Thanks you for your help but now it is ok. For callweaver 1.20-RC5 released use only spandsp0.0.4pre15.
CallWeaver 1.2.0-RC5 released! Posted by Roy Sigurd Karlsbakk on Nov 26 2007 CallWeaver 1.2.0-RC5 is now released an can be found at http://devs.callweaver.org/release/callweaver-1.2.0-rc5.tar.gz or http://devs.callweaver.org/release/callweaver-1.2.0-rc5.tar.bz2. Some known bugs still exist, but the new code now allows for all three modes of T.38 (Gateway, Endpoint and Passthrough) quite stably with most hardware. RC5 requires the latest spandsp library, currently 0.0.4pre15 available from http://www.soft-switch.org/downloads/spandsp/. Grab a copy and join in! Cordially, hermann KANGA ________________________________ De : Michael <[email protected]> À : yao marius hemann kanga <[email protected]> Cc : Users Mailing List - Non-Commercial Discussion <[email protected]> Envoyé le : Jeudi, 16 Avril 2009, 11h50mn 15s Objet : Re: [Callweaver-users] callweaver installation problem On Thu, 16 Apr 2009 22:42:41 you wrote: > thanks for your reply. > I use spandsp-0.0.5pre4.tgz and I do not use vale but when I try to build > callweaver I find this errors which is different for the previous error; > > /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -include > ../include/confdefs.h -I. -I../include -fomit-frame-pointer -D_REENTRANT > -Wall -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations > -DTEMP_STORE=2 -DTHREADSAFE=1 -DSQLITE_OMIT_CURSOR -DNO_TCL [snip] Well you are also using CentOS, which quite frankly is a POS. Use another Linux. Slackware is my personal favorite. I can vouch this works.
_______________________________________________ Callweaver-users mailing list [email protected] http://lists.callweaver.org/mailman/listinfo/callweaver-users
