Hello Heystek,

I vaguely recall installing spead from pip as well, as Ryan has done here.
Give that a whirl.

Regards,
James


On Fri, Oct 7, 2016 at 11:06 AM, Ryan Monroe <[email protected]>
wrote:

> rmonroe@rmonroe-ThinkPad-P50:~$ sudo pip install spead
> [sudo] password for rmonroe:
> The directory '/home/rmonroe/.cache/pip/http' or its parent directory is
> not owned by the current user and the cache has been disabled. Please check
> the permissions and owner of that directory. If executing pip with sudo,
> you may want sudo's -H flag.
> The directory '/home/rmonroe/.cache/pip' or its parent directory is not
> owned by the current user and caching wheels has been disabled. check the
> permissions and owner of that directory. If executing pip with sudo, you
> may want sudo's -H flag.
> Collecting spead
>   Downloading spead-0.5.1.tar.gz (61kB)
>     100% |████████████████████████████████| 71kB 1.5MB/s
> Installing collected packages: spead
>   Running setup.py install for spead ... done
> Successfully installed spead-0.5.1
> rmonroe@rmonroe-ThinkPad-P50:~$ ipython
> Python 2.7.12 (default, Jul  1 2016, 15:12:24)
> Type "copyright", "credits" or "license" for more information.
>
> IPython 2.4.1 -- An enhanced Interactive Python.
> ?         -> Introduction and overview of IPython's features.
> %quickref -> Quick reference.
> help      -> Python's own help system.
> object?   -> Details about 'object', use 'object??' for extra details.
>
> In [1]: import spead
>
> In [2]:
>
>
> On 10/07/2016 02:04 AM, Heystek Grobler wrote:
>
> Hi James
>
> I installed the PySpead package but I get the following error when I run
> the tut3.py script:
>
> ImportError: No mode named spead
>
> Do you perhaps have any ideas on how to solve it?
>
> Thank you!!
>
> Heystek
>
> On Fri, Oct 7, 2016 at 11:01 AM, James Smith <[email protected]> wrote:
>
>> Hello Heystek,
>>
>> If you're still in the Python environment, then PySpead is the one you
>> want.
>>
>> Regards,
>> James
>>
>>
>> On Fri, Oct 7, 2016 at 10:59 AM, Heystek Grobler <
>> [email protected]> wrote:
>>
>>> Good Day
>>>
>>> After a while of troubleshooting I determined the connection with TCP/IP
>>> into the board was correct. I updated the file system and kernel of the
>>> ROACH2 and now I can program it.
>>>
>>> I only need to install a package called spead in order to use the .bof
>>> file with tutorial 3 of CASPER.
>>>
>>> Where can a download the spead package from? I can only find PySpead and
>>> Spead2.
>>>
>>> Thanks for everyones help
>>>
>>> Heystek!
>>>
>>> On Fri, Sep 30, 2016 at 5:28 PM, Adam Isaacson <[email protected]>
>>> wrote:
>>>
>>>> Hi Heystek,
>>>>
>>>> If you want to telnet, which is another way of configuring your board,
>>>> then you need to state the port. Are you doing the following from the
>>>> terminal:
>>>>
>>>> 1)Telnet to port 7147: "telnet <ip> 7147".
>>>>
>>>> 2)?progremote fpgfile.fpg
>>>>
>>>> You say you can ping your board, so you should be able to connect via
>>>> casperfpga, as you mentioned above. Did you do what James suggested i.e.
>>>> try running fpga.is_connected()? if it reports "True" then you are
>>>> connected and if false then you will need to debug further. Are you sure
>>>> that the IP you are pinging is your roach2 - may sound like a silly
>>>> question, but I don't know your setup.
>>>>
>>>> Kind Regards,
>>>>
>>>> Adam
>>>>
>>>>
>>>> On Fri, Sep 30, 2016 at 3:38 PM, Heystek Grobler <
>>>> [email protected]> wrote:
>>>>
>>>>> Hi James
>>>>>
>>>>> I will try it. Through the terminal I can ping the board, but I cant
>>>>> open a Telnet connection.
>>>>>
>>>>> When I open a ttyUSB connection to the Roach en monitor it, and try to
>>>>> upload the fga file, the Roach gives the same error "progremote"
>>>>>
>>>>> Thats why I'm confused
>>>>>
>>>>> Thanks for your help!
>>>>>
>>>>> I really appreciate it
>>>>>
>>>>> Heystek
>>>>>
>>>>>
>>>>> On Friday, 30 September 2016, James Smith <[email protected]> wrote:
>>>>>
>>>>>> Hello Heystek,
>>>>>>
>>>>>> Before you program the ROACH2, I'd suggest trying fpga.is_connected()
>>>>>> and fpga.est_clk_frequency() to check whether you can actually
>>>>>> communicate with the ROACH2. It might be a network cable that's been
>>>>>> unplugged by accident - that's where I've seen those errors before. The
>>>>>> fpga=casperfpga.katcp_fpga.KatcpFpga('roachname or ip_address')
>>>>>> doesn't actually throw an error if it can't connect to the ROACH2. This
>>>>>> information would at least help you narrow down the possibilities as to
>>>>>> what's wrong (i.e. whether it's the kernel on the ROACH2).
>>>>>>
>>>>>> Disclaimer: I work only on ROACH, but I'm fairly certain the
>>>>>> procedure would be the same.
>>>>>>
>>>>>> Regards,
>>>>>> James
>>>>>>
>>>>>>
>>>>>> On Fri, Sep 30, 2016 at 1:36 PM, Heystek Grobler <
>>>>>> [email protected]> wrote:
>>>>>>
>>>>>>> Good day everyone
>>>>>>>
>>>>>>> I am having difficulties programming the ROACH 2 board. I am
>>>>>>> following the instructions of CASPER tutorial one.
>>>>>>>
>>>>>>> I Have compiled the fpg file and is using the following steps from
>>>>>>> the tutorial.
>>>>>>>
>>>>>>> 1. I entered ipython into the terminal
>>>>>>> 2. import casperfpga
>>>>>>> 3. fpga=casperfpga.katcp_fpga.KatcpFpga('roachname or ip_address')
>>>>>>> with the ip address of my roach
>>>>>>> 4. fpga.upload_to_ram_and_program('your_fpgfile.fpg') with the
>>>>>>> location of the .fpga file
>>>>>>>
>>>>>>> but at point 4 I get the following error:
>>>>>>>
>>>>>>> RuntimeError                              Traceback (most recent
>>>>>>> call last)
>>>>>>> <ipython-input-6-bdb3ff92f6c0> in <module>()
>>>>>>> ----> 1 fpga.upload_to_ram_and_program('/home/heystek/simulink/ai_t1
>>>>>>> /bit_files/ai_t1_2016_Sep_14_2052.fpg')
>>>>>>>
>>>>>>> /usr/local/lib/python2.7/dist-packages/casperfpga/katcp_fpga.pyc in
>>>>>>> upload_to_ram_and_program(self, filename, port, timeout,
>>>>>>> wait_complete)
>>>>>>>     442         if request_result != '':
>>>>>>>     443             raise RuntimeError('progremote request(%s) on
>>>>>>> host %s failed' %
>>>>>>> --> 444                                (request_result, self.host))
>>>>>>>     445
>>>>>>>     446         # start the upload thread and join
>>>>>>>
>>>>>>> RuntimeError: progremote request(Request to client 192.168.33.4
>>>>>>> failed.) on host 192.168.33.4 failed
>>>>>>>
>>>>>>> Am I doing something wrong?
>>>>>>>
>>>>>>> I looked at the mail archives and it sugested that I update the
>>>>>>> kernel of the roach. Is this perhaps the problem? Or am I doing 
>>>>>>> something
>>>>>>> wrong?
>>>>>>>
>>>>>>> Have a wonderful day.
>>>>>>>
>>>>>>> Heystek
>>>>>>>
>>>>>>
>>>>>>
>>>>
>>>>
>>>> --
>>>>
>>>> Adam Isaacson
>>>>
>>>> DBE: FPGA Engineer
>>>>
>>>> SKA-SA
>>>>
>>>> 3rd Floor
>>>>
>>>> The Park
>>>>
>>>> Park Road
>>>>
>>>> Pinelands
>>>>
>>>> 7405
>>>>
>>>>
>>>> Tel: +27215067300 (W)
>>>>
>>>> Fax: +27215067375 (W)
>>>>
>>>> Cell: +27825639602
>>>>
>>>
>>>
>>
>
>

Reply via email to