hi shilpa,
if you look on your NIC card, you can see if it's got
the op-amp and associated circuitry to detect a
cable that needs power and then send power to it.
it should be right next to the CX4 connector.
or you could call or email myricom and ask them
if their cards supply DC power through the connector.
best wishes,
dan
On 5/19/2010 7:39 PM, John Ford wrote:
hi shilpa,
the early CX4 10Gbe spec didn't supply optional power
through the connector, and the first revision bee2's and
ibob's we built didn't have powered connectors.
but the spec changed several years ago, so i would have
guessed that any modern NIC board would have powered
connectors. do you have a really old NIC?
No, these are pcie Myricom NIC's, some of them just purchased in September.
Shilpa told me the optical converters don't work with the Fujitsu xg-700
either. Just with the Bee2. Odd.
John
best wishes,
dan
On 5/19/2010 1:19 PM, Shilpa Bollineni wrote:
Hi All,
I'm trying to use a optical transceiver to adapt CX4 to optical fiber:
Fujitsu FPD-010R008-0E + FOC-CCxxxx. I'm using it for a short distance
of
10m. I did the loop back test on BEE2 and it works fine. So I'm sure
that the cable and the module is working fine. But when I have one end
of
the cable connected to the 10Gbe NIC card on the system I don't see the
module getting any power from the NIC card. Does anyone know any
specific
10Gbe NIC card that would work with these modules?
Any suggestions?
Thanks
Shilpa Bollineni
