Yeah, if you want to use the udp mod i think you'll need to update your
python program to use udp rather than telnet to communicate. My memory is
hazy, but i think the ibob udp memo describes how to do that in general.
On Mar 15, 2014 7:38 PM, "Rolando Paz" <flx...@gmail.com> wrote:

> Yes, this is with the UDP modification.
> My real problem is that when I run the command "init_poco.py
> i8_c256.config", I get the error that you see in the picture attached.
> What do you think?
>
> Rolando Paz
>
>
>
>
>
>
> 2014-03-15 17:24 GMT-06:00 G Jones <glenn.calt...@gmail.com>:
>
>> Is this with the udp modification? If i recall that disables the telnet
>> interface. Everything can still be accessed by the udp protocol.
>>
>> Glenn
>> On Mar 15, 2014 7:20 PM, "Rolando Paz" <flx...@gmail.com> wrote:
>>
>>> Hi all.
>>>
>>> I have trouble connecting IBOB  with TELNET.
>>>
>>> The IBOB IP address is: 169.254.49.32
>>> The PC IP address is : 169.254.49.13
>>>
>>>  When I do a "ping 169.254.49.32", I get response from IBOB, but when i
>>> do "telnet 169.254.49.32", arise this error:
>>>
>>> Trying 169.254.49.32
>>> telnet: Unable to connect to remote host: Connection refused
>>>
>>> I'm using ubuntu 13.04.
>>>
>>> I also have a winxp virtual machine inside ubuntu 13.04, and when i use
>>> Hyper Terminal (com1), I have no problem to access the IBOB.
>>>
>>> Someone have any advice?
>>>
>>> Best Regards
>>>
>>> Rolando Paz
>>>
>>
>

Reply via email to