FYI, I don't see any difference on 15.0.2. But I discovered something today.
I updated a single 900 450i sector from 14.2.1 to 15.0.2. It's timed with a PacketFlux SyncBox which is timing/aux port sync. autoSyncStatus returns 2 which is timing port only. So that makes sense. This didn't change from 14.1.2 to 14.2.1 to 15.0.2. Then I have a 4x90 5GHz 450i cluster at the NOC, also updated from 14.2.1 to 15.0.2 today. These are fed by a PacketFlux GigE PowerInjector+Sync. GPS status page says receiving sync, power port sync pulse present. No other sources. But autoSyncStatus still returns 0 which is supposed to mean no sync. I went back and looked at my graphs and this definitely did work on 14.1.2 which showed a value of 4 (power port only). On 12/19/2016 8:53 AM, George Skorup wrote: > .1.3.6.1.4.1.161.19.3.1.3.18(.0) works fine on a regular 450 AP and > always returns zero on a 450i AP. Previously worked on either type on > 14.1.2. > > I updated a 450i cluster last week and immediately got alarms. Panic. > Oh, OK, it's fine, but this is broke. Whew. > _______________________________________________ > Cambium-users mailing list > Cambium-users@wispa.org > http://lists.wispa.org/mailman/listinfo/cambium-users _______________________________________________ Cambium-users mailing list Cambium-users@wispa.org http://lists.wispa.org/mailman/listinfo/cambium-users