Thanks George! Nimish
On Mon, Jan 30, 2012 at 7:08 PM, George Peck <gp...@aoc.nrao.edu> wrote: > Hi Nimish, > > We use a 3M IDC (Insulation Displacement) connector. It is necessary to > also buy a ribbon cable, and crimp the cable on to the connector. A part > number is 3M 89120-0001. > > Perhaps a better solution would be to buy a cable. You can buy the cable > with a female connector at only one end, such as 3m M1AXK-2036R, or you can > buy a cable with female connectors at both ends, such as 3M M3AAK-2036R. > Both cables are 36 inches long, but are available in other lengths. > > George > > > > Nimish Sane wrote: > >> Hi all, >> >> We want to use the GPIO pins available on the Roach boards. Is there any >> recommended or widely used part to connect to the on-board GPIO header? Or, >> could anyone share the product specifics if they are using one? >> >> Thanks, >> >> Nimish >> >