Hi All,
I have a Roach2 design using the one_Gbe yellow block. I intermittently have
timing errors in this block seemingly unrelated to the design. Below is a
TS_mac_rx_clk timing constraint failure. The FPGA is running at 125 MHz and
approximately 50% of the resources are currently being utilized. The design
only sends data out of the interface. Any ideas on what is causing this or how
to fix it?
================================================================================
Timing constraint: TS_mac_rx_clk = PERIOD TIMEGRP "mac_rx_clk" 125 MHz HIGH
50%;
For more information, see Period Analysis in the Timing Closure User Guide
(UG612).
12625 paths analyzed, 2332 endpoints analyzed, 4 failing endpoints
4 timing errors detected. (4 setup errors, 0 hold errors, 0 component switching
limit errors)
Minimum period is 8.157ns.
--------------------------------------------------------------------------------
Slack: -0.157ns (requirement - (data path - clock path skew +
uncertainty))
Source:
fort_adm_rsp_bb_one_GbE/fort_adm_rsp_bb_one_GbE/enable_cpu_tx.cpu_buffer_tx/BU2/U0/blk_mem_generator/valid.cstr/ramloop[0].ram.r/v6_noinit.ram/TRUE_DP.SIMPLE_PRIM36.ram
(RAM)
Destination: temac_inst/temac_inst/emac_wrapper_inst/v6_emac (CPU)
Requirement: 8.000ns
Data Path Delay: 7.893ns (Levels of Logic = 3)
Clock Path Skew: -0.229ns (1.919 - 2.148)
Source Clock: mac_mac_rx_clk rising at 0.000ns
Destination Clock: mac_mac_rx_clk rising at 8.000ns
Clock Uncertainty: 0.035ns
Clock Uncertainty: 0.035ns ((TSJ^2 + TIJ^2)^1/2 + DJ) / 2 + PE
Total System Jitter (TSJ): 0.070ns
Total Input Jitter (TIJ): 0.000ns
Discrete Jitter (DJ): 0.000ns
Phase Error (PE): 0.000ns
Maximum Data Path at Slow Process Corner:
fort_adm_rsp_bb_one_GbE/fort_adm_rsp_bb_one_GbE/enable_cpu_tx.cpu_buffer_tx/BU2/U0/blk_mem_generator/valid.cstr/ramloop[0].ram.r/v6_noinit.ram/TRUE_DP.SIMPLE_PRIM36.ram
to temac_inst/temac_inst/emac_wrapper_inst/v6_emac
Location Delay type Delay(ns) Physical
Resource
Logical
Resource(s)
---------------------------------------------------------------
-------------------
RAMB36_X6Y36.DOBDO1 Trcko_DOB 2.073
fort_adm_rsp_bb_one_GbE/fort_adm_rsp_bb_one_GbE/enable_cpu_tx.cpu_buffer_tx/BU2/U0/blk_mem_generator/valid.cstr/ramloop[0].ram.r/v6_noinit.ram/TRUE_DP.SIMPLE_PRIM36.ram
fort_adm_rsp_bb_one_GbE/fort_adm_rsp_bb_one_GbE/enable_cpu_tx.cpu_buffer_tx/BU2/U0/blk_mem_generator/valid.cstr/ramloop[0].ram.r/v6_noinit.ram/TRUE_DP.SIMPLE_PRIM36.ram
SLICE_X127Y181.C6 net (fanout=2) 1.727
fort_adm_rsp_bb_one_GbE/fort_adm_rsp_bb_one_GbE/cputx_tx_rd_data<1>
SLICE_X127Y181.C Tilo 0.068
fort_adm_rsp_bb_one_GbE/fort_adm_rsp_bb_one_GbE/gbe_tx_inst/mac_data_reg<1>2
fort_adm_rsp_bb_one_GbE/fort_adm_rsp_bb_one_GbE/gbe_tx_inst/mac_data_reg<1>2
SLICE_X127Y181.D3 net (fanout=1) 0.333
fort_adm_rsp_bb_one_GbE/fort_adm_rsp_bb_one_GbE/gbe_tx_inst/mac_data_reg<1>1
SLICE_X127Y181.D Tilo 0.068
fort_adm_rsp_bb_one_GbE/fort_adm_rsp_bb_one_GbE/gbe_tx_inst/mac_data_reg<1>2
fort_adm_rsp_bb_one_GbE/fort_adm_rsp_bb_one_GbE/gbe_tx_inst/mac_data_reg<1>3
SLICE_X133Y180.D5 net (fanout=1) 0.719
fort_adm_rsp_bb_one_GbE/fort_adm_rsp_bb_one_GbE/gbe_tx_inst/mac_data_reg<1>2
SLICE_X133Y180.DMUX Tilo 0.191
fort_adm_rsp_bb_one_GbE_app_dbg_data<0>
fort_adm_rsp_bb_one_GbE/fort_adm_rsp_bb_one_GbE/gbe_tx_inst/mac_data_reg<1>4
TEMAC_X0Y1.CLIENTEMACTXD1 net (fanout=1) 2.527
fort_adm_rsp_bb_one_GbE_app_dbg_data<1>
TEMAC_X0Y1.CLIENTEMACTXCLIENTCLKIN Tmacdck_TXD 0.187
temac_inst/temac_inst/emac_wrapper_inst/v6_emac
temac_inst/temac_inst/emac_wrapper_inst/v6_emac
---------------------------------------------------------------
---------------------------
Total 7.893ns (2.587ns
logic, 5.306ns route)
Please consider the environment before printing this e-mail.
DISCLAIMER:
This message is intended for the use of the addressee and may contain
information that is privileged and/or confidential. If you are not the intended
recipient, you are hereby notified that any dissemination, distribution or
copying of the information contained in this message is strictly unauthorized
and prohibited. If you have received this message in error, please notify the
sender by reply e-mail and delete the message from your system. Opinions,
conclusions, or other statements in this message that do not relate to the
business of REUTECH Radar Systems, a Division of Reutech Ltd., its subsidiaries
or affiliates, are neither given nor endorsed by REUTECH Radar Systems, a
Division of Reutech (Pty)Ltd.