over your
> failures.
> Failures across platforms (as see in debug output in install_log)
>
> 1)
> | "ict_transfer_logs Command /bin/cp /tmp/ai_sd_log
> /a/var/sadm/system/logs/ failed with 512"
> | "ict_transfer_logs Command /bin/cp
> /tmp/ai_combined_manifest.xml /a/var/sadm/system/logs/ failed with 512"
> | "Failed to transfer the log files"
> -------------------------------------------------------------------------------------------------------------------------------
>
> T5140 (Maramba) | yes
> T5120 (Huron) | yes
> T6320 (Glendale) | yes
> T5440 (Batoka) | yes
>
> Summary: Fails across all platforms.
> Was previously flagged as an issue (see link) but can't find a bug for this.
> http://kr.opensolaris.org/os/project/caiman/Bootable_AI_Image/%3Bjsessionid=FF55D3E1C62B889C4E195EAEB9965F2B
>
>
> AI failed to transfer two files. It looks like install_log is
> transferred. It is not a fatal error. Please file a bug
Will do.
> 2)
> | "ddm_check_for_svm(): failed"
> -----------------------------------------------------
> T5140 (Maramba) | no
> T5120 (Huron) | yes
> T6320 (Glendale) | no
> T5440 (Batoka) | yes
>
> Summary: Appears to be a normal debug message re. checking for pre-existing
> SVM volumes
>
>
> This is a debug message. There is a related bug for SVM and AI (6191).
>
>
I saw that.
> 3)
> | "<TDMG_W Sep 16 09:46:32> stderr:/dev/dsk/c3t0d0s1: I/O
> error"
> | "<TDMG_W Sep 16 09:46:32> Error adding swap, error = 2"
> ----------------------------------------------------------------------------------
>
> T5140 (Maramba) | No
> T5120 (Huron) | Yes
> T6320 (Glendale) | No
> T5440 (Batoka) | No
>
> Summary:
>
>
>
> How much memory on the system Huron? Can you attach the output of
> format for the disk c3t0d0?
>
prtdiag | grep -i mem
Memory size: 16256 Megabytes
swap -s
total: 427592k bytes allocated + 449080k reserved = 876672k used,
7862912k available
Format output below.
format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c3t0d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
/pci at 0/pci at 0/pci at 2/scsi at 0/sd at 0,0
1. c3t1d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
/pci at 0/pci at 0/pci at 2/scsi at 0/sd at 1,0
Specify disk (enter its number): 0
selecting c3t0d0
[disk formatted]
/dev/dsk/c3t0d0s0 is part of active ZFS pool rpool. Please see zpool(1M).
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit
format> p
PARTITION MENU:
0 - change `0' partition
1 - change `1' partition
2 - change `2' partition
3 - change `3' partition
4 - change `4' partition
5 - change `5' partition
6 - change `6' partition
7 - change `7' partition
select - select a predefined table
modify - modify a predefined partition table
name - name the current table
print - display the current table
label - write partition map and label to the disk
!<cmd> - execute <cmd>, then return
quit
partition> p
Current partition table (original):
Total disk cylinders available: 14087 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 413 - 1649 12.00GB (1237/0/0) 25175424
1 swap wu 0 - 412 4.01GB (413/0/0) 8405376
2 backup wm 0 - 14086 136.71GB (14087/0/0) 286698624
3 unassigned wm 1650 - 2886 12.00GB (1237/0/0) 25175424
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
partition>
Thanks
Paul
> Thanks,
> Sundar
> ------------------------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://mail.opensolaris.org/pipermail/caiman-discuss/attachments/20090921/f1553be3/attachment.html>
