hi louis, how big are your packets? the bigger the better. (eg: 8KByte jumbo packets are best).
the max data rate into a server is usually limited by packets per second, not bytes per second. i recommend using the hashpipe data transport modules for high bandwidth high packet rate data transfer. i think there's a new casper tutorial on how to use hashpipe. the code was originally developed by nrao for pulsar machines. originally called guppi, hashpipe was adapted by david macmahon for more general use. hashpipe is used in correlators, beamformers, pulsar, fast radio burst, and seti machines. best wishes, dan On Wed, Jun 29, 2016 at 9:58 PM, Louis P. Dartez <[email protected]> wrote: > Hi all, > Can anyone guide me on what tools are being used for packet capture > purposes right now? I’ve been working on a baseband recorder using a ROACH1 > using the 10GbE lines but I can’t seem to avoid losing packets when writing > data to memory or disk. I wrote a threaded packet sniffer in C with a > pretty tight loop that write directly to memory in Ubuntu Linux. I’m > wondering if there are any optimizations that I could be missing out. > > > Any advice would be greatly appreciated, Thanks in advance! > LD > > Louis P. Dartez > > Ph.D. Candidate > > STARGATE > > Center for Advanced Radio Astronomy > > University of Texas Rio Grande Valley > > (956) 372-5812 > > >

