hi Tom,
I am not sure whether your problems been solved. If not,you can try to
download some files in the
website(https://casper.berkeley.edu/wiki/MSSGE_Setup_with_Xilinx_14.x_and_Matlab_2012b
) and add them to your /pcores as it said. If you can simulate the tut2.mdl
well,It's probabley a problem of the version of your EDK.
good luck!
peter niu
At 2014-08-12 03:15:50, casper-requ...@lists.berkeley.edu wrote:
>Send casper mailing list submissions to
> casper@lists.berkeley.edu
>
>To subscribe or unsubscribe via the World Wide Web, visit
>
> https://calmail.berkeley.edu/manage/list/listinfo/casper@lists.berkeley.edu
>
>or, via email, send a message with subject or body 'help' to
> casper-requ...@lists.berkeley.edu
>
>You can reach the person managing the list at
> casper-ow...@lists.berkeley.edu
>
>When replying, please edit your Subject line so it is more specific
>than "Re: Contents of casper digest..."
>
>
>Today's Topics:
>
> 1. broadcom BCM8747 (shu.lean)
> 2. Problem running tutorial 2 (Geelen, T.F.G.)
> 3. Re: Problem running tutorial 2 (Jack Hickish)
> 4. Re: Problem running tutorial 2 (Geelen, T.F.G.)
> 5. Re: Problem running tutorial 2 (Jack Hickish)
>
>
>----------------------------------------------------------------------
>
>Message: 1
>Date: Mon, 11 Aug 2014 14:49:45 +0800 (CST)
>From: "shu.lean" <shu.l...@163.com>
>Subject: [casper] broadcom BCM8747
>To: casper <casper@lists.berkeley.edu>
>Message-ID: <ecd69b7.70c1.147c3d46fde.coremail.shu.l...@163.com>
>Content-Type: text/plain; charset="gbk"
>
>Hi all,
>
>
>Do anyone here have any experiences in Broadcom's PHY chip BCM8747?
>
>
>I have a Xilinx Virtex 6 FPGA board and a 10 gigabit ethernet expansion board
>that has 4 PHY chips (BCM8747). There are ZD connectors between the two
>boards. And I came across some problems. I am sure that the supply voltage
>and the reference clock (156.25 MHz) of the PHY are OK. And I also have made a
>testing of eye diagram for the trasmitter and the reciever of XAUI. Both of
>the eye's width and height meet the requirements of BCM8747 data sheet. But it
>has a problem in sychoronization and alignment of the four lanes. The four
>lanes(one port) can't be sychoronized and aligned even I configured the PHY to
>the independent lane loopback operation mode(It connects the XAUI deserializer
>output directly to the XAUI serializer input). I also tried to configure the
>PHY to be 1 Gbe bypass mode and made a loopback. It was not linked up, either.
>
>
>Has anyone met problems like these yet?
>
>
>Thank you very much!
>
>
>Best wishes,
>
>
>Lin
>-------------- next part --------------
>An HTML attachment scrubbed and removed.
>HTML attachments are only available in MIME digests.
>
>------------------------------
>
>Message: 2
>Date: Mon, 11 Aug 2014 17:57:07 +0000
>From: "Geelen, T.F.G." <t.f.g.gee...@student.tue.nl>
>Subject: [casper] Problem running tutorial 2
>To: CASPER Mailing List <casper@lists.berkeley.edu>
>Message-ID:
> <05475c4daa397d479a606082fdf4731806911...@xserver23a.campus.tue.nl>
>Content-Type: text/plain; charset="us-ascii"
>
>Hello,
>
>I am trying to work out how the GBe connection works. I have downloaded
>tutorial 2 from the casper website and replaced all the erroneous software
>blocks.
>I am running Matlab R2012b and Xilinx 14.5.
>
>As soon as I start to compile and he revves the design up to version 14.5 I
>get a couple of errors immediatly after. Can someone give me a tip as to how
>to solve this error?
>
>Kind regards,
>
>Tom
>
>Moving all revup related files to 'revup' folder...
>
>Format revision of project to EDK 14.5 completed
>ERROR:EDK - IPNAME: kat_ten_gb_eth, INSTANCE: tut2_gbe0 - PARAMETER TTL not
> found in the MPD -
> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs
> line
> 417
>ERROR:EDK - IPNAME: kat_ten_gb_eth, INSTANCE: tut2_gbe3 - PARAMETER TTL not
> found in the MPD -
> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs
> line
> 485
>WARNING:EDK - IPNAME: opb_bram_if_cntlr, INSTANCE: tut2_snap_gbe0_tx_bram_lsb -
> Superseded core for architecture 'virtex5sx' -
> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs
> line
> 751
>WARNING:EDK - IPNAME: opb_bram_if_cntlr, INSTANCE: tut2_snap_gbe0_tx_bram_msb -
> Superseded core for architecture 'virtex5sx' -
> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs
> line
> 781
>WARNING:EDK - IPNAME: opb_bram_if_cntlr, INSTANCE: tut2_snap_gbe0_tx_bram_oob -
> Superseded core for architecture 'virtex5sx' -
> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs
> line
> 811
>ERROR:EDK - while loading XMP file
>
>XPS% Evaluating file run_xps.tcl
>ERROR:EDK - Load a MHS or XMP file first
>Error using gen_xps_files (line 638)
>XPS failed.
>
>
>------------------------------
>
>Message: 3
>Date: Mon, 11 Aug 2014 11:13:48 -0700
>From: Jack Hickish <jackhick...@gmail.com>
>Subject: Re: [casper] Problem running tutorial 2
>To: "Geelen, T.F.G." <t.f.g.gee...@student.tue.nl>
>Cc: CASPER Mailing List <casper@lists.berkeley.edu>
>Message-ID:
> <cag1gksknqrlnfx9sfhuy9v56qk75gsjxh6xrbzzxeegwe_g...@mail.gmail.com>
>Content-Type: text/plain; charset=UTF-8
>
>Hi Tom,
>
>This is a library version issue. I've been useless and haven't yet
>pushed the up-to-date library to the casper-astro repository. I shall
>do this now (though it might take a few minutes for me to download and
>push the correct stuff to github).
>
>Jack
>
>On 11 August 2014 10:57, Geelen, T.F.G. <t.f.g.gee...@student.tue.nl> wrote:
>> Hello,
>>
>> I am trying to work out how the GBe connection works. I have downloaded
>> tutorial 2 from the casper website and replaced all the erroneous software
>> blocks.
>> I am running Matlab R2012b and Xilinx 14.5.
>>
>> As soon as I start to compile and he revves the design up to version 14.5 I
>> get a couple of errors immediatly after. Can someone give me a tip as to how
>> to solve this error?
>>
>> Kind regards,
>>
>> Tom
>>
>> Moving all revup related files to 'revup' folder...
>>
>> Format revision of project to EDK 14.5 completed
>> ERROR:EDK - IPNAME: kat_ten_gb_eth, INSTANCE: tut2_gbe0 - PARAMETER TTL not
>> found in the MPD -
>> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs
>> line
>> 417
>> ERROR:EDK - IPNAME: kat_ten_gb_eth, INSTANCE: tut2_gbe3 - PARAMETER TTL not
>> found in the MPD -
>> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs
>> line
>> 485
>> WARNING:EDK - IPNAME: opb_bram_if_cntlr, INSTANCE:
>> tut2_snap_gbe0_tx_bram_lsb -
>> Superseded core for architecture 'virtex5sx' -
>> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs
>> line
>> 751
>> WARNING:EDK - IPNAME: opb_bram_if_cntlr, INSTANCE:
>> tut2_snap_gbe0_tx_bram_msb -
>> Superseded core for architecture 'virtex5sx' -
>> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs
>> line
>> 781
>> WARNING:EDK - IPNAME: opb_bram_if_cntlr, INSTANCE:
>> tut2_snap_gbe0_tx_bram_oob -
>> Superseded core for architecture 'virtex5sx' -
>> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs
>> line
>> 811
>> ERROR:EDK - while loading XMP file
>>
>> XPS% Evaluating file run_xps.tcl
>> ERROR:EDK - Load a MHS or XMP file first
>> Error using gen_xps_files (line 638)
>> XPS failed.
>
>
>
>------------------------------
>
>Message: 4
>Date: Mon, 11 Aug 2014 18:20:49 +0000
>From: "Geelen, T.F.G." <t.f.g.gee...@student.tue.nl>
>Subject: Re: [casper] Problem running tutorial 2
>To: Jack Hickish <jackhick...@gmail.com>
>Cc: CASPER Mailing List <casper@lists.berkeley.edu>
>Message-ID: <xpwh6hl5kksa7u7mh5hcdhpu.1407781247...@email.android.com>
>Content-Type: text/plain; charset="us-ascii"
>
>Hi Jack,
>
>Thank you, I'll be waiting for the new push on the repository. Thanks already!
>
>Groetjes,
>
>Tom Geelen
>
>Jack Hickish <jackhick...@gmail.com> wrote:
>
>
>Hi Tom,
>
>This is a library version issue. I've been useless and haven't yet
>pushed the up-to-date library to the casper-astro repository. I shall
>do this now (though it might take a few minutes for me to download and
>push the correct stuff to github).
>
>Jack
>
>On 11 August 2014 10:57, Geelen, T.F.G. <t.f.g.gee...@student.tue.nl> wrote:
>> Hello,
>>
>> I am trying to work out how the GBe connection works. I have downloaded
>> tutorial 2 from the casper website and replaced all the erroneous software
>> blocks.
>> I am running Matlab R2012b and Xilinx 14.5.
>>
>> As soon as I start to compile and he revves the design up to version 14.5 I
>> get a couple of errors immediatly after. Can someone give me a tip as to how
>> to solve this error?
>>
>> Kind regards,
>>
>> Tom
>>
>> Moving all revup related files to 'revup' folder...
>>
>> Format revision of project to EDK 14.5 completed
>> ERROR:EDK - IPNAME: kat_ten_gb_eth, INSTANCE: tut2_gbe0 - PARAMETER TTL not
>> found in the MPD -
>> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs
>> line
>> 417
>> ERROR:EDK - IPNAME: kat_ten_gb_eth, INSTANCE: tut2_gbe3 - PARAMETER TTL not
>> found in the MPD -
>> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs
>> line
>> 485
>> WARNING:EDK - IPNAME: opb_bram_if_cntlr, INSTANCE:
>> tut2_snap_gbe0_tx_bram_lsb -
>> Superseded core for architecture 'virtex5sx' -
>> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs
>> line
>> 751
>> WARNING:EDK - IPNAME: opb_bram_if_cntlr, INSTANCE:
>> tut2_snap_gbe0_tx_bram_msb -
>> Superseded core for architecture 'virtex5sx' -
>> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs
>> line
>> 781
>> WARNING:EDK - IPNAME: opb_bram_if_cntlr, INSTANCE:
>> tut2_snap_gbe0_tx_bram_oob -
>> Superseded core for architecture 'virtex5sx' -
>> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs
>> line
>> 811
>> ERROR:EDK - while loading XMP file
>>
>> XPS% Evaluating file run_xps.tcl
>> ERROR:EDK - Load a MHS or XMP file first
>> Error using gen_xps_files (line 638)
>> XPS failed.
>
>
>
>------------------------------
>
>Message: 5
>Date: Mon, 11 Aug 2014 11:51:23 -0700
>From: Jack Hickish <jackhick...@gmail.com>
>Subject: Re: [casper] Problem running tutorial 2
>To: "Geelen, T.F.G." <t.f.g.gee...@student.tue.nl>
>Cc: CASPER Mailing List <casper@lists.berkeley.edu>
>Message-ID:
> <CAG1GKS=pxguhnpuc_l7ptrcqbosvhsqgjn9orbxwfv7xdc5...@mail.gmail.com>
>Content-Type: text/plain; charset=UTF-8
>
>Hi Tom,
>
>This is done. If you pull from
>https://github.com/casper-astro/mlib_devel.git you should be good to
>go with the tutorials (this is the branch we used at the workshop).
>
>Note that if you're doing a fresh clone you'll have to add back in the
>deprecated pcores (see
>https://casper.berkeley.edu/wiki/MSSGE_Setup_with_Xilinx_14.x_and_Matlab_2012b#Tweaks_to_be_able_to_compile)
>
>The startup proceedure has also changed slightly. After cloning the
>repository, rather than editing startsg (which is tracked in git), you
>should create a separate file named startsg.local, which contains your
>location-specific matlab/xilinx install paths. A sample is given on
>the wiki page I linked, but basically you just need a file with three
>lines (eg):
>
>export MATLAB_PATH=/opt/MATLAB/R2012b
>export XILINX_PATH=/opt/Xilinx/14.7/ISE_DS
>export XILINX_PLATFORM=lin64
>
>appropriately set for your install.
>
>Let me know if you have any problems,
>
>Jack
>
>
>
>
>On 11 August 2014 11:20, Geelen, T.F.G. <t.f.g.gee...@student.tue.nl> wrote:
>> Hi Jack,
>>
>> Thank you, I'll be waiting for the new push on the repository. Thanks
>> already!
>>
>> Groetjes,
>>
>> Tom Geelen
>>
>> Jack Hickish <jackhick...@gmail.com> wrote:
>>
>>
>> Hi Tom,
>>
>> This is a library version issue. I've been useless and haven't yet
>> pushed the up-to-date library to the casper-astro repository. I shall
>> do this now (though it might take a few minutes for me to download and
>> push the correct stuff to github).
>>
>> Jack
>>
>> On 11 August 2014 10:57, Geelen, T.F.G. <t.f.g.gee...@student.tue.nl> wrote:
>>> Hello,
>>>
>>> I am trying to work out how the GBe connection works. I have downloaded
>>> tutorial 2 from the casper website and replaced all the erroneous software
>>> blocks.
>>> I am running Matlab R2012b and Xilinx 14.5.
>>>
>>> As soon as I start to compile and he revves the design up to version 14.5 I
>>> get a couple of errors immediatly after. Can someone give me a tip as to
>>> how to solve this error?
>>>
>>> Kind regards,
>>>
>>> Tom
>>>
>>> Moving all revup related files to 'revup' folder...
>>>
>>> Format revision of project to EDK 14.5 completed
>>> ERROR:EDK - IPNAME: kat_ten_gb_eth, INSTANCE: tut2_gbe0 - PARAMETER TTL not
>>> found in the MPD -
>>> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs
>>> line
>>> 417
>>> ERROR:EDK - IPNAME: kat_ten_gb_eth, INSTANCE: tut2_gbe3 - PARAMETER TTL not
>>> found in the MPD -
>>> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs
>>> line
>>> 485
>>> WARNING:EDK - IPNAME: opb_bram_if_cntlr, INSTANCE:
>>> tut2_snap_gbe0_tx_bram_lsb -
>>> Superseded core for architecture 'virtex5sx' -
>>> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs
>>> line
>>> 751
>>> WARNING:EDK - IPNAME: opb_bram_if_cntlr, INSTANCE:
>>> tut2_snap_gbe0_tx_bram_msb -
>>> Superseded core for architecture 'virtex5sx' -
>>> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs
>>> line
>>> 781
>>> WARNING:EDK - IPNAME: opb_bram_if_cntlr, INSTANCE:
>>> tut2_snap_gbe0_tx_bram_oob -
>>> Superseded core for architecture 'virtex5sx' -
>>> /home/s070562/Desktop/DOMT/GBE_connection/tut2/XPS_ROACH_base/system.mhs
>>> line
>>> 811
>>> ERROR:EDK - while loading XMP file
>>>
>>> XPS% Evaluating file run_xps.tcl
>>> ERROR:EDK - Load a MHS or XMP file first
>>> Error using gen_xps_files (line 638)
>>> XPS failed.
>
>
>
>End of casper Digest, Vol 81, Issue 7
>*************************************
