Hi,
I am trying to use TxFAX for fax send with latest snapshot but unable to
surpass this error. looks like some error in extensions.conf. I have
tried all possible combinations and commented/uncommented T38CALL=1 in
the call file but no progress. if i keep 's' in place of _1XXXXXXXXXX
but then get error like "Unable to start FAX". The fax machine rings
and shows receiveing but nothing after that.i am not sure where is the
error. i appreciate any suggestion.
i pasted error, extensions.conf and callfile for your perusal.
Thanks,
Vivek
Attempting call on SIP/[EMAIL PROTECTED] for [EMAIL PROTECTED]:1
(Retry 1)
Aug 11 13:27:14 NOTICE[3062160304]: channel.c:686
opbx_channel_perform_set_t38_status: Setting t38 status to 2 at
chan_sip.c:4770
Aug 11 13:27:35 NOTICE[3062160304]: channel.c:686
opbx_channel_perform_set_t38_status: Setting t38 status to 2 at
chan_sip.c:4770
> Channel SIP/gafachi-a7c3 was answered.
== Starting SIP/gafachi-a7c3 at faxout,18182761664,1 failed so falling
back to exten 's'
== Starting SIP/gafachi-a7c3 at faxout,s,1 still failed so falling
back to context 'default'
Aug 11 13:27:35 WARNING[3060300720]: pbx.c:2785 __opbx_pbx_run: Channel
'SIP/gafachi-a7c3' sent into invalid extension 's' in context 'default',
but no invalid handler
Aug 11 13:27:35 NOTICE[3060300720]: pbx_spool.c:279 attempt_thread: Call
completed to SIP/[EMAIL PROTECTED]
extensions.conf
[default]
exten => _1XXXXXXXXXX,1,Set(CALLERID(number)=21255551212
exten => _1XXXXXXXXXX,2,Dial,SIP/[EMAIL PROTECTED]
exten => _1XXXXXXXXXX,4,Hangup
exten => _1XXXXXXXXXX,1,Set(CALLERID(number)=2125551212)
exten => _1XXXXXXXXXX,2,Set(CALLERID(name)=)
exten => _1XXXXXXXXXX,3,Dial,SIP/[EMAIL PROTECTED]
exten => _1XXXXXXXXXX,4,Hangup
[faxout]
exten => 1XXXXXXXXXX,1,Set(LOCALSTATIONID=Navynet.it FAX)
exten => 1XXXXXXXXXX,2,Set(LOCALHEADERINFO=Navynet SRL offre soluzioni
VOIP per call center)
exten => 1XXXXXXXXXX,3,Set(FAXFILE=/root/fax_test.tif)
exten => 1XXXXXXXXXX,4,TxFAX(${FAXFILE}|caller|debug)
exten => 1XXXXXXXXXX,5,Hangup
;exten => s,5,TxFAX(${FAXFILE}|caller|ecm)
exten => h,1,NoOp(TX: REMOTESTATIONID faxout is ${REMOTESTATIONID})
exten => h,n,NoOp(TX: PHASEESTATUS faxout is ${PHASEESTATUS})
callfile
Channel: SIP/[EMAIL PROTECTED]
MaxRetries: 3
WaitTime: 30
; you can set variables here too!!
; Setting the file name is let as an exercise to the reader.
Set: LOCALSTATIONID=inxs2
Set: LOCALHEADERINFO=CallWeaver Fax with T38
;Please note.
;Setting the T38CALL channel variable before actually originating the
call,
;skips the RTP part and starts T38 negotiation directly. Don't use
unless
;you are dialing on a SIP channel.
; be aware that some gateway (cisco, for example) do not allow direct
T38 negotiation.
Set: T38CALL=1
;Fax detection and switchover should be done by the receving party.
Setting
;the following variable will enable CallWeaver to send the invite for
the initial switchover if
;a fax CNG is detected. (useless since trunk 2585)
;Set: T38TXDETECT=something
Context: faxout
Extension: 18182761664
;Extension: s
priority: 1
_______________________________________________
Callweaver-users mailing list
[email protected]
http://lists.callweaver.org/mailman/listinfo/callweaver-users
