Hi, Gunter, You can read about resynth_netlist.m in the log message that added it…
https://github.com/casper-astro/mlib_devel/commit/dee90ed You can also run "help resynth_netlist" to get info that is in the doc comments at the top of the script. Despite what these things might say, I’m pretty sure you can use this script to resynthsize the setlist that system generate creates. I think you can do this using the following steps: 1) run casper_xps and only check the first few boxes through "Xlinx System Generator" and click "Run XPS". 2) run resynth_netlist from the matlab command prompt with the options you want to resynthesize the netlist that system generator built. 3) Go back to the casper_xps dialog and uncheck the boxes through "Xilinx System Generator", check the boxes after that, and click "Run XPS" to finish the build. Hope this helps, Dave > On Jul 11, 2016, at 1:34 AM, Guenter Knittel <[email protected]> > wrote: > > Hi Dave, > > thanks for the info. However, I’m not quite sure where it is supposed to be > used in the > casper_xps toolflow. Are there some instructions available? > > > Hi Wesley, > > thanks, I looked into the file, it has the option ShiftReg already set to > “No”, so it appears as > if it is not used as source for default XST parameters (setting it to “Yes” > didn’t help) . > > Cheers > Gunter > > > From: Wesley New [mailto:[email protected]] > Sent: Freitag, 8. Juli 2016 11:48 > To: David MacMahon > Cc: Guenter Knittel; casper list > Subject: Re: [casper] XST options > > Hi Gunter, > > Also take a look at xps_base/XPS_ROACH2_base/system.xmp > > There is an option for ShiftReg. I have not played with it myself, but it > might be what you are looking for. > > Wesley New > South African SKA Project > +2721 506 7300 > www.ska.ac.za <http://www.ska.ac.za/> > > > > On Thu, Jul 7, 2016 at 5:49 PM, David MacMahon <[email protected] > <mailto:[email protected]>> wrote: > Hi, Gunter, > > I think you are looking for the resynth_netlist function found in mlib_devel > as the file resynth_netlist.m. I think the comments make it rather > self-explanatory, but please let me know (via the mailing list) if it's not > quite what you're after. > > Cheers, > Dave > > On Jul 7, 2016, at 08:38, Guenter Knittel <[email protected] > <mailto:[email protected]>> wrote: > >> Hi, >> >> I’m new to this list, and I would be grateful if somebody could give me a >> hint. >> I’m trying to speed-optimize a completed and working SL design, and it >> appears >> as if an old topic is a main problem. This is the default XST option to merge >> a chain of FFs into a shift register. >> What I’m trying to accomplish is to run casper_xps with the right XST options >> from the start. What I have learned so far is that the XST options are >> written >> into the file system_xst.scr, which is re-generated before each run. The file >> fast_runtime.opt only applies to tools running after XST. >> Now I’m trying to figure out which tool is actually assembling this scr >> file, and >> where it gets the options from. In the hope that I can change the default >> behavior. >> Can somebody give me a pointer? Or is my approach fundamentally wrong? >> >> Thanks a lot >> Gunter >> from MPIfR Bonn

