Hi Henry, Thanks for your e-mail. My problem is that the latest version of tcpborphserver is not coming up automatically on boot-up. I do not have /etc/init.d/tcpborphserver.
I compiled the kernel myself. I am using my own filesystem, but it is the same filesystem as I was using before I upgraded the kernel. I did not customize startup to point to /borph when I compiled the kernel. How can I do this? I am using the 2.6.25-svn3327 kernel. I linked to the latest tcpborphserver and sym linked to it in /usr/local/sbin/ as Jason recommended. o...@roach1:~$ ls -lart /usr/local/sbin total 272 drwxrwsr-x 10 root staff 4096 Jan 22 2009 .. -rwxr-xr-x 1 root staff 266102 Oct 4 17:49 tcpborphserver2-2010-08-27-r3304-signfix lrwxrwxrwx 1 root staff 56 Oct 4 17:50 tcpborphserver2 -> /usr/local/sbin/tcpborphserver2-2010-08-27-r3304-signfix drwxrwsr-x 2 root staff 4096 Oct 4 17:50 . o...@roach1:~$ Thank you, Melissa > -----Original Message----- > From: Henry Chen [mailto:hche...@ssl.berkeley.edu] > Sent: Tuesday, September 28, 2010 11:11 AM > To: Soriano, Melissa (335J) > Cc: Wang, Duo (335J); casper@lists.berkeley.edu > Subject: Re: [casper] tcpborphserver version, ?wordwrite always returns > zero > > Hi Melissa, > > I've been playing around a bit with the new -signfix version of > tcpborphserver. The patch works for me if I do > > /etc/init.d/tcpborphserver stop > > then replace tcpborphserver2 in /usr/local/sbin and reboot. Then > the new version of the server comes up properly at boot. Did you > have customized startup to point to /borph when you compiled the > kernel? > > Thanks, > Henry > > On 9/28/2010 9:24 AM, Soriano, Melissa (335J) wrote: > > Dear Jason, > > > > Thank you for the LatestVersions wiki page. > > > >> The latest binary in SVN is from 2009 > >> > (http://casper.berkeley.edu/svn/trunk/roach/sw/binaries/linux/uImage- > >> jiffy-20091110). Did you recompile the kernel yourself? > > > > Yes, I checked out the roach/sw/linux directory and recompiled the > kernel myself. I needed the kernel source to compile my kernel modules > against. > > > > o...@roach1:~$ uname -a > > Linux roach1 2.6.25-svn3327 #2 Tue Sep 28 09:05:39 PDT 2010 ppc > GNU/Linux > > > >>> We are using tcpborphserver 0.2110. Is this the latest version? > >> No, latest version is > >> > http://casper.berkeley.edu/svn/trunk/roach/sw/binaries/tcpborphserver/t > >> cpborphserver2-2010-08-27-r3304-signfix > >> You could try that one. I don't have any problems using other > commands > >> or running tut2 (the 10GbE tutorial) using the recommended > versions... > > > > I picked up the version above and copied it to the /borph directory, > then rebooted the board. However, when I look at the process list, I > don't see tcpborphserver.. > > > > o...@roach1:~$ ps -ef > > UID PID PPID C STIME TTY TIME CMD > > root 1 0 2 16:20 ? 00:00:00 init [2] > > root 2 0 0 16:20 ? 00:00:00 [kthreadd] > > root 3 2 0 16:20 ? 00:00:00 [ksoftirqd/0] > > root 4 2 0 16:20 ? 00:00:00 [events/0] > > root 5 2 0 16:20 ? 00:00:00 [khelper] > > root 48 2 0 16:20 ? 00:00:00 [kblockd/0] > > root 58 2 0 16:20 ? 00:00:00 [khubd] > > root 65 2 0 16:20 ? 00:00:00 [kmmcd] > > root 85 2 0 16:20 ? 00:00:00 [bkexecd] > > root 86 2 0 16:20 ? 00:00:00 [pdflush] > > root 87 2 0 16:20 ? 00:00:00 [pdflush] > > root 88 2 0 16:20 ? 00:00:00 [kswapd0] > > root 89 2 0 16:20 ? 00:00:00 [aio/0] > > root 123 2 0 16:20 ? 00:00:00 [mtdblockd] > > root 161 2 0 16:20 ? 00:00:00 [krmond] > > root 167 2 0 16:20 ? 00:00:00 [rpciod/0] > > daemon 387 1 0 16:21 ? 00:00:00 /sbin/portmap > > statd 394 1 0 16:21 ? 00:00:00 /sbin/rpc.statd > > root 402 2 0 16:21 ? 00:00:00 [lockd] > > root 496 1 0 16:21 ? 00:00:00 /sbin/syslogd > > root 505 1 0 16:21 ? 00:00:00 /sbin/klogd -x > > root 532 1 0 16:21 ? 00:00:00 /usr/sbin/inetd > > ntp 545 1 0 16:21 ? 00:00:00 /usr/sbin/ntpd -p > /var/run/ntpd.pid -u 100:102 -g > > root 567 1 0 16:21 ? 00:00:00 /usr/sbin/cron > > root 626 1 0 16:21 ttyS0 00:00:00 /sbin/getty -L ttyS0 > 115200 vt100 > > telnetd 627 532 1 16:21 ? 00:00:00 in.telnetd: psdg5.lab > > root 629 627 2 16:21 pts/0 00:00:00 login -h psdg5.lab -p > > ops 630 629 1 16:21 pts/0 00:00:00 -sh > > ops 634 630 0 16:21 pts/0 00:00:00 ps -ef > > > > o...@roach1:~$ ls -lart /borph > > total 1108 > > -rwxr-xr-x 1 root root 33 Jul 16 2009 rc > > -rwxr-xr-x 1 root root 577036 Jul 17 2009 tcpborphserver.orig > > drwxr-xr-x 29 root root 4096 Aug 3 04:12 .. > > -rwxr--r-- 1 root root 266102 Sep 28 16:19 tcpborphserver2-2010-08- > 27-r3304-signfix > > drwxr-xr-x 2 root root 4096 Sep 28 16:19 . > > -rwxr-xr-x 1 root root 266102 Sep 28 16:20 tcpborphserver > > > > Why would tcpborphserver fail to launch on start-up? > > > > Thank you for your help. > > > > Regards, > > Melissa > > > >
