Mack, David formulated on Monday :
> Andrew Dyke wrote:
>
>> While I am at it, a drive belt went on the domestic
>> alternator the other day, fortunately I had a spare. I now
>> need to replace the spare. The local Halfords was less than
>> helpful so I thought I would try the WWW, without much
>> success. The following is written on the old belt:- optibelt
>> - VB s=cplus A 1350 Ld / 13 X 1320 Li A 52
>
> Sounds like a standard A section V-belt ref A52 (i.e 52 inches). The
> 1350 and 1320 references refer to the pitch length and inside length (in
> mm). A replacement belt should be obtainable from your local
> engineering supplier (look for v belts in the yellow pages) or online
> e.g. http://www.bearingboys.co.uk/A52_V_Belt-130-p
>
Or even Lucas at a push
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/canals-list/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/canals-list/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[email protected]
mailto:[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
