You can wire the UGPS to the AUX ports on the 450m. Just a RJ45 to RJ12
adapter cable. It's in the user guide. Search the community site. Pretty
sure Matt posted it there.
And to be completely honest, I would just use a PacketFlux SyncBox
Junior Aux port version. The SyncPipe/SyncBox's have always been CMM3
aligned timing.
I believe the UGPS is CMM4 aligned. There is a slight difference. I've
always used PacketFlux for timing, so I can't say if you'll see any sync
issues.
On 1/19/2017 12:27 PM, Christian Palecek wrote:
Hello,
We are getting ready to deploy the 450M AP’s we received. We have
UGPS units for the timing, 1096H.
We have several 450/450i’s on all the towers we would be deploying at
and they are timed with packet flux sync injectors.
First question I have is how do I go about connecting the UGPS to the
PMP450M which has an aux and not a timing port, or maybe it is the
equivalent.
The other question I have is whether this will successfully
synchronize with the AP’s on the packet flux injectors. I won’t be
doing any frequency reuse on the PMP450M quite yet, but there will be
adjacent channels with no guard band.
Thanks,
Christian Palecek
Chief Operations Officer
Cybernet1 Inc.
Hamilton, MT
_______________________________________________
Cambium-users mailing list
Cambium-users@wispa.org
http://lists.wispa.org/mailman/listinfo/cambium-users
_______________________________________________
Cambium-users mailing list
Cambium-users@wispa.org
http://lists.wispa.org/mailman/listinfo/cambium-users
