Max Alex schrieb:
> Hi,
> I have working callweaver latest one with zap device.
> I have issue with fax transmission with Linksys ATA which is directly
> registered to one of the sip user of callweaver.
> I am trying to send the fax with my Digium, Inc. Wildcard TE122
> single-span T1/E1/J1 card to outbound fax.
> It is working fine in sending and receiving with other providers,But i
> have only issue with outbound to ATA .
> I am not able to send the fax through ATA to callweaver and then outbound
>
> Please find inline details of system
> Callweaver 1.2.1
> Zap device: Digium, Inc. Wildcard TE122 single-span T1/E1/J1 card to
> outbound fax.
>
> Sip user 1011
> [1011]
> type=friend
> username=1011
> secret=1011
> host=dynamic
> context=from-ata
> nat=yes
> disallow=all
> allow=ulaw
> allow=alaw
> canreinvite=yes
> dtmfmode=rfc2833
> t38udptlsupport=yes
Do you have enabled this in the global section of sip.conf ?
AFAIK this option does not work in this section.
sip show settings ?
regards
Hans
>
> Dialplan:
> [from-ata]
> exten => _X.,1,T38Gateway(Zap/G0/${EXTEN})
> exten => _X.,n,NoOp(${FAXPAGES})
> exten => _X.,n,Hangup()
>
> I am getting below lines when i am sending fax from ATA. And ATA has
> alreay t38 enabled.
> Below lines are continuously coming while the channels are active.
> Aug 11 11:10:43 DEBUG[3060243344]: app_t38gateway.c:160
> cw_bridge_frames: channels are muted.
>
> Can any one help me regarding this!!
> Thanks in advance!!
>
> Thanks,
> Max Alex
> Voip Developer
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Callweaver-users mailing list
> [email protected]
> http://lists.callweaver.org/mailman/listinfo/callweaver-users
_______________________________________________
Callweaver-users mailing list
[email protected]
http://lists.callweaver.org/mailman/listinfo/callweaver-users
