Hi Wan If you do a subversion update of your CASPER library repository there should now be links to the documentation for these blocks. Use the 'Help' button on the mask dialog box to get this.
Cheers Andrew 2008/10/31 <wan.ch...@csiro.au> > HI Andrew: > > Thank you for your answer. Now I have better idea on how the libraries are > organized. What I am do is to setup the simulink simulation. Do you know the > difference among several FFT module provided in the casper library? > > They are : > > fft_biplex_real_2x > fft_biplex_real_4x > fft > fft_wideband_real > > And by the way, what are the function for the shift and sync pin? > > Thanks > > Wan > > ------------------------------ > *From:* Andrew Martens [mailto:martens.and...@gmail.com] > *Sent:* Thursday, 30 October 2008 6:11 PM > *To:* Cheng, Wan (ATNF, Marsfield) > *Cc:* laura.spit...@gmail.com; casper@lists.berkeley.edu > > *Subject:* Re: [casper] Casper 10.1 library issue > > Hi Wan > > Matlab scripts generate and modify an EDK project containing the HDL code > for the ADC. gen_xps_files.m (in xps_library directory) does most of the > work (look from line 246 or so) of copying a base EDK project (in xps_lib > directory) and then modifying it based on what your Simulink design > contains. There are different base EDK projects for each hardware platform. > The base EDK project contains the HDL relevant to the ADC (in > pcores/adc_interface_*) and the Matlab script modifes other files > (system.mhs, system.mss, data/system.ucf etc) to ensure the ADC related > infrastructure is included in the final EDK project. This is not a very > simple process and I am not sure where you want to jump in. > > Regards > Andrew > > 2008/10/30 <wan.ch...@csiro.au> > >> HI Laura: >> >> Thanks for your help. You are right. If I set more samples per period, it >> is more difficult for me to find the difference. I setup the sine wave >> according your setting, the difference is obvious. >> >> I think you explanation for the ADC internal structure is correct. The >> extra delay in O1 is for alignment. But I still have one more question: >> >> How the ADC module is linked to the HDL code in the library? Some low >> level function, such as convert the DDR data into single sample edge data, >> rebuffer the ADC clock, is done by HDL code. But I can not see how these HDL >> files are included into the design flow. Do you have any idea? >> >> Thanks >> >> Wan >> >> ------------------------------ >> *From:* Laura Spitler [mailto:laura.spit...@gmail.com] >> *Sent:* Thursday, 30 October 2008 1:48 AM >> >> *To:* Cheng, Wan (ATNF, Marsfield) >> *Cc:* casper@lists.berkeley.edu >> *Subject:* Re: [casper] Casper 10.1 library issue >> >> Hi Wan, >> >> That is strange. I made a model that looks identical to your AC_test using >> 10.1, and the output looks correct. >> Here are the parameters I'm using for the 'Sine Wave' block: >> Sine type : Sample based >> Amplitude: 1 >> Bias: 0 >> Samples per period: 10 >> Number of offset samples: 0 >> Sample time: 1/8 >> >> The sample time of the ADC block should be 1. >> >> The ADC block uses 4 or 8 downsample blocks for interleave off and on >> respectively to mimic the parallel output of the ADC, which is why you have >> to set sample time to either 1/4 or 1/8. The line with the delay block set >> to 2 rather than 1 is connected to the downsample block with offset sample = >> 0. My guess is the latency through the downsample block for the o0 sample is >> zero, so to keep it aligned with o1-o7, it needs an extra delay. If I'm >> wrong, someone correct me. In any case I don't think this is your trouble. >> >> If you're still having trouble, feel free to email me your model and I'll >> take a look at it. >> >> Good luck, >> Laura >> >> On Tue, Oct 28, 2008 at 10:37 PM, <wan.ch...@csiro.au> wrote: >> >>> Hi Laura: >>> >>> When I set the sample time of sine wave to 1/8, all outputs are still >>> same. I look at the subsystem of ADC module, and I find, except O1 has 1 >>> more cycle delay, all other channel have same function. I am not sure how >>> the ADC is implement. Do you have any idea? >>> >>> Thanks >>> >>> Wan >>> >>> ------------------------------ >>> *From:* Laura Spitler [mailto:laura.spit...@gmail.com] >>> *Sent:* Wednesday, 29 October 2008 12:15 PM >>> *To:* Cheng, Wan (ATNF, Marsfield) >>> *Cc:* casper@lists.berkeley.edu >>> *Subject:* Re: [casper] Casper 10.1 library issue >>> >>> Hi Wan, >>> In the Simulink 'Sine Wave' block, do you have your sample time set to >>> 1/8 or 1? Similarly if you turn interleave off, the sample time should be >>> 1/4. >>> >>> Best, >>> Laura >>> >>> >>> On Tue, Oct 28, 2008 at 8:59 PM, <wan.ch...@csiro.au> wrote: >>> >>>> Hi All: >>>> >>>> I just set a simple ADC module in simulink and check the ADC output. But >>>> the issue is that all eight outputs have same output data. This is >>>> different >>>> with showed in manual. From manual, these output should generate 8 sequence >>>> sampling. But as I know, they seems same. For details, please see the >>>> attached. >>>> >>>> Any idea? >>>> >>>> Thanks >>>> >>>> Wan >>>> >>> >>> >> >
