Hi Alec (ccing list for posterity),

I don't know if there's a .fpg for tutorial 4 for ROACH 2 but I would
assume one must be around somewhere.

The error message you're seeing is a bit misleading: 'fpga' is not defined
because of an error in setting it up, so the exit_fail function is being
overly optimistic and trying to clean up the fpga before exiting.

>From ipython try running the lines of poco_init_master.py to see where it's
failing. It looks like it might be having some issue connecting to your
board.

Glenn

On Mon, Nov 7, 2016 at 7:02 PM, Alec Josaitis <[email protected]> wrote:

> Dear Glenn,
>
> Regarding your .fpg solutions: I just realized that the .fpg listed in this
> directory
> <https://github.com/casper-astro/tutorials_devel/tree/tutorials_update_2016/tut4>
> is programmed for a Roach, not Roach2! Is there a pre-compiled .fpg
> available for the roach2? The master branch of tutorial 4 is intended to
> run a .bof file, but when I try to run, using the proper .py script, I
> receive the following error:
>
> Connecting to server 192.168.4.20 on port 7147...  FAILURE DETECTED. Log
> entries:
> None
> Traceback (most recent call last):
>   File "poco_init_master.py", line 142, in <module>
>     exit_fail()
>   File "poco_init_master.py", line 21, in exit_fail
>     fpga.stop()
> NameError: global name 'fpga' is not defined
>
>
> I believe my katcp library is more-up-to-date than this script wants it to
> be, because my library works with .fpg files, rather than .bof. Is there an
> easy resolution to this which doesn't involve devolving my katcp library?
>
> Best,
> Alec
>
> On Mon, Nov 7, 2016 at 6:39 PM, Alec Josaitis <[email protected]> wrote:
>
>> Dear All,
>>
>> My apologies, above I meant to include the following hyperlink when I
>> stated "...this .mdl
>> <https://github.com/casper-astro/tutorials_devel/blob/master/tut4/poco_wide_12_r316_new.mdl.tar.gz>".
>> Also, to clarify, I am indeed using the tutorial- recommended versions of
>> software: Xilinx System Generator 14.7 and MATLAB 2012b.
>>
>> Best,
>> Alec
>>
>> On Mon, Nov 7, 2016 at 6:34 PM, Alec Josaitis <[email protected]> wrote:
>>
>>> Dear Glenn and Jack,
>>>
>>> Thanks for the response. I've re-cloned mlib_devel and checked-out the
>>> proper version ( 4c7ba5efb4
>>> <https://github.com/casper-astro/mlib_devel/commit/4c7ba5efb421fda1cec0640cf0e3b830a9987640>).
>>> I then re-downloaded, and un-tarred this .mdl, saved is as a .slx, and then
>>> opened it in matlab to run update_casper_blocks(bdroot).
>>> I've copied below the errors that appear. Also, I should note there are
>>> no .log files in any of the subdirectories inside the directory created by
>>> casper_xps.
>>>
>>> >> casper_xps
>>> Detected Linux OS
>>> #############################
>>> ##      System Update      ##
>>> #############################
>>> MATLAB:MException:MultipleErrors: Error due to multiple causes.
>>> Backtrace 1: reuse_block:51
>>> Backtrace 2: fft_stage_n_init:287
>>> Backtrace 3: reuse_block:138
>>> Backtrace 4: biplex_core_init:173
>>> Backtrace 5: reuse_block:138
>>> Backtrace 6: fft_biplex_real_4x_init:235
>>> Backtrace 7: gen_xps_files:203
>>> Backtrace 8: run_Callback:155
>>> Backtrace 9: casper_xps:88
>>> Backtrace 10: @(hObject,eventdata)casper_xps
>>> ('run_Callback',hObject,eventdata,guidata(hObject)):0
>>> Simulink:Masking:Bad_Init_Commands: Error in
>>> 'poco_wide_12_r316_new/fft_wideband_real/fft_biplex_real_4x/biplex_core/fft_stage_1':
>>> Initialization commands cannot be evaluated.
>>> Backtrace 1: reuse_block:138
>>> Backtrace 2: biplex_core_init:173
>>> Backtrace 3: reuse_block:138
>>> Backtrace 4: fft_biplex_real_4x_init:235
>>> Backtrace 5: gen_xps_files:203
>>> Backtrace 6: run_Callback:155
>>> Backtrace 7: casper_xps:88
>>> Backtrace 8: @(hObject,eventdata)casper_xps
>>> ('run_Callback',hObject,eventdata,guidata(hObject)):0
>>> MATLAB:MException:MultipleErrors: Error due to multiple causes.
>>> Backtrace 1: reuse_block:51
>>> Backtrace 2: fft_stage_n_init:287
>>> Backtrace 3: reuse_block:138
>>> Backtrace 4: biplex_core_init:173
>>> Backtrace 5: reuse_block:138
>>> Backtrace 6: fft_biplex_real_4x_init:235
>>> Backtrace 7: gen_xps_files:203
>>> Backtrace 8: run_Callback:155
>>> Backtrace 9: casper_xps:88
>>> Backtrace 10: @(hObject,eventdata)casper_xps
>>> ('run_Callback',hObject,eventdata,guidata(hObject)):0
>>> Simulink:Masking:Bad_Init_Commands: Error in
>>> 'poco_wide_12_r316_new/fft_wideband_real/fft_biplex_real_4x/biplex_core/fft_stage_1':
>>> Initialization commands cannot be evaluated.
>>> Backtrace 1: reuse_block:138
>>> Backtrace 2: biplex_core_init:173
>>> Backtrace 3: reuse_block:138
>>> Backtrace 4: fft_biplex_real_4x_init:235
>>> Backtrace 5: gen_xps_files:203
>>> Backtrace 6: run_Callback:155
>>> Backtrace 7: casper_xps:88
>>> Backtrace 8: @(hObject,eventdata)casper_xps
>>> ('run_Callback',hObject,eventdata,guidata(hObject)):0
>>> Simulink:Masking:Bad_Init_Commands: Error in
>>> 'poco_wide_12_r316_new/fft_wideband_real/fft_biplex_real_4x/biplex_core':
>>> Initialization commands cannot be evaluated.
>>> Backtrace 1: reuse_block:138
>>> Backtrace 2: fft_biplex_real_4x_init:235
>>> Backtrace 3: gen_xps_files:203
>>> Backtrace 4: run_Callback:155
>>> Backtrace 5: casper_xps:88
>>> Backtrace 6: @(hObject,eventdata)casper_xps
>>> ('run_Callback',hObject,eventdata,guidata(hObject)):0
>>> Warning: did not properly cleanup after previous model
>>> terminationWarning:
>>> sync_period_bits =
>>>
>>>     28
>>>
>>> Error using gen_xps_files (line 203)
>>> Error in 'poco_wide_12_r316_new/fft_wideband_real/fft_biplex_real_4x':
>>> Initialization commands cannot be evaluated.
>>> >>
>>>
>>> On Fri, Nov 4, 2016 at 5:22 PM, Jack Hickish <[email protected]>
>>> wrote:
>>>
>>>> Hi Alec,
>>>>
>>>> What version of the casper libraries are you using?
>>>>
>>>> The top of the tutorials page on the wiki states:
>>>> """
>>>>
>>>> These tutorials were constructed using Xilinx System Generator 14.7 and
>>>> MATLAB 2012b. Other mutually compatible versions of Xilinx and MATLAB tools
>>>> may work correctly, but have not been tested.
>>>>
>>>> These tutorials use the casper-astro repository, specifically git commit
>>>>  4c7ba5efb4
>>>> <https://github.com/casper-astro/mlib_devel/commit/4c7ba5efb421fda1cec0640cf0e3b830a9987640>
>>>>
>>>> If you plan to use these tutorials on your own system, you are most
>>>> likely to have success if you use these libraries. You can obtain them from
>>>> github:
>>>>
>>>> git clone git://github.com/casper-astro/mlib_devel.git
>>>>
>>>> cd mlib_devel
>>>>
>>>> git checkout 4c7ba5efb4
>>>> """
>>>>
>>>> I've no idea if this information is up to date, but is this what you
>>>> did?
>>>> If you're using a newer version of the libraries than the model was
>>>> saved in, you can try opening the model and running, in the matlab prompt:
>>>>
>>>> update_casper_blocks(bdroot)
>>>>
>>>> This will [try to] update all the blocks in the model to the latest
>>>> versions (the argument bdroot is a shortcut to the top level of your design
>>>> heirarchy). It'll take a while. After this script has completed, you
>>>> shouldn't have any broken links remaining.
>>>>
>>>> Cheers
>>>> Jack
>>>>
>>>> On Tue, 4 Oct 2016 at 16:51 Alec Josaitis <[email protected]> wrote:
>>>>
>>>>> Dear Casperites,
>>>>>
>>>>> I've been trying to complete tutorial 4
>>>>> <https://casper.berkeley.edu/wiki/Tutorial_Wideband_Pocket_Correlator>
>>>>> for the Roach2, and have run into difficulty compiling either the .slx
>>>>> <https://github.com/casper-astro/tutorials_devel/blob/tutorials_update_2016/tut4/poco_wide_12_r316_new.slx.r2013a.tar.gz>
>>>>> or .mdl
>>>>> <https://github.com/casper-astro/tutorials_devel/blob/tutorials_update_2016/tut4/poco_wide_12_r316_new.mdl.tar.gz>files
>>>>> given for the Roach 2, or uploading the precompoliled .fpg
>>>>> <https://github.com/casper-astro/tutorials_devel/blob/tutorials_update_2016/tut4/poco_wide_1kat.fpg>
>>>>> file onto my Roach2 (using either the python scripts given or simply by
>>>>> command-line uploading the .fpg using ipython). My error messages are
>>>>> attached in this Google Drive document.
>>>>> <https://docs.google.com/document/d/1RY5LSS7mRx3o2Zm6Gyy_a8jhEjJr2bM1k9CCN9ov0bw/edit?usp=sharing>
>>>>>
>>>>> For tutorials 1-3 I have had no trouble compiling the .slx files and
>>>>> upload the corresponding .fpg files to my Roach2.
>>>>>
>>>>> I've made sure in the .slx I cite above (for tutorial 4) that the
>>>>> XSG_core_config block does not have a broken link and that the settings 
>>>>> are
>>>>> as follows:
>>>>>
>>>>>
>>>>>    - Hardware platform: Roach2:sx475t
>>>>>    - User IP clock source: adc0_clk
>>>>>    - User IP clock rate (MHz): 200, (and that the adc1 and adc0 are
>>>>>    correspondingly clocked to 800 MHz)
>>>>>    - Sample period: 1
>>>>>    - Synthesis tool: XST
>>>>>
>>>>> Any advice on how I can complete tutorial 4?
>>>>>
>>>>>
>>>>> Best,
>>>>>
>>>>> Alec
>>>>>
>>>>>
>>>>>
>>>>>
>>>
>>
>

Reply via email to