Hello all,
With all of the different pfb/fft blocks, I've gotten a bit confused. Some of 
the terminology used on the wiki is a bit unclear to me (simultaneous streams 
vs simultaneous inputs vs parallel time samples) which has led to this confusion
Anyway, I'm trying to build a spectrometer (a la tutorial 3) for the adc16x250, 
with the adc running 16 channel at 200 Msamp/s (so no demuxing). This gives me 
16 inputs that are fed into a pfb/fft block combo. I'm concerned that I am 
somehow getting those 16 inputs mixed up in the pfb or fft. 
Here are the blocks and parameters I'm using right now:pfb_fir_real with size: 
2^10, Taps: 4, Simultaneous Inputs: 2^2, and the Make Biplex box is not 
checked.fft_biplex_real_4x with size: 2^10 and Simultaneous Inputs 4^1.This 
gives me 4 inputs/outputs on each of the blocks which are just wired straight 
through.

With this, the fft outputs seem ok-ish. I get a peak at the right frequency 
channel, but the sidelobe behavior is pretty terrible. I get high sidelobes 
that sometimes extend out 20-30 bins on either side of the main peak.
Any advice you can give would be great.
Jay Brady                                         

Reply via email to