Hi Nasir,

I am not sure if this applicable in your case, however Gafachi does some ECM
at their end also, and they disable only on account basis. BTW we also use
Gafachi.

Thanks,

Vivek


On 9/23/07, Nasir Iqbal <[EMAIL PROTECTED]> wrote:
>
> Hi Vivek,
>
> On Sun, 2007-09-23 at 19:41 -0700, Vivek Shrivastava wrote:
> > Hey Nasir,
> >
> > Have you tried disabling the ECM? You might need to request gafachi
>
> I have tried with both with ECM and without ECM.
> but same problem.
>
>
> >  for disabling the ECM from there side too.
> >
> > Thanks,
> >
> > Vivek
> >
> >
> > On 9/23/07, Nasir Iqbal <[EMAIL PROTECTED]> wrote:
> >         Hi,
> >
> >         I upgraded my callweaver with lestest spandsp-0.0.4pre9.tgz
> >         and
> >         callweaver-RC-1.1.99.20070923 but same error.
> >
> >         I have captured tcp traffic for gafachi, Please find logs from
> >         following links
> >
> >         http://www.taibapress.com/call/dump/callweaver_cli.txt
> >
> >         http://www.taibapress.com/call/dump/tcpdump.txt
> >
> >
> >         Thanks
> >         Nasir Iqbal
> >         http://www.ictinnovations.com
> >
> >         On Sat, 2007-09-22 at 10:41 +0200, CtRiX wrote:
> >         > Nasir Iqbal wrote:
> >         > > by seeing sip messages I found the following three type of
> >         errors.
> >         > >
> >         > > 1. gafachi send T38 re-invite before answer (here our
> >         Callweaver reject
> >         > > this invite with "Loop Detected")
> >         > >
> >         > > 2. No T38 re-invite at all
> >         > >
> >         > > 3. SIP and T38 re-invite is ok. but after starting udptl
> >         call droped
> >         > > with error
> >         > >
> >         >
> >         > Read this page:
> >         > http://www.callweaver.org/wiki/Faxing+With+CallWeaver
> >         >
> >         > At the end there is the the troubleshooting guide and what
> >         logs we need
> >         > to do some analisys.
> >         > Provide logs as requested there, please.
> >         >
> >         > More, if you say there are 3 types of errors, provide logs
> >         for all of them.
> >         >
> >         > Max
> >         >
> >         > P.S.: gafachi works with CW.
> >         >
> >
> >         _______________________________________________
> >         Callweaver-users mailing list
> >         [email protected]
> >         http://lists.callweaver.org/mailman/listinfo/callweaver-users
> >
>
> _______________________________________________
> Callweaver-users mailing list
> [email protected]
> http://lists.callweaver.org/mailman/listinfo/callweaver-users
>
_______________________________________________
Callweaver-users mailing list
[email protected]
http://lists.callweaver.org/mailman/listinfo/callweaver-users

Reply via email to