Hi,Jonathan
This is the problem,I am using a passive divider used for RF signals.
I also find a link in casper website:
https://casper.berkeley.edu/wiki/16_way_1PPS_driver
The 1pps is called for a special divider.I will find one.
Thanks for your help!
Peter







At 2015-01-30 10:29:48, "Jonathan Weintroub" <[email protected]> wrote:
>Hi Peter, 
>
>I have no input on operation of the PAPER bit code, just some tips on 1PPS 
>distribution. Are you using a passive power divider of the type used for RF 
>signals?  Mini circuits or similar?  This, or cascaded BNC or SMA T-s are not 
>well suited to distributing multiple copies of a 1PPS signal with integrity. 
>
>There are a few solutions. We use CMOS distribution amplifiers from Stanford 
>Research Systems.
>
>http://www.thinksrs.com/
>
>You can configure the distribution amplifier you need from this page:
>
>http://www.thinksrs.com/products/FS730-3.htm
>
>(Can’t link directly to a sample product but be sure to select a base or main 
>frame, and add the CMOS distribution amplifier “Internal Option”.
>
>Good luck.
>
>Jonathan
>
>
>
>> On Jan 29, 2015, at 9:00 PM, Peter Niu <[email protected]> wrote:
>> 
>> Hi, David,
>> We are facing a sync problem.We deployed 8 ROACH2s in our system now.Taught 
>> as the PAPER model ,I connect a 1pps in the sync_in port of pf1,and put 
>> signal out from sync_out of pf1 into the sync_in of pf2,and so on. When I 
>> run the paper_init.rb to initial all the 8 ROACHes,However The different 
>> ROACH has their own sequence of MCNT . Different ROACH(different FID) send 
>> the different MCNT in the same time,which should stay the same.
>> I thought it is a 1PPS sync problem ,I want to use a power divider to split 
>> the 1PPS signal into 8 ways to each ROACH.But the power divider did not work 
>> in our lab. (I thought the power divider need to be special) Do you have 
>> some good suggestions?
>> Thanks for your help again!
>> Peter
>> 
>> 
>

Reply via email to