Hmm... it's been a little while since I dealt with this glibc issue on our system, so its entirely possible I was mistaken about needing both 32 and 64 bit versions. Does XST work for you with the changes you've made so far?
Sorry if I said something wrong. -Alex On Wed, Oct 10, 2012 at 3:07 PM, Ricardo Finger <rfing...@gmail.com> wrote: > Now i got it! > Thanks for the clarification. > i did extract the i386 and x86_64 files to the same directory and run > rpm -Uvh --oldpackage *.rpm > but i got a bunch of conflicts messages like these > > conflicts with file from package glibc-headers-2.5-65.x86_64 > file /usr/include/sys/io.h from install of > glibc-headers-2.5-65.i386 conflicts with file from package > glibc-headers-2.5-65.x86_64 > file /usr/include/sys/perm.h from install of > glibc-headers-2.5-65.i386 conflicts with file from package > glibc-headers-2.5-65.x86_64 > file /usr/include/sys/procfs.h from install of > glibc-headers-2.5-65.i386 conflicts with file from package > glibc-headers-2.5-65.x86_64 > file /usr/include/sys/reg.h from install of > glibc-headers-2.5-65.i386 conflicts with file from package > glibc-headers-2.5-65.x86_64 > file /usr/include/sys/ucontext.h from install of > glibc-headers-2.5-65.i3 > > is it bad? > > > On Wed, Oct 10, 2012 at 5:28 PM, Alex Zahn <avzah...@gmail.com> wrote: > > It looks like you tried to install the x86_64 and src rpm's. What I > meant to > > say is that you should install both the x86_64 and i386 rpm's (given of > > course that you have a 64 bit system). The src tarball only contains > rpm's > > that contain source code and instructions for creating the installable > rpm's > > in the glibc-2.5-65.el5.i386.tar.gz and glibc-2.5-65.el5.x86_64.tar.gz > > tarballs. > > > > If I recall correctly, the x86_64 rpms actually depend on the i386 rpms. > 64 > > bit systems definitely need both 32 and 64 bit versions of glibc. It's > > probably a good idea not to have a version mismatch between the two. In > case > > something goes wrong (there's no guarantee that something will, however), > > you should unpack the i386 tarball and install everything in it as > before. > > > > Also, rpm -Uvh threw an error on encountering src rpm's, but again, those > > don't do anything. > > > > -Alex > > > > On Wed, Oct 10, 2012 at 9:44 AM, Ricardo Finger <rfing...@gmail.com> > wrote: > >> > >> Hello Alex and Ivan. > >> Thanks for your help. > >> Now the system is compiling! > >> > >> I finally installed glibc 2.6-65 from Alex's link, but I had to use the > >> --nodeps option to go through i.e: > >> > >> rpm -Uvh --oldpackage --nodeps *.rpm > >> > >> it might not be totally advisable to deactivate the dependencies > >> checking.... but it worked! > >> > >> Cheers, > >> > >> Ricardo. > >> > >> > >> > >> On 10-10-2012 9:37, Ricardo Finger wrote: > >> > >> Hello Alex, > >> > >> I downloaded and extracted glibc-2.5-65.el5.x86_64.tar.gz and > >> glibc-2.5-65.src.rpm.tar.gz to the same directory and run rpm, but it > seems > >> it doesn't work: please see the log. > >> I tried to compile after that, but the same error appears. > >> > >> [root@suseradio glibc-2.5-65.el5.x86_64.tar.gz_FILES]# ls > >> glibc-2.5-65.x86_64.rpm glibc-headers-2.5-65.x86_64.rpm > >> glibc-common-2.5-65.x86_64.rpm glibc-utils-2.5-65.x86_64.rpm > >> glibc-debuginfo-2.5-65.x86_64.rpm nscd-2.5-65.x86_64.rpm > >> glibc-devel-2.5-65.x86_64.rpm > >> [root@suseradio glibc-2.5-65.el5.x86_64.tar.gz_FILES]# > >> [root@suseradio glibc-2.5-65.el5.x86_64.tar.gz_FILES]# rpm -Uvh > >> --oldpackage *.rpm > >> warning: glibc-2.5-65.src.rpm: Header V3 DSA signature: NOKEY, key ID > >> 192a7d7d > >> error: Failed dependencies: > >> glibc-common = 2.5-81.el5_8.7 is needed by (installed) > >> glibc-2.5-81.el5_8.7.i686 > >> [root@suseradio glibc-2.5-65.el5.x86_64.tar.gz_FILES]# > >> > >> > >> > >> > >> On 08-10-2012 18:56, Alex Zahn wrote: > >> > >> The latest version is too new, and the oldest version in the > repositories > >> now is too new as well. > >> > >> I built the newest compatible glibc rpms and put them at > >> betacage.caltech.edu > >> > >> If you download and unpack the two non-source tarballs to the same > >> directory, you can install the rpms just with > >> > >> rpm -Uvh --oldpackage *.rpm > >> > >> -Alex > >> > >> On Mon, Oct 8, 2012 at 3:24 PM, Ricardo Finger <rfing...@gmail.com> > wrote: > >>> > >>> Hello Alex, > >>> > >>> Running yum install glibc I am getting this: > >>> > >>> Package glibc-2.5-81.el5_8.7.x86_64 already installed and latest > version > >>> Package glibc-2.5-81.el5_8.7.i686 already installed and latest version > >>> > >>> so it seem i am working with 2.5, which it seems to be the latest > >>> version in the repository I have. > >>> is it too new? > >>> > >>> I tried: > >>> yum downgrade glibc > >>> but it failed with a missing dependency error. > >>> > >>> Ricardo. > >>> > >>> > >>> On Mon, Oct 8, 2012 at 6:58 PM, Alex Zahn <avzah...@gmail.com> wrote: > >>> > Do you know what version of glibc you have? The default on RHEL 5.8 > is > >>> > too > >>> > new for use with ISE 11. > >>> > > >>> > -Alex > >>> > > >>> > On Mon, Oct 8, 2012 at 2:24 PM, Ricardo Finger <rfing...@gmail.com> > >>> > wrote: > >>> >> > >>> >> Dear Casperites, > >>> >> > >>> >> I am trying to make a Centos 5.8 64bit / Matlab2009b / ISE 11.4 / > >>> >> glibc-2.5 to work. I followed the steps of the "Xilin ISE 11.4 > Setup" > >>> >> wiki page, but when I try to compile any design (even the most > simples > >>> >> one) I got the following error: > >>> >> > >>> >> ======= Memory map: ======== > >>> >> > >>> >> //// many lines //// > >>> >> > >>> >> 2ad363fd8000-2ad363fed000 r-xp 00000000 fd:00 43811577 > >>> >> /usr/local/hdl/Xilinx/11.1/ISE/lib/lin64/libUtilC_QualityData.so > >>> >> 2ad363fed000-2ad3640ec000 ---p 00015000 fd:00 43811577 > >>> >> /usr/local/hdl/Xilinx/11.1/ISE/lib/lin64/libUtilC_QualityData.so > >>> >> 2ad3640ec000-2ad3640ee000 rw-p 00014000 fd:00 43811577 > >>> >> /usr/local/hdl/Xilinx/11.1/ISE/lib/lin64/libUtilC_QualityData.so > >>> >> 7fff7f0a1000-7fff7f0f0000 rw-p 7ffffffaf000 00:00 0 > >>> >> [stack] > >>> >> 7fff7f187000-7fff7f18a000 r-xp 7fff7f187000 00:00 0 > >>> >> [vdso] > >>> >> ffffffffff600000-ffffffffffe00000 ---p 00000000 00:00 0 > >>> >> [vsyscall] > >>> >> ERROR:EDK - xst: application received signal 6. > >>> >> ERROR:EDK:546 - Aborting XST flow execution! > >>> >> > >>> >> Running NGCBUILD ... > >>> >> > >>> >> Rebuilding cache ... > >>> >> ERROR:EDK:440 - platgen failed with errors! > >>> >> gmake: *** [implementation/system.bmm] Error 2 > >>> >> ERROR:EDK - Error while running "gmake -f system.make bits". > >>> >> Return code = 2 > >>> >> No changes to be saved in MSS file > >>> >> Saved project XMP file > >>> >> cp: cannot stat `implementation/system.bit': No such file or > directory > >>> >> bit file open failed > >>> >> chmod: cannot access `implementation/system.bof': No such file or > >>> >> directory > >>> >> cp: cannot stat `implementation/system.bof': No such file or > directory > >>> >> > >>> >> Error using ==> gen_xps_files at 689 > >>> >> Programation files generation failed, EDK compilation probably also > >>> >> failed. > >>> >> >> > >>> >> > >>> >> The error is the same no matter what Casper library I am using, and > I > >>> >> haven't found anything similar on the mail list. > >>> >> I would highly appreciate any hint. > >>> >> > >>> >> Cheers, > >>> >> > >>> >> Ricardo. > >>> >> > >>> >> -- > >>> >> Ricardo Finger Camus > >>> >> Electrical Engineer > >>> >> Astronomy Department > >>> >> University of Chile > >>> >> Of: 56(2)9771122 > >>> >> Casilla 36-D, Santiago. > >>> >> http://www.das.uchile.cl/lab_mwl/ > >>> >> > >>> > > >>> > >>> > >>> > >>> -- > >>> Ricardo Finger Camus > >>> Electrical Engineer > >>> Astronomy Department > >>> University of Chile > >>> Of: 56(2)9771122 > >>> Casilla 36-D, Santiago. > >>> http://www.das.uchile.cl/lab_mwl/ > >> > >> > >> > >> -- > >> Ricardo Finger Camus > >> Electrical Engineer > >> Astronomy Department > >> University of Chile > >> Of: 56(2)9771150 > >> Casilla 36-D, Santiago. > >> http://www.das.uchile.cl/lab_mwl/ > >> > >> > >> -- > >> Ricardo Finger Camus > >> Ingeniero ElĂ©ctrico > >> Departamento de AstronomĂa > >> Universidad de Chile > >> Of: 56(2)9771150 > >> Casilla 36-D, Santiago. > >> www.das.uchile.cl/lab_mwl/ > > > > > > > > -- > Ricardo Finger Camus > Electrical Engineer > Astronomy Department > University of Chile > Of: 56(2)9771122 > Casilla 36-D, Santiago. > http://www.das.uchile.cl/lab_mwl/ >