Hello Mikael, It is amazing how quick and precise your analysis is. After I changed dtmfmode in sip.conf file, the problem has disappeared.
My dtmfmode was set to 'inband', due to T.38 fax support. To keep T.38 happy, I could still include exten => fax,n,SipDTMFMode(inband) into my RxFAX dialplan, I guess? Thank you very much for your help, Peter ______________________________________________________________ > Od: [EMAIL PROTECTED] > Komu: Users Mailing List - Non-Commercial > Discussion<[email protected]> > Datum: 13.06.2007 07:39 > Předmět: Re: [Callweaver-users] VoiceMailMain ignores > input,leadstovm_authenticate error > >ons, 13.06.2007 kl. 07.33 +0200, skrev Mikael Bjerkeland: >> Hi Peter, >> >> are you sure your DTMF mode is correct? Try rfc2833 >> >> >> ons, 13.06.2007 kl. 03.27 +0200, skrev [EMAIL PROTECTED]: >> > Hello, >> > >> > After a harddisk crash, I have re-installed callweaver on a new computer and >> > now I am experiencing strange error with VoiceMailMain(). >> > >> > Whenever I call extension 500, where my VoiceMailMain() resides, >> > it will play message correctly and then it asks for mailbox and password. >> > When I press these digits on my phone, it seems that Callweaver ignores them >> > and therefore does not allow me to log-in and listen to my voice mail messages. >> > >> > In previous (working) installation, callweaver recognized the mailbox numbers instantly and >> > it proceeded to password digits immediatelly. Now it waits until some timeout, >> > before it asks for password and then again it waits until a timeout. >> > >> > Here is relevant portion of my extensions.conf file: >> > >> > // ------------- extensions.conf start ------------------- >> > >> > exten => 500,1,VoiceMailMain() >> > >> > // ------------- extensions.conf end ------------------- >> > >> > And the whole voicemail.conf file: >> > >> > // ------------- voicemail.conf start ------------------- >> > [default] >> > 2 => 2222,John Doe ; ,[EMAIL PROTECTED],[EMAIL PROTECTED] >> > 3 => 3333,Jane Doe ; ,[EMAIL PROTECTED],[EMAIL PROTECTED] >> > // ------------- voicemail.conf end ------------------- >> > >> > And here is console output: >> > >> > -- Executing VoiceMailMain("SIP/john-3390", "") in new stack >> > -- Playing 'vm-login' (language 'en') >> > -- Playing 'vm-password' (language 'en') >> > -- Incorrect password '' for user 'john' (context = <any>) >> > -- Playing 'vm-incorrect-mailbox' (language 'en') >> > Jun 13 02:14:25 WARNING[3062676368]: app_voicemail.c:4888 vm_authenticate: Couldn't read username >> > >> > I must say, I did not expect any problems here, as I have restored my configuration from a backup. >> > >> > I have checked, that the file owner of voicemail.conf is callweaver:callweaver >> > with 640 permissions (rw-r----) and I am out of ideas now. >> > >> > Also, I can create a voicemail message successfully, but it ignores termination key '#', >> > (and most likely all other keys) so I have to hung up to finish recording. >> > >> > I am running callweaver-1.1.99.20070509 (the same version as before crash) >> > >> > Thank you for help >> > >> > Peter >> > >> > _______________________________________________ >> > Callweaver-users mailing list >> > [email protected] >> > http://lists.callweaver.org/mailman/listinfo/callweaver-users >> >> _______________________________________________ >> Callweaver-users mailing list >> [email protected] >> http://lists.callweaver.org/mailman/listinfo/callweaver-users > > >Hi Peter, > >are you sure your DTMF mode is correct? Try rfc2833 > >_______________________________________________ >Callweaver-users mailing list >[email protected] >http://lists.callweaver.org/mailman/listinfo/callweaver-users > _______________________________________________ Callweaver-users mailing list [email protected] http://lists.callweaver.org/mailman/listinfo/callweaver-users
