Hello! Mhm - that's not very nice.
So everything is right till SVN-2932? So perhaps you can tell me, which svn command i had to use to download the full SVN-2932 and not the actual one? Stefan Checkov, Andrew schrieb: > Hello allied, > > Monday, September 10, 2007, 1:41:27 PM, you wrote: > > aigSP> Hello! > > aigSP> I'm not able to handle T38 Faxes with > aigSP> callweaver-RC-1.1.99.20070910 OR > aigSP> latest SVN - BUT RC4 works perfectly. > > aigSP> I get the following Error: > aigSP> rtp.c:978 opbx_rtp_read: RTP read error: Resource temporarily > unavailable > > aigSP> So there must be a big bug in it. > > I also has problem with T38 fax relay in latest SVNs and has opened a ticket > on > this issue > > Ticket #189: "problem with T38 with current SVN". > > In my case there is no T38 re-invite to ATA after getting T38 re-invite from > Cisco on outgoing call in the following config > > Linksys_2102->callweaver->Cisco_AS5400. > > In order to show that the problem is definitelly within CallWeaver > I made two sets of SIP and RTP traces with the same hardware configuration > except Callweaver version - all was fine with SVN-2932 and completelly > bad with latests SVNs. > > All traces are included to the ticket. > > Unfortunatelly there's absolutely no reaction on this ticket since Aug 21 > 2007... > > As for RC4 - as I remember is has very bad bug - some of paramaters > are not passed to Proc - probably second parameter dissapers. > > Andrew Checkov > _______________________________________________ Callweaver-users mailing list [email protected] http://lists.callweaver.org/mailman/listinfo/callweaver-users
