Hi again,
given that nobody seems to have experienced the problem I described in
my mail last year:
Does anybody successfully use finarea SIP services, and could send me
the details of his configuration, i.e. preferably for voip-stunt? I am
still experiencing the problem that the connection indicates "one-sided
shutdown" of the connection. (See below.)
Many thanks,
Arik
Arik Raffael Funke wrote:
> Hi,
>
> thanks to everybody's help on the list I managed to get callweaver work
> now for my configuration - at least as well as my asterisk was running
> before.
>
> I have a problem that has been bothering me for the last year or so and
> which I was hoping would disappear with callweaver. I have absolutely no
> idea where it could come from:
>
> Situation:
> ==========
> I dial out via an internal ISDN phone connected to a HFC-S ISDN card
> running in NT mode with chan_misdn. To dial out I use SIP (i.e. in my
> case voipstunt).
>
> The SIP connection is established without any problems, the remote
> station rings, etc - EXCEPT after about 3 ring tones or so, the
> indication on my side changes from ringing to busy. Oddly enough, the
> phone on the remote site continues ringing, can still be picked up and
> if I speak into the phone on my side (which is giving busy) the remote
> side can hear me.
>
> To me this looked at first glance like some time-out had gone awry but I
> could not find anything in my configuration that would explain the
> phenomenon.
>
> I have tried everything to debug this on asterisk but I have run out of
> ideas. My configuration used to work about 30 months ago but then
> developed this ailment without any changes to my system that I am aware of.
>
>
> CLI output
> ==========
> 1. Following is the message I get with callweaver -dddddvvvvvgc when
> ringing starts after the connection is established:
> ------------
> -- Executing Dial("mISDN/1-u5", SIP/[EMAIL PROTECTED])
> -- Called [EMAIL PROTECTED]
> -- SIP/voipstunt-d73c is making progress passing it to mISDN/1-u5
> Error opening Tracefile: [ /var/log/callweaver.org/misdn.log ] No such
> file or directory
> -- SIP/voipstunt-d73c is making progress passing it to mISDN/1-u5
>
> 2. When the the ringing indication changes to busy absolutely nothing
> appears in the CLI even at ridiculously high debug and verbosity level
> settings (i.e. 100)
>
> 3. When the remote phone is answered, the following message appears as
> expected suggesting nothing is wrong. But at this time, my side of the
> connection may already give me a busy indication. (If I waited long
> enough before picking up the remote side.)
> ----------------
> -- SIP/voipstunt-d73c answered mISDN/1-u5
>
>
> Can anybody give me any hints/help on how to debug this?
>
> Many thanks,
> Arik
_______________________________________________
Callweaver-users mailing list
[email protected]
http://lists.callweaver.org/mailman/listinfo/callweaver-users
