I think that's the wrong place. You want something in the implementation directory if i recall correctly. Glenn On Jul 4, 2014 11:05 AM, "Rolando Paz" <flx...@gmail.com> wrote:
> When the design is compiled, several folders are created. > The XPS_IBOB_base folder is one of them, and inside this folder is created > the Software folder, and inside this folder is created the main.c file. > I remove this main.c file created by the compilation, and I copy the new > main.c in the same directory. > > C:/i_poco4_1024ch_v007/XPS_iBOB_base/Software/main.c > > Thanks Glenn, I will do the test you suggested me. > > Rolando Paz > > > > > 2014-07-04 8:39 GMT-06:00 G Jones <glenn.calt...@gmail.com>: > >> Yeah, somehow it looks like the new main.c you are trying to use is not >> getting included. Where are you putting the main.c? One thing you can try >> is instead of putting your new main.c in there, try just deleting the >> main.c that is there and try the run init_bram. If it does not fail, then >> that means the main.c you are replacing is not the one it is using... >> >> >> On Fri, Jul 4, 2014 at 10:31 AM, Rolando Paz <flx...@gmail.com> wrote: >> >>> Hi Glenn >>> >>> Yes, I communicate with the IBOB over ethernet. >>> >>> I found what you see in the attached images. >>> >>> After running the following commands, with the Aaron bit file programed >>> inside the IBOB, the bram transmission was initialized. >>> >>> regwrite ctrl_sw 0x03ff >>> regwrite sync_gen/period 149504000 >>> startudpdump >>> >>> When I run the same commands with my bit file inside the IBOB, I found >>> that the command startudpdump is not there! >>> >>> That's why I think I'm doing something wrong, so the main.c does not >>> modify the PowerPC code, and hence is not programmed startudpdum. >>> >>> >>> >>> >>> >>> 2014-07-04 8:04 GMT-06:00 G Jones <glenn.calt...@gmail.com>: >>> >>> Hi Rolando, >>>> I think you mentioned that you are able to communicate with the IBOB >>>> over ethernet. Is that correct? Can you read and set registers using the >>>> UDP interface? If so, then the communication is working and the problem is >>>> not the communication itself. >>>> >>>> Glenn >>>> >>>> >>>> On Fri, Jul 4, 2014 at 9:59 AM, Rolando Paz <flx...@gmail.com> wrote: >>>> >>>>> Hi again everyone! >>>>> >>>>> I do not know if some one still remember this ... :-) but I will do >>>>> the question: >>>>> >>>>> I'm trying to modify the PowerPC code which interacts with LWIP in >>>>> order to automate the transmission of the shared BRAM from my correlator, >>>>> but I was unable accomplish it. >>>>> >>>>> I'm using CMD (WINXP) to do this: >>>>> >>>>> The new main.c file is located in the following directory: >>>>> >>>>> C:/i_poco4_1024ch_v007/XPS_iBOB_base/Software/main.c >>>>> >>>>> Then I run the following commands, inside the following directory: >>>>> >>>>> Directory: >>>>> >>>>> C:/i_poco4_1024ch_v007/XPS_iBOB_base/ >>>>> >>>>> Commands: >>>>> >>>>> > xps -nw system.xmp >>>>> > run init_bram >>>>> >>>>> >>>>> This is the output of "run init_bram": >>>>> >>>>> XPS% run init_bram >>>>> powerpc-eabi-gcc -Os >>>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/Software/main >>>>> .c /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/Software/tinysh.c >>>>> /cygdrive/c/i >>>>> _poco4_1024ch_v007/XPS_iBOB_base/drivers/core_util.c >>>>> /cygdrive/c/i_poco4_1024ch_ >>>>> v007/XPS_iBOB_base/drivers/xps_xsg/clk.c >>>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBO >>>>> B_base/drivers/xps_xsg/devices.c >>>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/d >>>>> rivers/xps_xsg/memory.c >>>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/drivers/xp >>>>> s_sw_reg/reg.c >>>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/drivers/xps_lwip/fi >>>>> fo.c >>>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/drivers/xps_lwip/lwipinit.c >>>>> / >>>>> cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/drivers/xps_lwip/lwiputil.c >>>>> /cygdri >>>>> ve/c/i_poco4_1024ch_v007/XPS_iBOB_base/drivers/xps_bram/bram.c >>>>> /cygdrive/c/i_poc >>>>> o4_1024ch_v007/XPS_iBOB_base/drivers/core_info.c -o >>>>> Software/executable.elf \ >>>>> -Wl,-T >>>>> -Wl,/cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/Software/LinkerScr >>>>> ipt.lwip -I./ppc405_1/include/ -ISoftware/ -Idrivers/ >>>>> -Idrivers/xps_xsg/ -I >>>>> drivers/xps_sw_reg/ -Idrivers/xps_lwip/ -Idrivers/xps_bram/ >>>>> -L./ppc405_1/lib/ >>>>> \ >>>>> -DLWIP_ENABLE -llwip4 >>>>> In file included from ./ppc405_1/include/netif/etharp.h:43, >>>>> from ./ppc405_1/include/netif/xemacliteif.h:42, >>>>> from >>>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/Software/mai >>>>> n.c:24: >>>>> ./ppc405_1/include/lwip/ip.h:125: warning: 'packed' attribute ignored >>>>> for field >>>>> of type 'struct ip_addr' >>>>> ./ppc405_1/include/lwip/ip.h:126: warning: 'packed' attribute ignored >>>>> for field >>>>> of type 'struct ip_addr' >>>>> In file included from ./ppc405_1/include/netif/xemacliteif.h:42, >>>>> from >>>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/Software/mai >>>>> n.c:24: >>>>> ./ppc405_1/include/netif/etharp.h:50: warning: 'packed' attribute >>>>> ignored for fi >>>>> eld of type 'u8_t[5u]' >>>>> ./ppc405_1/include/netif/etharp.h:56: warning: 'packed' attribute >>>>> ignored for fi >>>>> eld of type 'struct eth_addr' >>>>> ./ppc405_1/include/netif/etharp.h:57: warning: 'packed' attribute >>>>> ignored for fi >>>>> eld of type 'struct eth_addr' >>>>> ./ppc405_1/include/netif/etharp.h:65: warning: 'packed' attribute >>>>> ignored for fi >>>>> eld of type 'struct eth_hdr' >>>>> ./ppc405_1/include/netif/etharp.h:70: warning: 'packed' attribute >>>>> ignored for fi >>>>> eld of type 'struct eth_addr' >>>>> ./ppc405_1/include/netif/etharp.h:71: warning: 'packed' attribute >>>>> ignored for fi >>>>> eld of type 'struct ip_addr' >>>>> ./ppc405_1/include/netif/etharp.h:72: warning: 'packed' attribute >>>>> ignored for fi >>>>> eld of type 'struct eth_addr' >>>>> ./ppc405_1/include/netif/etharp.h:73: warning: 'packed' attribute >>>>> ignored for fi >>>>> eld of type 'struct ip_addr' >>>>> ./ppc405_1/include/netif/etharp.h:79: warning: 'packed' attribute >>>>> ignored for fi >>>>> eld of type 'struct eth_hdr' >>>>> ./ppc405_1/include/netif/etharp.h:80: warning: 'packed' attribute >>>>> ignored for fi >>>>> eld of type 'struct ip_hdr' >>>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/Software/main.c: In >>>>> function 'star >>>>> tudpdump_cmd': >>>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/Software/main.c:184: >>>>> warning: assi >>>>> gnment makes pointer from integer without a cast >>>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/Software/main.c: In >>>>> function 'main >>>>> ': >>>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/Software/main.c:416: >>>>> warning: inco >>>>> mpatible implicit declaration of built-in function 'memcpy' >>>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/Software/main.c:437: >>>>> warning: inco >>>>> mpatible implicit declaration of built-in function 'memcpy' >>>>> In file included from ./ppc405_1/include/netif/etharp.h:43, >>>>> from ./ppc405_1/include/netif/xemacliteif.h:42, >>>>> from >>>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/drivers/xps_ >>>>> lwip/lwipinit.c:10: >>>>> ./ppc405_1/include/lwip/ip.h:125: warning: 'packed' attribute ignored >>>>> for field >>>>> of type 'struct ip_addr' >>>>> ./ppc405_1/include/lwip/ip.h:126: warning: 'packed' attribute ignored >>>>> for field >>>>> of type 'struct ip_addr' >>>>> In file included from ./ppc405_1/include/netif/xemacliteif.h:42, >>>>> from >>>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/drivers/xps_ >>>>> lwip/lwipinit.c:10: >>>>> ./ppc405_1/include/netif/etharp.h:50: warning: 'packed' attribute >>>>> ignored for fi >>>>> eld of type 'u8_t[5u]' >>>>> ./ppc405_1/include/netif/etharp.h:56: warning: 'packed' attribute >>>>> ignored for fi >>>>> eld of type 'struct eth_addr' >>>>> ./ppc405_1/include/netif/etharp.h:57: warning: 'packed' attribute >>>>> ignored for fi >>>>> eld of type 'struct eth_addr' >>>>> ./ppc405_1/include/netif/etharp.h:65: warning: 'packed' attribute >>>>> ignored for fi >>>>> eld of type 'struct eth_hdr' >>>>> ./ppc405_1/include/netif/etharp.h:70: warning: 'packed' attribute >>>>> ignored for fi >>>>> eld of type 'struct eth_addr' >>>>> ./ppc405_1/include/netif/etharp.h:71: warning: 'packed' attribute >>>>> ignored for fi >>>>> eld of type 'struct ip_addr' >>>>> ./ppc405_1/include/netif/etharp.h:72: warning: 'packed' attribute >>>>> ignored for fi >>>>> eld of type 'struct eth_addr' >>>>> ./ppc405_1/include/netif/etharp.h:73: warning: 'packed' attribute >>>>> ignored for fi >>>>> eld of type 'struct ip_addr' >>>>> ./ppc405_1/include/netif/etharp.h:79: warning: 'packed' attribute >>>>> ignored for fi >>>>> eld of type 'struct eth_hdr' >>>>> ./ppc405_1/include/netif/etharp.h:80: warning: 'packed' attribute >>>>> ignored for fi >>>>> eld of type 'struct ip_hdr' >>>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/drivers/xps_lwip/lwipinit.c: >>>>> In fu >>>>> nction 'lwipinit': >>>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/drivers/xps_lwip/lwipinit.c:243: >>>>> w >>>>> arning: incompatible implicit declaration of built-in function 'memcpy' >>>>> In file included from ./ppc405_1/include/lwip/tcp.h:44, >>>>> from >>>>> /cygdrive/c/i_poco4_1024ch_v007/XPS_iBOB_base/drivers/xps_ >>>>> lwip/lwiputil.c:12: >>>>> ./ppc405_1/include/lwip/ip.h:125: warning: 'packed' attribute ignored >>>>> for field >>>>> of type 'struct ip_addr' >>>>> ./ppc405_1/include/lwip/ip.h:126: warning: 'packed' attribute ignored >>>>> for field >>>>> of type 'struct ip_addr' >>>>> powerpc-eabi-size Software/executable.elf >>>>> text data bss dec hex filename >>>>> 57400 1528 1857072 1916000 1d3c60 Software/executable.elf >>>>> >>>>> ********************************************* >>>>> Initializing BRAM contents of the bitstream >>>>> ********************************************* >>>>> bitinit system.mhs -pe ppc405_1 Software/executable.elf \ >>>>> -bt implementation/system.bit -o implementation/download.bit >>>>> >>>>> bitinit version Xilinx EDK 10.1.03 Build EDK_K_SP3.6 >>>>> Copyright (c) Xilinx Inc. 2002. >>>>> >>>>> Parsing MHS File system.mhs... >>>>> >>>>> Overriding IP level properties ... >>>>> >>>>> Performing IP level DRCs on properties... >>>>> >>>>> Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC... >>>>> Address Map for Processor ppc405_1 >>>>> (0b0000010000-0b0000010011) ppc405_1 >>>>> (0b0000100000-0b0000100011) ppc405_1 >>>>> (0000000000-0x001fffff) plb_sram_0 plb >>>>> (0xd0000000-0xd00000ff) >>>>> i_poco4_1024ch_v007_acc_len plb->plb2opb_bridge_0->opb0 >>>>> (0xd0000100-0xd00001ff) >>>>> i_poco4_1024ch_v007_acc_num plb->plb2opb_bridge_0->opb0 >>>>> (0xd0000200-0xd00002ff) >>>>> i_poco4_1024ch_v007_adc_sum_sq plb->plb2opb_bridge_0->opb0 >>>>> (0xd0000300-0xd00003ff) >>>>> i_poco4_1024ch_v007_ctrl_sw plb->plb2opb_bridge_0->opb0 >>>>> (0xd0000400-0xd00004ff) >>>>> i_poco4_1024ch_v007_eq_coeff plb->plb2opb_bridge_0->opb0 >>>>> (0xd0002000-0xd0003fff) >>>>> i_poco4_1024ch_v007_ibob_lwip_ethlite plb->plb2opb_bridge_0->opb0 >>>>> (0xd0004000-0xd00040ff) >>>>> i_poco4_1024ch_v007_ibob_lwip_macbits plb->plb2opb_bridge_0->opb0 >>>>> (0xd0004100-0xd00041ff) >>>>> i_poco4_1024ch_v007_sync_gen1_period plb->plb2opb_bridge_0->opb0 >>>>> (0xd0006000-0xd0007fff) >>>>> i_poco4_1024ch_v007_xengine4_aa_real plb->plb2opb_bridge_0->opb0 >>>>> (0xd0008000-0xd0009fff) >>>>> i_poco4_1024ch_v007_xengine4_ab_imag plb->plb2opb_bridge_0->opb0 >>>>> (0xd000a000-0xd000bfff) >>>>> i_poco4_1024ch_v007_xengine4_ab_real plb->plb2opb_bridge_0->opb0 >>>>> (0xd000c000-0xd000dfff) >>>>> i_poco4_1024ch_v007_xengine4_ac_imag plb->plb2opb_bridge_0->opb0 >>>>> (0xd000e000-0xd000ffff) >>>>> i_poco4_1024ch_v007_xengine4_ac_real plb->plb2opb_bridge_0->opb0 >>>>> (0xd0ffdd00-0xd0ffddff) opb_clockcontroller_0 >>>>> plb->plb2opb_bridge_0->opb0 >>>>> (0xd0ffdf00-0xd0ffdfff) RS232_UART_1 plb->plb2opb_bridge_0->opb0 >>>>> (0xd1000000-0xd1001fff) >>>>> i_poco4_1024ch_v007_xengine4_ad_imag plb->plb2opb_bridge_opb1->opb1 >>>>> (0xd1002000-0xd1003fff) >>>>> i_poco4_1024ch_v007_xengine4_ad_real plb->plb2opb_bridge_opb1->opb1 >>>>> (0xd1004000-0xd1005fff) >>>>> i_poco4_1024ch_v007_xengine4_bb_real plb->plb2opb_bridge_opb1->opb1 >>>>> (0xd1006000-0xd1007fff) >>>>> i_poco4_1024ch_v007_xengine4_bc_imag plb->plb2opb_bridge_opb1->opb1 >>>>> (0xd1008000-0xd1009fff) >>>>> i_poco4_1024ch_v007_xengine4_bc_real plb->plb2opb_bridge_opb1->opb1 >>>>> (0xd100a000-0xd100bfff) >>>>> i_poco4_1024ch_v007_xengine4_bd_imag plb->plb2opb_bridge_opb1->opb1 >>>>> (0xd100c000-0xd100dfff) >>>>> i_poco4_1024ch_v007_xengine4_bd_real plb->plb2opb_bridge_opb1->opb1 >>>>> (0xd100e000-0xd100ffff) >>>>> i_poco4_1024ch_v007_xengine4_cc_real plb->plb2opb_bridge_opb1->opb1 >>>>> (0xd1010000-0xd1011fff) >>>>> i_poco4_1024ch_v007_xengine4_cd_imag plb->plb2opb_bridge_opb1->opb1 >>>>> (0xd1012000-0xd1013fff) >>>>> i_poco4_1024ch_v007_xengine4_cd_real plb->plb2opb_bridge_opb1->opb1 >>>>> (0xd1014000-0xd1015fff) >>>>> i_poco4_1024ch_v007_xengine4_dd_real plb->plb2opb_bridge_opb1->opb1 >>>>> (0xffff0000-0xffffffff) plb_bram_if_cntlr_1 plb >>>>> Address Map for Processor ppc405_0 >>>>> (0b0000010000-0b0000010011) ppc405_0 >>>>> (0b0000100000-0b0000100011) ppc405_0 >>>>> >>>>> Initializing Memory... >>>>> Checking ELFs associated with PPC405 instance ppc405_1 for overlap... >>>>> >>>>> >>>>> Analyzing file Software/executable.elf... >>>>> Running Data2Mem with the following command: >>>>> data2mem -bm "implementation/system_bd" -bt >>>>> "implementation/system.bit" -bd >>>>> "Software/executable.elf" tag ppc405_1 -o b >>>>> implementation/download.bit >>>>> Memory Initialization completed successfully. >>>>> >>>>> 0 >>>>> XPS% >>>>> >>>>> >>>>> If anyone has any suggestions I would appreciate it very much! :-) >>>>> >>>>> Best Regards >>>>> >>>>> Rolando Paz >>>>> >>>>> >>>> >>> >> >
