I'm using the text installer on a V210 with OpenBoot v4.22.33 (latest
available) & B131. Install seems to go fine. The reboot after installation
fails with this error:
The file just loaded does not appear to be executable.
If I reboot off the CD & exit to the shell, I can import the rpool that was
built during the TTY install. I've tried this w/ 2 different disks.
Any ideas? The console sequence is included below.
TIA,
Matt
---------------------------------------------------------------------------------------------------------
{1} ok boot disk0
SC Alert: Host System has Reset
Probing system devices
Probing memory
Probing I/O buses
Sun Fire V210, No Keyboard
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.22.33, 5120 MB memory installed, Serial #54938117.
Ethernet address 0:3:ba:46:4a:5, Host ID: 83464a05.
Rebooting with command: boot disk0
Boot device: /pci at 1c,600000/scsi at 2/disk at 0,0 File and args:
The file just loaded does not appear to be executable.
{1} ok
--
This message posted from opensolaris.org
